• Sleep Medicine and Psychophysiology
• /
• v.7 no.2
• /
• pp.115-119
• /
• 2000

Objectives Summary: A 20-year-old man was presented with a history of difficult waking for 10 years. He suffered from morning headache, chronic fatigue and mild daytime sleepiness but had no history of irresistible sleep attack, cataplexy, hypnagogic hallucination or sleep paralysis. Methods: Night polysomnography (PSG), multiple sleep latency test (MSLT) and HLA-typing were carried out. Results: The PSG showed short sleep latency (4.0 min) and REM latency (2.5 min), increased arousal index (15.7/hour), periodic limb movements during sleep (PLMS index=8.1/hr) with movement arousal index 2.1/hr and normal sleep efficiency (97.5%). The MSLT revealed normal sleep latency (15 min 21 sec) and 4 times sleep-onset REM (SOREM). HLA-typing showed DQ6- positive, that corresponded at the genomic level to the subregion DQB1*0601, which was different from the usual locus in narcolepsy patients (DQB1*0602 and DQA1*0102). Conclusion: Differential diagnosis should be made with circadian rhythm disorder and other causes of primary waking disorder. The possibility of a variant type of narcolepsy could be suggested with an unusual clinical manifestation and a new genetic marker.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1449-1456
• /
• 2016

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2000.10a
• /
• pp.52-52
• /
• 2000

No Abstract.See Full-text

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.92-95
• /
• 1997

Because of the novel characteristics such as chemical stability, hardness, electrical resistivity and thermal conductivity, diamond-like carbon (DLC) film is a suitable material for the passivation layers. For this purpose, using the PECVD, DLC films were synthesized at room temperature. The adhesion and the hardness of the DLC films deposited on Si an SiO2 substrate were measured. The resistivity of 5.3$\times$$10^8$$\Omega$.cm was measured by automatic spreading resistance probe analysis method. The thermal conductivities of different DLC films were measured and compared with that of phospho silicate glass (PSG) film which is commonly used as passivation layers. The thermal conductivity of DLC film was improved by increasing hydrogen flow rate up to 90 sccm and was better than that of PSG film. The patterning techniques of the DLC film developed using the RIE and the lift-off method to form 5$\mu\textrm{m}$ line. Finally, the thermal characteristics of the power transistor with the DLC film as passiviation layer was analyzed.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.488-494
• /
• 2003

We have fabricated gelatin-immobilized polyurethane foams (PUFG) by dipping polyurethane foam (PUF) in an aqueous solution containing gelatin and by subsequent reaction with glutaraldehyde after freeze-drying. Gelatin aqueous solutions of different concentrations were used as the dipping solutions to control the amount of immobilized gelatin. The average pore size of PUF decreased with an increase in gelatin concentration. It was found from the hepatocyte adhesion experiment that the amount of hepatocytes seeded on PUFG1, prepared by using a 1% aqueous gelatin solution, was higher than that on other PUFGs. The hepatocytes inoculated in PUFG1, were slightly aggregated as the incubation time increased. The cells inoculated in PUFG1 showed higher ammonia removal ability than those monolayer-cultured on a gelatin-immobilized polystyrene dish (PSG) after 1 and 4 days of incubation time. The inoculated cells exhibited higher albumin secretion relative to monolayer-cultured hepatocytes on PSG. Albumin secretion by hepatocytes seeded on PUFG1 was increased by the presence of serum and was further increased by both the presence of serum and cytokines. The results obtained from a 3-(3,4-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay indicated that PUFG can provide a better microenvironment for hepatocyte culture along with nutrition and metabolite transfer through the high porosity of PUF.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.17-18
• /
• 2006

고상 확산 방법을 이용하여 얕은 소스/드레인 접합을 가지는 SOI (Silicon-On-Insulator) MOSFET 소자를 제작하였다. 확산원으로는 PSG(Phosphorus silicate glass) 박막과 PBF(Poly Boron Film) 박막이 각각 n, p-type 소자 형성을 위해 사용되었다. 얕은 접합 형성을 위하여 급속 열처리 방법(RTA: Rapid Thermal Annealing)을 이용하여 PSG와 PBF로부터 인과 붕소를 SOI MOSFET 소자의 소스/드레인으로 확산시켰다. 또한, 소자 특성 개선을 위한 후 속 열처리 공정으로 희석된 수소 분위기 중에서 FA(Furnace Annealing)를 실시하였다. SPD 기술을 적용하여 10 nm 이하의 매우 얕은 p-n 접합을 형성할 수 있었고, 양호한 다이오드 특성을 얻을 수 있었다. 또한, SPD 방법으로 결함이 없는 접합 형성이 가능하며, 소자 제작 공정의 최적화를 통해 차세대 CMOS 소자로 기대되는 SOI MOSFET를 성공적으로 제작할 수 있었다.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.181-190
• /
• 2014

