• 제목/요약/키워드: PR condition

검색결과 149건 처리시간 0.025초

Dissipation of energy in steel frames with PR connections

  • Reyes-Salazar, Alfredo;Haldar, Achintya
    • Structural Engineering and Mechanics
    • /
    • 제9권3호
    • /
    • pp.241-256
    • /
    • 2000
  • The major sources of energy dissipation in steel frames with partially restrained (PR) connections are evaluated. Available experimental results are used to verify the mathematical model used in this study. The verified model is then used to quantify the energy dissipation in PR connections due to hysteretic behavior, due to viscous damping and at plastic hinges if they are formed. Observations are made for two load conditions: a sinusoidal load applied at the top of the frame, and a sinusoidal ground acceleration applied at the base of the frame representing a seismic loading condition. This analytical study confirms the general behavior, observed during experimental investigations, that PR connections reduce the overall stiffness of frames, but add a major source of energy dissipation. As the connections become stiffer, the contribution of PR connections in dissipating energy becomes less significant. A connection with a T ratio (representing its stiffness) of at least 0.9 should not be considered as fully restrained as is commonly assumed, since the energy dissipation characteristics are different. The flexibility of PR connections alters the fundamental frequency of the frame. Depending on the situation, it may bring the frame closer to or further from the resonance condition. If the frame approaches the resonance condition, the effect of damping is expected to be very important. However, if the frame moves away from the resonance condition, the energy dissipation at the PR connections is expected to be significant with an increase in the deformation of the frame, particularly for low damping values. For low damping values, the dissipation of energy at plastic hinges is comparable to that due to viscous damping, and increases as the frame approaches failure. For the range of parameters considered in this study, the energy dissipations at the PR connections and at the plastic hinges are of the same order of magnitude. The study quantitatively confirms the general observations made in experimental investigations for steel frames with PR connections; however, proper consideration of the stiffness of PR connections and other dynamic properties is essential in predicting the dynamic behavior.

산화조건에서 $PrCl_3$의 열적거동 (Thermal behavior of $PrCl_3$ in an oxidizing condition)

  • 은희철;양희철;조용준;이한수;김인태
    • 방사성폐기물학회지
    • /
    • 제7권4호
    • /
    • pp.207-212
    • /
    • 2009
  • 본 연구에서는 산화조건하 LiCl-KCl 공융염내에서 란탄계 염화물의 하나인 $PrCl_3$의 열적거동을 살펴보았다. 먼저 산소를 주입하면서 $PrCl_3$의 열중량분석(TGA; thermogravimetric analysis)을 실시하였고, 이 때 얻어진 결과들을 바탕으로, 산소분산법을 이용하여 온도에 따른 LiCl-KCl 공융염내 $PrCl_3$의 산화실험을 수행하였다. $PrCl_3$의 열중량분석 결과에 따르면, 약 $380^{\circ}C$까지 $PrCl_3$에서 염소의 해 리가 급격하게 발생되었고 약 $600^{\circ}C$에서 $PrCl_3$가 PrOCl로 전환되는 반응이 종료되는 것으로 확인되었다. 산소분산법에 의한 LiCl-KCl 공융염내 $PrCl_3$의 열적거동은 산화조건에서 열중량분석시 나타난 $PrCl_3$의 열적거동과 유사하였고, 발생된 PrOCl은 공융염내에서 불용성 화합물로써 바닥으로 침전하였다. 산소분산법에 의한 공융염내 $PrCl_3$의 PrOCl로의 전환은 $650^{\circ}C$ 이상의 온도에서 활발하게 진행되었고, 이 때 발생되는 배기가스내 $Cl_2$의 농도분석을 통해 공융염내 $PrCl_3$의 전환상태를 예측할 수 있을 것으로 판단된다.

