• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.303-310
• /
• 2017

Pressure retarded osmosis(PRO) has attracted much attention as potential technology to reduce the overall energy consumption for reverse osmosis(RO) desalination. The RO/PRO hybrid process is considered as the most logical next step for future desalination. The PRO process aims to harness the osmotic energy difference of two aqueous solutions separated by a semipermeable membrane. By using the concentrated water(RO brine) discharged from existing RO plants, the PRO process can effectively exploit a greater salinity gradient to reduce the energy cost of processing concentrated water. However, in order to use RO brine as the draw solution, PRO membrane must have high water flux and enough mechanical strength to withstand the high operational pressure. This study investigates the development of a thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on the overall power density was studied using the characteristic factors of PRO membranes. Finally, the performance test of an 8-inch spiral wound module was carried out under various operating conditions(i.e. hydraulic pressure, flow rate, temperature). As the flow rate and temperature increased under the same hydraulic pressure, the PRO performance increased due to the growth of water permeability coefficient and osmotic pressure. For a high performance PRO system, in order to optimize the operating conditions, it is highly recommended that the flow pressure be minimized while the flow rate is maintained at a high level.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.179-185
• /
• 2012

This paper proposes a design of RSIDS(RST and SVM based Intrusion Detection System) using RST(Rough Set Theory) and SVM(Support Vector Machine) algorithm. The RSIDS consists of PrePro(PreProcessing) module, RRG(RST based Rule Generation) module, and SAD(SVM based Attack Detection) module. The PrePro module changes the collected information to the data format of RSIDS. The RRG module analyzes attack data, generates the rules of attacks, extracts attack information from the massive data by using these rules, and transfers the extracted attack information to the SAD module. The SAD module detects the attacks by using it, which the SAD module notifies to a manager. Therefore, compared to the existing SVM, the RSIDS improved average ADR(Attack Detection Ratio) from 77.71% to 85.28%, and reduced average FPR(False Positive ratio) from 13.25% to 9.87%. Thus, the RSIDS is estimated to have been improved, compared to the existing SVM.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.664-671
• /
• 2010

In this paper, we developed a Zigbee module based on CC2520 which is possible to construct the mesh network and also support to Zigbee Pro standard as a preceding research of autonomous moving of mobile robot using Zigbee. After manufacturing the Zigbee module, we selected antenna to fit Zigbee wireless frequency band using network analyze as means performance improvement. We also carry out an impedance matching of Zigbee module, extend the possible distance of two-way wireless communication and ensure the safety of communication.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.181.2-181.2
• /
• 2010

탄소함유 에너지원의 고갈과 가격상승, 이들 에너지 사용에 수반되는 지구 온난화 문제들로 세계는 새로운 에너지원을 도입하고자 노력하고 있다. 그 중 풍력에너지는 자원이 풍부하고 끊임없이 재생되며 광범위한 지역에 분포되어 있고, 운전 중에 온실가스의 배출이 없다는 점에서 가장 경제성이 있고 유용한 에너지원으로 인식되고 있다. 풍력발전기는 선진 국가에서부터 꾸준히 성장해 왔으며, 그 성능을 개선시키기 위하여 많은 연구가 진행되고 있다. 풍력발전기를 설치하여 발전단지를 조성함에 있어서 발전량을 예측하기 위해서 발전기가 세워질 모든 지점에 허브높이의 실측타워를 세워 풍황데이터를 측정하여야 하지만 이런 방법은 재정적인 부담이 매우 크다. 따라서 본 논문에서는 서산기상대에서 측정된 기상데이터를 이용하여 태안해안국립공원내 만리포해수욕장 지역의 풍황 및 발전량을 예측하였다. 이 때 풍황 및 발전량 예측은 풍력단지 설계를 목적으로 사용되고 있는 WindPRO Basic과 WAsP-Interface 모듈을 이용하였다. 이렇게 예측된 풍황을 이용하여 발전단지를 조성하고, PARK 모듈을 사용하여 발전단지의 에너지를 계산하였으며, WindBANK 모듈을 이용하여 단지의 경제성을 평가하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.5
• /
• pp.553-559
• /
• 2016

There has been increasing global interest in the environmental pollution problems produced by fossil fuel consumption and greenhouse gas emissions. In order to tackle these issues, new renewable energy such as solar, wind, bio gas, fuel cell and pressure retarded osmosis(PRO) have been developed extensively. Among these energy sources, PRO is one of the salinity gradient power generation methods. In PRO, energy is obtained by the osmotic pressure generated from the concentration difference between high and low concentration solutions separated by a semipermeable membrane. The development for high power density PRO membranes is imperative with the purpose of commercialization. This study investigates development of thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on power density was identified, and the characteristic factors of PRO membranes was determined. Different backing layers were used to improve power density. As expected, the PRO membrane with more porous backing layer showed higher power density.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.51-56
• /
• 1994