This paper reports a cognitive radio network architecture based on overloaded multicarrier direct sequence code division multiple access (O-MC-DS-CDMA). The O-MC-DSCDMA technique combines CDMA with a multicarrier modulation technique to overcome the channel fading effects. In this technique, secondary users are enabled to share the available bandwidth with the existing primary users. Two sets of orthogonal Gold codes are used to support the primary and secondary users simultaneously. The orthogonality between the spreading codes is lost due to the non-zero cross correlation between the codes and the timing synchronization error in the uplink transmission, which causes interference between primary and secondary users. This paper proposes two modified hybrid parallel/successive interference cancellation techniques for primary and secondary user base station receivers with multiple antennas to suppress the interference among users. Interference among the same group of users is cancelled by parallel interference cancellation and the interference among groups is cancelled using successive interference cancellation. The simulation results confirmed that the proposed modified interference cancellation techniques show better BER performance over conventional interference cancellation techniques.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.171-174
• /
• 2000

We have investigated the CMP slurry properties of silicate oxide thin films surface on CMP cleaning process. The metallic contaminations by CMP slurry were evaluated in four different oxide films, such as plasma enhanced tetra-ethyl-ortho-silicate glass(PE-TEOS), $O_3$ boro-phospho silicate giass( $O_3$-BPSG), PE-BPSG, and phospho-silicate glass(PSG). All films were polished with KOH-based slurry prior to entering the post-CMP cleaner. The Total X-Ray Fluorescence(TXRF) measurements showed that all oxide surfaces are heavily contaminated by potassium and calcium during polishing, which is due to a CMP slurry. The polished $O_3$-BPSG films presented higher potassium and calcium contaminations compared to PE-TEOS because of a mobile ions gettering ability of phosphorus. For PSG oxides, the slurry induced mobile ion contamination increased with an increase of phosphorus contents.

• Sleep Medicine and Psychophysiology
• /
• v.3 no.1
• /
• pp.31-37
• /
• 1996

Uvulopalatopharyngoplasty(UPPP) is an operation that is frequently performed for the patient of obstructive sleep apnea(OSA). A major problem has been to select those patients who will have a good response to UPPP. We compared preoperative and postoperative polysomnography(PSG) in 20 patients to evaluate the success rate of the operation. Each subject underwent a cephalometric roentgenogram, and fiberoptic nasopharyngoscopy with Mueller maneuver was applied in roentgenogram and fiberoptic nasopharyngoscopy with Mueller maneuver was applied in preop evaluation of patients with OSA. No PSG parameter could accurately predict the changes in sleep after UPPP. There were no significant differences between the responders and the nonresponders concerning the cephalometric analysis, the type of obstruction by Mueller maneuver, and body mass index(BMI). The conclusions of this study are thus that UPPP is an effective treatment for the OSAS with a high success rate, but that there is no single useful parameter predicting the success of the operation.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.1 no.3
• /
• pp.42-50
• /
• 2013

Brand Equity plays a major role in the highly competitive Quick Service Restaurants (QSR) industry in India. There are a variety of factors which affect the brand equity that a company commands in the market. Integrated Marketing Communication (IMC) is an emerging concept in marketing wherein all the major promotional activities are used to create a synergic output and send across a clear and consistent message to the customers. This study aims to find out the impact of five major tools of IMC namely Advertising, Word of Mouth, Sales Promotion, Event Sponsorships and Public Relations which are most applicable in the QSR industry on the four major dimensions namely Brand Awareness, Brand Association, Perceived Quality and Brand Loyalty which aid in creating Brand Equity. The study was conducted by collecting data from a sample and analyzing the data using statistical tools to find any relationships between the above mentioned variables. The findings suggest that marketers should focus on building favorable opinion about the brand amongst customers and take care regarding the news published about the brand since it affects brand image. Moreover, it was also found out that making people aware about the brand and the perceived quality about the brand play the major role in creating brand equity more than other factors.