• Clean Technology
• /
• v.7 no.2
• /
• pp.127-132
• /
• 2001

The effects of activated-carbon (AC) packing length on the Pressure Swing Adsorption (PSA) performance was investigated for the hydrogen separation from the multicomponent mixture gas. Linear driving force model was used to describe mass transfer between two phase and coupled Langmuir isotherm was used for each component as a nonlinear adsorption isotherm. When two adsorbents with a different adsorption capacity were packed consecutively in one bed, it is very important to determine the packing ratio of zeolite to activated carbon affecting the purity and recovery of the product. The activated carbon packing length in adsorption tower of 120 cm was determinated by the ending point of $CO_2$ contration. The optimum length of an activated carbon layer was 65 cm for production of high-purity hydrogen.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.727-735
• /
• 2014

For improved sustainability of the biorefinery industry, biorefinery-byproduct glycerol is being investigated as an alternate source for hydrogen production. This research designs and optimizes a hydrogen-production process for small hydrogen stations using steam reforming of purified glycerol as the main reaction, replacing existing processes relying on steam methane reforming. Modeling, simulation and optimization using a commercial process simulator are performed for the proposed hydrogen production process from glycerol. The mixture of glycerol and steam are used for making syngas in the reforming process. Then hydrogen are produced from carbon monoxide and steam through the water-gas shift reaction. Finally, hydrogen is separated from carbon dioxide using PSA. This study shows higher yield than former U.S. DOE and Linde studies. Economic evaluations are performed for optimal planning of constructing domestic hydrogen energy infrastructure based on the proposed glycerol-based hydrogen station.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.38-41
• /
• 1994

막분리(membrane separation)법은 막 전후의 압력차, 농도차 등을 추진력(driving foroe)으로 하여 분리대상물질에 대한 막의 선택투과성 차이를 이용, 분리를 행하는 것이다. 이 분리법은 기존의 분리공정인 심냉법(cryogenic separation)과는 달리 상변환 공정이 필요없어 에너지가 적게 들고 또한 PSA(pressure swing adsorption)법에서와 같은 cycle 운전이 필요없어 연속적으로 분리가 가능하며 시스템도 간단하다. 최근 기체 막분리의 경우 수소 및 탄산가스의 회수정제, 공기중의 산소와 질소의 분리 등에 실용화되고 있다. 여기서는 공기중의 산소를 분리하여 30-40% 산소부화공기(oxygen enriched air)를 간편하게 제조할 수 있는 산소부화막장치와 연소장치에의 응용기술 및 연구결과에 대해 간략히 소개하고자 한다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.4
• /
• pp.352-360
• /
• 2017

Polygeneration process is widely used to pursuit high efficiency by sharing electricity, utility, refrigeration and the utilization of product chemicals. In this paper, performance analysis of the 450 MW Class polygeneration process was conducted with various syngas generated from coal and biomass gasifier. WGSR and PSA process were employed for hydrogen production and separation. Process modeling and dynamic simulation was carried out, and the results were compared with NETL report. Net power of the polygeneration process was 439 MW considering power consumption. More than 90% of CO was converted at WGSR and the hydrogen purity of PSA was more than 99.99%.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.357-362
• /
• 2014

To prepare diketopyrrolopyrrole (DPP) red 254 pigment with high shield and bright color, DPP red 254 crude previously synthesized was treated at various thermal-treat temperature, addition derivative and ball-milling. The properties of samples were measured by the means of FT-IR, UV-Vis spectroscopy, TEM, PSA, BET surface area analyzer, viscometer and spectrophotometer. It was found that solvent thermal-treatment of the sample prepared after ball-milling as nano-scale was very effective method in pigmentation process.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.75-81
• /
• 2017

The design trend of information technology is quickly changed with the times. The design trend of information display is a bezel-less display, recently. The bezel-less display or edge-less display is a new trend of mobile phone display. In this study, the shading tape was manufactured for assembling process of touch panel display with the high screen-to-body ratio so-called bezel-less display. The shading tape was fabricated on PET film with the UV curable acrylic pressure sensitive adhesive(PSA) by roll-to-roll process. The UV curable PSA was synthesized with the eco-friendly toluene-less manufacturing method. The adhesive power of manufactured shading tape was investigated by motorized tensile testing machine. The thixotropic, maintaining property of cutting shape, was characterized by field emission scanning electron microscope. As results, the shading tape exhibits high adhesive power and good thixotropic performance suitable for assembly process of touch panel display. The functional shading tape will be expected to improve productivity of assembly process of touch panel display.

