• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.47-52
• /
• 1981

The purpose of this study is to determine the antibacterial effect of Dilute Formocresol and Eugenol and Propylene glycol. The experimental drugs are Formocresol in Propylene glycol (5, 10, 20%) and Eugenol in Propylene glycol (50, 75, 100%) and Propylene glycol. The organisms selected for study were Staphylococcus aureus, Pseudomonas aeruginosa, and Bacillus subtilis which are found in infected root canals and are highly resistant to antiseptics. Isolated bacteria were inoculated on blood agar plate and the plates were incubated at $37^{\circ}C$ for 18 hours and the zones of inhibition then measured. The results were as follows ; 1. The antibacterial action of Formocresol was effective even at 5-10 percent and the action increased when higher concentration was used. 2. The antibacterial action of Eugenol was not effective and the action decreased when higher concentration was used. 3. Propylene glycol itself possessed some antibacterial properties and showed that the antibacterial action of Propylene glycol might be almost the same as that of Eugenol. 4. Among the experimental organisms, Pseudomonas aeruginosa was found to be the most resistant to all the experimental drugs.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.2
• /
• pp.107-110
• /
• 2005

To develop a clotrimazole-loaded solid suppository with poloxamer and propylene glycol, the melting points of various formulations composed of poloxamer 188 (P 188) and propylene glycol were investigated. The dissolution study of clotrimazole delivered by the suppository composed of P 188 and propylene glycol was performed. The mixtures composed of P 188 and propylene glycol were homogeneous. Propylene glycol affected the melting points of poloxamer mixtures. In particular, the mixture [P 188/propylene glycol (70/30%)] with the melting point of about $32^{\circ}C$ was a solid form at room temperature and instantly melted at physiological temperature. Furthermore, propylene glycol affected greatly the dissolution rates of clotrimazole from the suppository. Dissolution mechanism analysis showed the dissolution of clotrimazole was proportional to the time. Our results indicated that the solid suppository with P 188 and propylene glycol would be a candidate of rectal dosage form for clotrimazole.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.281-287
• /
• 1994

The effects of oleic acid, propylene glycol and 5% (w/w) oleic acid in propylene glycol on the electrical properties of hairless mouse skin were studied and the results were compared. The complex electrical impedance was measured as a function of frequency, and resistance and capacitance were determined from the Nyquist plot. Immediately after the treatment with oleic acid, resistance was 145% of the pretreatment value. However it decreased with time and, after 20 hours, it was about 25% of its pretreatment value. Capacitance increased; immediately after the treatment, it was about 125% of pretreatment value and it seemed to increase slowly with time. When the skin was treated with propylene glycol, resistance decreased about 5O% and capacitance increased about 65%. Similar results were observed when the skin was treated with 5% (w/w) oleic acid in propylene glycol, except that the magnitude of resistance drop was much larger. Oleic acid acted synergistically with propylene glycol. Together with the flux data in the literature, the results obtained in this work indicate that electrical resistance is closely related to the permeability of drug molecules through the skin. The results are discussed in terms of the mechanism of action of these penetration enhancers. Overall, this work provided further mechanistic insight into the role of SC lipids in skin resistance and capacitance.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.463-467
• /
• 2015

We investigated catalytic activity of ion-exchange resins in acetalization of 1,2-propylene glycol with acetaldehyde. The impacts of reaction variables, such as temperature, reaction time, catalyst loading and feedstock composition, on the conversion of 1,2-propylene glycol were measured. The life of the catalyst was also studied. Furthermore, the reaction kinetics of 1,2-propylene glycol acetalization was studied. It was found that reaction rate followed the first-order kinetics to acetaldehyde and 1,2-propylene glycol, respectively. Therefore, overall acetalization reaction should follow the second-order reaction kinetics, expressed as. Key words: 1,2-propylene Glycol, 2,4-dimethyl-1,3-dioxolane, Ion-exchange Resin, Polyhydroxy Compounds, Acetalization $r=kC^{nA}_AC^{nB}_B=19.74e^{\frac{-6650}{T}}C^1_AC^1_B$.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.105-109
• /
• 2010

HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate) and propylene glycol was copolymerized in the presence of AIBN (azobisisobutyronitrile) initiator in a mould. The physical properties of the contact lens were measured. The water content of 37.06~38.71%, refractive index of 1.492~1.432, visible transmittance of 89.4~91.5%, tensile strength of 0.1416~0.2302 kgf, and contact angle of $38.60{\sim}53.53^{\circ}$ were obtained. Therefore, the contact lens material produced using propylene glycol as an additive satisfied the basic physical properties required for contact lenses application. It is interesting to note that an increase in wettability and tensile strength while having no significant changes in water content.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.4
• /
• pp.203-208
• /
• 1988

The stability and solubility of piroxicam in propylene glycol (PG), polyethylene glycol (PEC), and PG-water cosolvents have been studied by using high performance liquid chromatography. The degradation rate followed an apparent first-order kinetic and the reaction rate constants at 70, 80, and $90^{circ}C$ were determined. From these rate constants, the activation energy and the rate constant of piroxicam at $25^{circ}C$ in pure PG calculated by Arrhenius equation were 23.34 kcal/mole and $7.0\;{\times}\;10^{-4}\;day^{-1}$, respectively. Both of PG and PEG increased the solubility of the drug, but PEG was more effective.

• Clean Technology
• /
• v.20 no.1
• /
• pp.7-12
• /
• 2014

Hydrogenolysis of glycerol to propylene glycol was performed over binary and ternary metal oxide catalysts. The conversion of glycerol and selectivity to propylene glycol were increased on Cu/Zn and Cu/Cr mixed oxides compared to pure CuO and ZnO oxides. The addition of alumina into Cu/Zn mixed oxide very highly increased the conversion of glycerol and selectivity to propylene glycol. The conversion of glycerol was increased with increasing the reaction temperature but the selectivity to propylene glycol was shown to have maximum value at $200^{\circ}C$ and then decreased at $250^{\circ}C$. The conversion of glycerol and selectivity to propylene glycol were decreased with increasing the glycerol concentration.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.889-892
• /
• 2005

Standardized method based on extraction, filtration, and gas chromatography (GC) was developed far propylene glycol analysis to set hygienic norm of safety measure for foods under governmental control. Various columns were tested fur propylene glycol analysis by GC with flame ionization detector. Known amount of propylene glycol was spiked into wheat flour dough and analyzed by developed method. Results showed 101.60% recovery rate for propylene glycol with HP-5 column. Reproducibility test of standards recorded 0.30 for standard variation and 0,42% for relative variation. Using analytical method established, contents of propylene glycol in more than hundred different foods were monitored. Propylene glycol was detected in most foods, indicating propylene glycol is not only commonly added during food preparation, but also is contained naturally in food.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.27-30
• /
• 1989

The fast separation and determination of cefatrizine${\cdot}$propylene glycol and inmpurities - TACA: 7-amino-3-(1,2,3-triazol-4-yl)thiomethyl-3-cephem-4-carboxylic acid and 7-ACA; 7-amino cephalosporanic acid - was performed by the high poerformance liquid chromatography using octadecyl siland (ODS) column. Methanol and ammonium phosphate buffer [$0.03M(NH_4)_2\;HPO_4$, (pH 7.5)] was used analyze, as eluent. The experimental value of the contents of cefatrizine${\cdot}$propylene glycol and impurities agree with the theoretical value of those.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.5
• /
• pp.289-293
• /
• 2008

To develop a poloxamer-based solid suppository with poloxamer and polyethylene glycol mixtures, the melting point of various formulations composed of P 188 and propylene glycol were investigated. The dissolution and antitumor activity of clotrimazole delivered by the poloxamer-based suppository were performed. The poloxamer mixtures composed of P 188 and propylene glycol were homogeneous phases. P 188 greatly affected the melting point of poloxamer mixtures. In particular, the poloxamer mixture [P 188/propylene glycol(70/30%)] with the melting point of about $32^{\circ}C$ was a solid form at room temperature and instantly melted at physiological temperature. Furthermore, the ratio of P 188/propylene glycol greatly affected the dissolution rates of clotrimazole from poloxamer-based suppository. It gave the more effective anti-tumor activity than conventional PEG-based suppository due to fast dissolution. Thus, the clotrimazole-Ioaded poloxamer-based solid suppository was an effective rectal dosage form with anti-tumor activity.