• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.1
• /
• pp.23-30
• /
• 2010

The H.264/AVC is increasingly used in broadcast video applications such as Internet Protocol television (IPTV), digital multimedia broadcasting (DMB) because of high compression performance. But the H.264/AVC coded video can be delivered to the widespread end-user equipment for MPEG-2 after transcoding between this video standards. This paper suggests a new transcoding algorithm for H.264/AVC to MPEG-2 transcoder that uses motion vector clustering in order to reduce the complexity without loss of video quality. The proposed method is exploiting the motion information gathered during h.264 decoding stage. To reduce the search space for the MPEG-2 motion estimation, the predictive motion vector is selected with a least distortion of the candidated motion vectors. These candidate motion vectors are considering the correlation of direction and distance of motion vectors of variable blocks in H.264/AVC. And then the best predictive motion vector is refined with full-search in ${\pm}2$ pixel search area. Compared with a cascaded decoder-encoder, the proposed transcoder achieves computational complexity savings up to 64% with a similar PSNR at the constant bitrate(CBR).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.64-71
• /
• 2003

In this paper, we proposed an algorithm that shorten coding time maintaining image quality in JPEG2000, which is the standard, of still image compression. This method encodes only the bit plane selected as appropriate truncation point for output bitstream, obtained from estimation of frequency distribution for whole image. Wavelet characterized by multi-resolution has vertical, horizontal, and diagonal frequency components for each resolution. The frequency interrelation addressed above is maintained thorough whole level of resolution and represents the unique frequency characteristics for input image. Thus, using the frequency relation at highest level, we can pick the truncation point for the compression time decrease by estimating code bits at encoding each code block. Also, we reduced the encoding time using simply down sampling instead of low-pass filtering at low-levels which are not encoded in color component of lower energy than luminance component. From the proposed algorithm, we can reduce about 15~36% of encoding time maintaining PSNR 30$\pm$0.5㏈.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.790-800
• /
• 2009

For the improvement of coding efficiency, the H.264/AYC standard uses new coding tools such as 1/4-pel-accurate motion estimation, multiple references, intra prediction, loop filter, variable block size etc. Using these coding tools, H.264/AYC has achieved significant improvements from rate-distortion point of view compared to existing standards. However, the encoder complexity was greatly increased due to these coding tools. We focus on the complexity reduction method of intra macroblock mode selection. The proposed algorithm for fast intra mode selection calculates the edge activity in transform domain, and performs fast encoding of intra frame in H.264/AYC through the fast prediction mode selection of intra4x4 and chrominance blocks. Simulation results show that the proposed method saves about 59.76% for QCIF sequences and 65.03% for CIF sequences of total encoding time, while bitrate increase and PSNR decrease are very small.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.761-770
• /
• 2010

In this paper, we propose a new Frame Rate Up-Conversion (FRUC) scheme to increase the frame rate from a lower number into a higher one and enhance the decoded video quality at the decoder. The proposed algorithm utilizes the preliminary frames of forward and backward direction using bilateral prediction. In the process of the preliminary frames, an additional interpolation is performed for the occlusion area because if the calculated value of the block with reference frame if larger than the predetermine thresholdn the block is selected as the occlusion area. In order to interpolate the occlusion area, we perform re-search to obtain the osiomal block considerhe osiomnumber of available ne block consblock. The experimental results show that performance of the proposed algorithm has better PSNR and visual quality than the conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1049-1058
• /
• 2009

After the efficiency of H.264 video compression has been announced, it replaced MPEG-2 standard in several applications. So transcoding methods of MPEG-2 to H.264 have been studying because there are variety devices and contents followed by MPEG-2. Although H.264 supported various service such as IPTV, DMB, digital broadcasting etc, but users using MPEG-2 devices cannot accessible to them. This paper propose H.264 to MPEG-2 transcoding for users of MPEG-2 devices without displacement H.264. The proposed method predicted a motion vector for MPEG-2 encoder after it extracted from motion vectors of variable blocks in H.264 to improve processing time. Also it predicted a optimal motion vector using modified boundary matching algorithm after grasped a special character for boundary and background of object. The experimental results from proposed method show a considerable reduction in processing time, as much as 65% averagely, with a small objective quality reduction in PSNR.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.69-75
• /
• 2012