본 논문에서는 조선 블록분할 공정계획의 CAD화를 위한 요구기능의 정의와 이의 구현을 위하여 기존의 Steerbear와 같은 와이어프래임 모델링(Wire Frame Modeling) CAD 시스템에서는 처 리할 수 없는 기능을 범용 솔리드 모델러 상에서 필요한 소프트웨어 모듈을 개발하여 기능 검 증을 하였다. 기능 검증의 도구(tool)로서 CAD 데이터베이스의 접근이 가능한 Pro/ENGINEER를 이용하였으며 CAD 데이터베이스의 접근 도구는 Pro/DEVELOPE을 사용하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.3
• /
• pp.271-278
• /
• 2016

Recently, reverse osmosis (RO) is the most common process for seawater desalination. A common problem in both RO and thermal processes is the high energy requirements for seawater desalination. The one energy saving method when utilizing the osmotic power is utilizing pressure retarded osmosis (PRO) process. The PRO process can be used to operate hydro turbines for electrical power production or can be used directly to supplement the energy required for RO desalination system. This study was carried out to evaluate the performance of both single-stage PRO process and two-stage PRO process using RO concentrate for a draw solution and RO permeate for a feed solution. The major results, were found that increase of the draw and feed solution flowrate lead to increase of the production of power density and water permeate. Also, comparison between CDCF and CDDF configuration showed that the CDDF was better than CDCF for stable operation of PRO process. In addition, power density of two-stage PRO was lower than the one of single-stage. However, net power of two-stage PRO was higher than the one of single-stage PRO.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.18-25
• /
• 2006

In order to perform system requirements quickly and accurately, an automatic design program of solid rocket motors(SRM) structure designated as the 'ProDes software' has been developed and verified. from given system design criteria and constraints, it has the capabilities to design, analysis, simulation and drawing process to greatly reduce the over 'design cycle time' and manpower of a project. The conception of the program is modular, and calculations are performed step by step allowing parametric design studies and providing final selected design goal. Each configurations of SRM components and joint types composed of various master models is obtained from the data base module of the library. Between the design results of the ProDes software and those of the previous detail design of the established motor showed good agreements.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.3-11
• /
• 2009

Open source is recently much more made and distributed by on-line such as internet in various fields. Therefore, end users could rapidly develop applications needed for some purposes using minimal efforts if use open sources. But, open source must be customized for their purposes. In this paper, we developed software for coordinates conversion and compared the software with NGI Pro which is developed by National Geographic Information Institute. Consequently, it is possible for us to easily develop the coordinates conversion module and we know that the use of open source is effective to develop various applications.

• KIPE Magazine
• /
• v.13 no.4
• /
• pp.28-32
• /
• 2008

Power Supply Designer는 부품설계, large-sign -al 시뮬레이션, feedback control design 그리고 소신호 해석 등 완전한 스위칭 전원공급장치(SMPS)의 설계를 위한 시뮬레이션 프로그램입니다. 또한 최종 정확도 모델링 기술을 사용한 전류-모드 시뮬레이션, CCM & DCM 컨버터 시뮬레이션, loop gain이 포함된 컨트롤 시스템의 해석, 필터 디자인 및 해석, 모든 주요 부품에 대한 파워손실 측정 및 스트레스 해석을 하기 위한 빠르고 순환적인 시뮬레이션과 시뮬레이션시 자주 발생하는 Convergence 에러를 최소화할 수 있는 Convergence 마법사 기능을 수행할 수 있습니다. Power Supply Designer는 ICAP/4 Power Delu -xe라는 시뮬레이터와 인덕터 및 트랜스포머를 설계할 수 있는 Magenetics Designer가 패키지로 구성이 되어 있는 제품입니다. Solar Pro는 일사량, 온도, 각 지역의 위치정보에 대한 데이터와 태양광모듈에 대한 데이터를 고려하여 그림자 분석, I-V계산, 발전량계산, 경제성분석을 제공하는 솔루션입니다. 또한 그림자의 궤적과 발전량을 계산하여 애니메이션으로 볼 수가 있고 경제성을 포함한 시스템 성능을 표시할 수 있기 때문에 태양광 설치 고객에게 태양광 발전 시스템 자체에 대한 이해와 설득력 있는 프리젠테이션을 할 수가 있습니다.