  • PDF

Al-Cu 금속 배선 부식 개선을 위한 공정조건 최적화에 관한 연구 (A Study on the Process Conditions Optimization for Al-Cu Metal Line Corrosion Improvement)

  • 문성열;강성준;정양희
    • 한국정보통신학회논문지
    • /
    • 제16권11호
    • /
    • pp.2525-2531
    • /
    • 2012
  • 반도체에 사용되는 금속 배선으로써 Al-Cu 합금은 낮은 저항과 제조 공정의 용이성으로 인해 CMOS제조 공정에 있어 수년간 사용되어 왔다. 그러나 금속은 근본적으로 부식에 취약하기 때문에 금속 배선 제조 공정에 있어 부식은 오랜 숙제로 남아 있다. 부식은 칩의 신뢰성 문제를 유발하기 때문에 이를 제어할 보다 효과적인 방법이 요구 되고 있다. 부식을 유발하는 다양한 항목 중에 금속 배선 식각 후 PR 스트립과 후속 세정 조건은 조절 가능한 파라미터이며, 또한 부식을 방지할 수 있는 마진을 향상할 수 있는 요소이다. 본 연구는 부식을 방지하기 위해 PR 스트립 공정 조건 및 후속 세정 조건을 최적화함으로써 금속 배선 식각 후 염소 잔유물과 플라즈마 charge up을 제거해야 함을 제안 하였다.

Effects of Water Deficit on Leaf Growth during Vegetative Growth Period in Soybean

  • Kim, Wook-Han;Hong, Byung-Hee
    • 한국작물학회지
    • /
    • 제45권1호
    • /
    • pp.1-5
    • /
    • 2000
  • Leaf area is critical for crop light interception, and thereby has a substantial influence on crop yield. This experiment was conducted to characterize the development of soybean [Glycine max (L.) Merr.] leaf area. Plastochron index and leaf relative growth rate of Jackson was contrasted with the PI416937, which also has demonstrated tolerance to drought. First, plastochron ratio (PR) and plastochron index (PI) were evaluated in greenhouse to compare the leaf growth rate between two genotypes under well-watered condition. There was reasonable constancy of PR between two genotypes. The PR means of Jackson and PI416937 were 0.41 and 0.44, respectively. A fairly smooth increase of PI during vegetative stage was observed. Second, the relative growth rates were graphed against leaf area, normalized with respect to final leaf area, under well-watered and water-deficit conditions. Leaf growth was sustained longer in well-watered condition than water-deficit condition and there was a sizable proportion of leaves which was ceased earlier their growth in water-deficit condition compared to well-watered condition. The leaf relative growth rate of Jackson until leaves had completed at 45% of their growth during water deficit period was higher than that of PI416937.

  • PDF

Metal 건식각 후처리에 따른 부식 특성에 관한 연구 (A Study on the corrosion property by post treatment in the metal dry etch)

  • 문성열;강성준;정양희
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 추계종합학술대회
    • /
    • pp.747-750
    • /
    • 2007
  • 본 연구는 부식을 방지하기 위해서는 metal line식각 후 염소 잔유물 과 plasma charge up을 식각 조건, PR strip조건 및 후속 세정 조건을 최적화함으로써 제거해야 한다고 제안 하였다. Metal line에 다량 분포하는 charge up은 후속 세정의 적정 PH와 만났을 때, 하부 tungsten plug의 부식을 유발 하게 된다. Metal line식각 및 PR strip후 세정에 있어 약액의 종류는 부식에 결정적인 영향을 미친다. Galvanic corrosion을 최소화하기 위한 적정 PH, metal attack을 최소화 할 수 있는 chemistry선택, 높은 식각 부산물 제거 효율의 약액, 최적의 $H_2O$처리 조건 등이 metal부식방지에 있어 결정적인 요소임을 확인하였다.

  • PDF

넓은 수평 환형 공간에서의 중간 Prandtl수 유체의 자연 대류의 천이 (Free Convective Transition of Intermediate Prandtl-Number Fluids in a Wide-Gap Horizontal Annulus)

  • 유주식
    • 대한기계학회논문집B
    • /
    • 제24권2호
    • /
    • pp.169-176
    • /
    • 2000
  • Natural convection in a wide-gap horizontal annulus is considered, and the transition of flows and the bifurcation phenomenon are investigated for the fluids with Pr=0.2 and 0.3. At Pr=0.2, a bicellular flow pattern is observed at high Rayleigh number, and the solution is unique. At Pr=0.3, both the steady unicellular and bicellular flows exist above a certain critical Rayleigh number. For the fluids of Pr=0.2, the bicellular flow can be obtained by the impulsive heating of the inner cylinder, but it is not obtained from the zero initial condition for Pr=0.3. Hysteresis phenomena have not been observed. A transition from a bicellular flow to a unicellular flow occurs for Pr=0.3.