This paper presents a novel de-interlacing algorithm that can make up motion compensation errors by using maximum a posteriori (MAP) estimator. First, a proper registration is performed between a current field and its adjacent fields, and the progressive frame corresponding to the current field is found via MAP estimator based on the computed registration information. Here, in order to obtain a stable solution, well-known bilateral total variation (BTV)-based regularization is employed. Next, so-called feathering artifacts are detected on a block basis effectively. So, edge-directional interpolation is applied to the pixels where feathering artifact may happen, instead of the above-mentioned temporal de-interlacing. Experimental results show that the PSNR of the proposed algorithm is on average 4dB higher than that of previous studies and provides the better subjective quality than the previous works.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.68-77
• /
• 2009

A single field deinterlacing method, namely interpolation algorithm derived from low resolution (ILR), is presented in this paper. Traditional deinterlacing methods usually employ edge-based interpolation technique within pixel-based estimation. However, edge-based methods are somehow sensitive to noise and intensity variation in the image. Moreover, the methods are not satisfied in deciding the exact edge direction which controls the performance of the interpolation. In order to reduce the sensitivity, the proposed algorithm investigates low-resolution characteristics of the pixel to be interpolated, and applies it to high-resolution image. Simulation results demonstrates that the proposed method gives not only a better objective performance in terms of PSNR results compare to conventional edge-based interpolation methods, but also better subjective image quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1153-1161
• /
• 2005

The latest standard H.264 coding methods show better efficiency compared to the former coding standards from the rate distortion point of view, but also lead to high complexity. In this paper, we propose an adaptive and fast inter/intra prediction algorithm for H.264 video coding. In the inter prediction algorithm, an effective and simple mode selection method is proposed, which can adaptively adjust to motion estimation to reduce complexity. And proposed intra prediction algorithm reduces its complexity by using calculated Minimum Rate-Distortion costs in the prediction of Intra $16{\times}16$ and $4{\times}4$ modes. From experiment using JM8.4, our algorithm can reduce about $60.9\%$ of computation time as compared to JM, with only negligible PSNR and bitrate degradation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.676-682
• /
• 2002

In this paper, an effective stereo image compression and reconstruction technique using a new adaptively compensated-disparity prediction scheme is proposed. That is, by adaptively predicting the mutual correlation between the stereo image using the proposed method, the bandwidth of the stereo input image can be compressed to the level of the conventional 2D image and the predicted image also can be effectively reconstructed using this transmitted reference image and disparity data in the receiver. Especially, in the proposed method, once the feature values are extracted from the input stereo image, then the matching window size for the predicted image reconstruction is adaptively selected in accordance with the magnitude of this feature values. From this adaptive disparity estimation method, reduction of the mismatching probability of the disparity vectors is expected and as a result, the image quality in the reconstructed image can be improved. In addition, from some experiments using the CCETT's stereo images of 'Fichier', 'Manege' and 'Tunnel', it is shown that the proposed method improves the PSNR of the reconstructed image to about 9.08 dB on average by comparing with that of the conventional methods. And also, it is found that there is almost no difference between the original image and the predicted image reconstructed through the proposed method by comparison to that of the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.83-88
• /
• 2005

In this paper, detection based - adaptive windowed nonlinear filters(DB-AWNF) are proposed for removing one-side impulse noise in infrared image. They are composed of impulse detector and window-size-variable median filters. Impulse detector checks whether current pixel is impulse or not using range function and nonlinear location estimator. If impulse is detected, current pixel is filtered according to four kinds of local masks by use of median filter. If not. current pixel is delivered to output like identity filter. In qualitative view, the proposed could have removed heavy corrupted noise up to $20\%$ and reserved the details of image. In quantitative view, PSNR was measured. The proposed could have 13 - 31[dB] more improved performance than those of median($3{\times}3$) filter and 18 - 25[dB] more improved performance than those of median($5{\times}5$) filter.