• Journal of Convergence for Information Technology
• /
• v.9 no.2
• /
• pp.34-42
• /
• 2019

In this study, we analyzed the effects of the automatic control system on the reactor operation. The Propyrene Reactor process is complex and typically is inefficient and costly due to the lack of productivity. In this study, a research model was presented with the aim of supplementing obstacles to enhance operational efficiency and increase productivity. The configuration of the existing processes was analyzed to complement the hardware and software systems with original models. The composition of the facility is applied to eight reactor units producing 600,000 ton/year propylene per year. As a result of applying the research model, efficiency of operation was increased, and production volume increased from 90 to 95%, along with 91% Reliability. Future studies will present a research model to improve productivity by 100 percent. In addition, we will study the stability and productivity improvement of PSA (Pressure Swing Adsorption) systems, which are the hydrogen production process of propylene by-products.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.61-67
• /
• 2022

A metal salt solution was prepared from valuable metals (Ni, Co, Mn) recovered from a scrap of waste lithium secondary batteries, and an NCM811 precursor was synthesized from the solution. The effect on precursor formation according to reaction time was confirmed by SEM, PSA, and ICP analysis. Based on the analysis results, the electrochemical properties of the synthesized NCM811 precursor and the commercial NCM811 precursor were investigated. The Galvano charge-discharge cycle, rate performance, and Cycle performance were compared, and as a result, there was no significant difference from commercial precursors.

• Clean Technology
• /
• v.7 no.1
• /
• pp.51-63
• /
• 2001

In this study, PSA, known as the most economic process, was used to recover $CO_2$ from the power-plant flue gas. Activated carbon and zeolite molecular sieve 13X were used as adsorbent. Activated carbon has been deemed inadequated adsorbent for separating $CO_2$ from the flue gas. However, highly concentrated $CO_2$ could be obtained as a product on the activated carbon adsorbent using the new operating cycle modifying the rinse step. Also, the recovery of $CO_2$ was improved using double-layered adsorption column packed with the activated carbon and the zeolite 13X simultaneously. Adsorption column was filled with the activated carbon in the feed-end side, and the zeolite 13X in the product-end side. The recovery of $CO_2$ increased about 40% with only 25% zeolite, and increased 67% with 50% zeolite at the experimental conditions of 13% $CO_2$ concentration, 10 SLPM flow rate and 2.2 atm adsorption pressure.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.55-57
• /
• 1996

다공성 무기막은 높은투과도와 뛰어난 내열.내화학성, 그리고 경제성 때문에 기존의 PSA공정이나 증류와 같은 고에너지 분리공정을 대체하는 공정으로 각광을 받고 있다. 무기재료막의 제조하는 방법으로 주로 알콕사이드를 사용하는 솔-젤법(1)과 금속(2) 또는 기상반응(3)을 이용하는 화학증착법이 사용된다. 또한 고온에서 수소를 연속적으로 분리하여 화학평형에 기인한 한계를 극복하여 높은 수율을 얻고자하는 막반응기에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 $\alpha$-알루미나 지지체의 미세한 다공성 구조 내부에서 TEOS(Tetraethylorthosilicate)와 산성의 알코올-물 혼합물을 확산시켜 실리카 솔을 생성시킴과 동시에 젤화시켜 기공의 크기를 감소시켜 막을 제조하였다. 이렇게 제조된 막은 높은 투과도와 낮은 수소선택도(selectivity=3-4)를 보였고, 두번째 단계로 silica sol을 제조하여 진공 하에서 dip-coating을 행하였다. 이렇게 2단계로 기공 구조를 개선시킨 실리카 막은 저압에서 상대적으로 높은 수소의 분리도(selectivity=5-7)를 보였으며 여전히 높은 투과도를 갖는다.