• The Journal of the Korea Contents Association
• /
• 제17권10호
• /
• pp.360-375
• /
• 2017

As the level of people's demand for service quality provided by public institutions increases, interest in improving organizational effectiveness of internal members is increasing. In this context, this study aims to identify the predisposing factors affecting the job satisfaction and perceived job performance of public institution members. In this study, public service motivation, work autonomy, and person-system fit were presented as antecedents to verify the organizational effectiveness, and the results were tested by regression analysis. As a result, all three antecedents have significant effects on job satisfaction and perceived job performance. Public service motivation, work autonomy has a relatively higher impact on job satisfaction. On the other hand, person-system fit has a relatively higher influence on perceived job performance. In particular, the results of this study confirmed that PSM theory is consistent with the main trends and is significant in organizations created through artificial integration. This result suggests the need to maintain the effectiveness of the public organization in the future due to the change of integration of public organizations.

• KSBB Journal
• /
• 제9권3호
• /
• pp.312-318
• /
• 1994

The esterification of Ac-Tyr-OH was carried out in one-phase system containing ethanol by ${\alpha}$-chymotrypsin. The results of the esterification reaction are as follows. Chitin-${\alpha}$-chymotrypsin complex was found to be an effective catalyst for the esterlfication of Ac-Tyr-OH in ethanol organic solvent. The optimal conditions for the esterification were chitn/${\alpha}$-chymotrypsin ratio, 20(w/w); reaction temp., $35^{\circ}C$; reaction pH, 8.0; reaction time, 24 hrs. Also, addition of chitin in water/water-miscible organic solvent was effective for the stability of the enzyme. The esterification yield, Km and Vmax under optimal conditions were 93%, 3.093mM and 1.088mM/mg/hr, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제33권5호
• /
• pp.1969-1980
• /
• 2013

The Traffic congestion is caused by the increasing traffic demand. Thus, economic losses have been increasing every year. To solve these problems, car sharing and rental car systems that are equipped with IT technologies emerge. Car sharing has many advantages-the alleviation of the traffic congestion, the saving of maintenance cost for cars, the reduction of car possessiveness, the solution for the hassle of car ownership, for business and personal duty, and the improvement of connectivity between public transportations-. The goal of the car sharing is to achieve low-carbon and eco-friendly transportation. In this study, we review papers related to the car sharing system and the cost system of traffic systems. We estimate the optimal cost of the cloud traffic system that is one of the car sharing services. We suggest a methodology to estimate operational cost and use cost through the analysis of cost system between similar traffic means. The range of the maximum and minimum cost was determined through the comparison and analysis of similar traffic means. Expected demand and the cost that people are willing to pay were estimated through optimized value pricing. The minimum cost per hour that was compared to the cost of rental car was estimated at 5,333 won and the maximum cost per hour that was compared to taxi cost was estimated at 17,700 won. The cost for users was estimated at 6,930 won. The cost of 50% demands was estimated at 6,550won. Future studies should analyze service hours of users, weather, demand pattern and trend and consider them into the cost estimation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제16권4호
• /
• pp.22-29
• /
• 2002

Usually, much harmonics are included and cause harmonic loss of motor, torque pulsation, electro-magnetic noise and shock etc. by switching function of inverter when drive induction motor variableness inside. It applied partial resonant Buck converter and three phase voltage type SPWM inverter circuit to induction motor driving system in this paper that see to solve such problem. Changed operation condition variously to do input current of circuit that propose sine-wave by unit power factor almost and capacitor supplied bringing back to life voltage by power supply arranging properly assistance diode and electric power switching. Power factor and efficiency improved as that minimize variation of input at power supply voltage polarity reverse by that add voltage reversal function. Also, by using output filter, reduced harmonic of output line to line voltage components, and introduce state space analysis and forecast operation of rectifier. Such all items confirmed validity through simulation and an experiment.

• Fire Science and Engineering
• /
• 제30권5호
• /
• pp.1-8
• /
• 2016

Safety management in hazardous areas with potentially explosive gas atmospheres (here in after referred to as hazardous areas) in large scale facilities dealing with combustible or flammable materials at home and abroad is very important (significant) for the coexistence of the company and local society based on business continuity management (BCM) and reliance. For the safety management in hazardous areas, two systems are mainly used: (1) the control system for the prevention of combustible or flammable substances and (2) the explosion proof system for the elimination of ignition sources when flammable gases are leaked to inhibit the transition to fire or explosion accidents. While technology and regulations on explosion proof facilities or devices for electrical ignition sources are well developed and defined, those for thermal ignition sources need to be more developed and established. In this study, the internal combustion engine in hazardous areas was investigated to determine the risk of ignition. For this purpose, document searches were conducted on the relevant international standards and accidents cases and risk analysis reports. In addition, this study assessed the application cases of the diesel engine's safety equipment, such as spark arresters regarding the site of process safety management (PSM) system in central Korea. To practically apply these results to the hydrocarbon industry, the safety management method for explosion prevention in hazardous areas was provided by risk identification for ignition sources of internal combustion engines, such as diesel engines.

• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.217-224
• /
• 2003

To find out heating load and to determine the power of heat pump compressor for the Ondol room heating the COP of heat pump, the variation of Ondol room air temperature, the variation of ambient temperature and power consumption of heat pump are analyzed. The results from this study were summarized as follows: 1. The COP of the heat pump in close loop decreased as the ambient air temperature. The COP was 2.26 when the temperature difference of condenser was $20\pm3^{\circ}C$. 2. The Ondol surface temperature was $25\pm3^{\circ}C$ when the hot water of $40^{\circ}C$ was supplied from hot water storage tank to the Ondol and the temperature difference between the Ondol surface and the room air temperature was $7~8^{\circ}C$. 3. The ratio of thermal conduction heating load to total heating load in Ondol heating space was found to be 83% and ratio of ventilation heating load was 17%. Therefore, the thermal conduction heating load was confirmod to be a major heating load in Ondol heating space. 4. In case of the ambient temperature of $3.2^{\circ}C$, the efficiency of heat exchange of Ondol heating system was 85%. 5. The heating load per Ondol heating surface area and volume of Ondol room space were theoretically analyzed. In case of the room temperature of $20^{\circ}C$ and the ambient temperature of $-3.2~3.8^{\circ}C$, the heating load per Ondol surface area was 115.8~167.6kJ/h ㆍ㎥ and per Ondol mom space volume was 50.2~72.7kJ/h ㆍ㎥. 6. The compressor power of heat pump fur the Ondol room heating could be determined with the heating load analyzed in this study In case of the Ondol room air temperature of 17~2$0^{\circ}C$ and the ambient temperature of -5~3.8$^{\circ}C$, the compressor power of heat pump per Ondol surface area was analyzed to be $2.3\times10^{-2}psm^2$, and per volume of Ondol room space $1.0\times10^{-2}1.4\times10^{-2}ps/m^2$ps.