The Influence of Firing Conditions on the Color Properties of Pr-ZrSiO4 Pigments Synthesized Using Rice Husk Ash

  • Pyon, Kyu-Ri;Lee, Byung-Ha
    • 한국세라믹학회지
    • /
    • 제46권4호
    • /
    • pp.397-404
    • /
    • 2009
  • Using rice husk ash as silica, the influence of the firing temperature and holding time on the color intensity of Pr-$ZrSiO_4$ pigments were investigated. The Pr-yellow pigments were calcined at 500, 700, 800, 900, 950, 1000, $1100^{\circ}C$ in a ceramic method. The synthesized pigments were characterized by DT-TG thermal analysis, X-ray diffraction, UV-Vis spectroscopy, and SEMEDAX analysis. The relationship between the zircon phase-formation growth and Pr-yellow color development was evaluated and the optimum firing conditions were determined. The color of the pigment samples was characterized on the grounds of the Commission Internationale de l'Eclairage (CIE) standard procedure (CIE $L^*a^*b^*$ measurement) after an application on the bisque ceramic tile.

고효율 LCD 감광막 제거기술 구현 연구 (A Study on the Realization of the High Efficiency LCD Photoresist Removal Technology)

  • 손영수;함상용;김병인;이성휘
    • 한국전기전자재료학회논문지
    • /
    • 제20권11호
    • /
    • pp.977-982
    • /
    • 2007
  • The realization of the photoresist(PR) removal method with vaporized water and ozone gas mixture has been studied for the LCD TFT array manufacturing. The developed PR stripper uses the water boundary layer control method based on the high concentration ozone production technology. We develop the prototype of PR stripper and experiment to find the optimal process parameter condition like as the ozone gas flow/concentration, process reaction time and thin boundary layer formation. As a results, we realize the LCD PR strip rate over the 0.4 ${\mu}m/min$ and this PR removal rate is more than 5 times higher than the conventional immersion type ozonized water process.

건강가정지원센터 홍보 및 시설에 관한 연구 (A Study on PR and facilities for the Healthy Family Support Center)

  • 장진경;오제은;한은주;류진아;원소연
    • 가족자원경영과 정책
    • /
    • 제10권2호
    • /
    • pp.127-149
    • /
    • 2006
  • The purpose of this study was to survey actual condition of a municipal Healthy family Support Center(HFSC) for establishing. 46 subjects were surveyed with a questionnaire about PR and facilities of Healthy Family Support Center. For this study, not only a survey was collected 46 subjects bust also a spot inspection was executed to 8 municipal Healthy Family Support Centers. This study revealed following results: first, the mass media(TV, news paper), internet home page, pamphlet are effective medium. Management of PR activities in the HFSC is consider as one of the main factor to decide development and survival in social community. Therefore HFSC should search fur various method and system of PR. Secondly, the size and facilities of HFSC should be designed according to the specific characteristics of HFSC equipped with office-room, conference room, lecture hall, general/special counseling room, group classroom. Results from this study might be contributed to operate a municipal Healthy Family Support Center in the near future.

  • PDF

L-글루타민산 생산균 Brevibacterium lactofermentum의 Bacteriophag에 관한 연구 (Studies on the Bacteriophages of Brevibacterium lactofermentum)

  • 이태우
    • 미생물학회지
    • /
    • 제17권3호
    • /
    • pp.97-130
    • /
    • 1979
  • Many industrial processes those employ bacteria are subjected to phage infestations. In L-glutamic acid fermentions using acetic acid, the phage infestations of the organisms have been recently recognized. In efforts to elucidate the sources of phage contamination involved in the abnormal fermentation, a series of study was conducted to isolate the phages both from the contents of abnormally fermented tanks and the soil or sewage samples from the surroundings of a fermentation factory, to define major charateristics of the phage isolates, and finally to determine the correlation between the phage isolates and temperate phages originating from the miscellaneous bacterial species isolated from the soil or sewage samples. The results are summarized as follows; 1) All phages were isolated from the irregular fermentation tanks and soil or sewage samples, and they were designated as phage PR-1, PR-2, PR-3, PR-4, PR-5, PR-6, and PR-7, in the order of isolation. These PR-series phages were proved to be highly specific for the variant strains of Br. lactofermentum only, namely, phage PR-1 and PR-2 for Br. lactofermentum No. 468-5 and phage PR-3~PR-7 for Br. lactofemrentum No. 2256. By cross-neutralization test, the 7 phagescould be subdivided into 3 groups, i. e., phage PR-I and PR-2 the first, phage PR-3, PR-4, PR-5, PR-6 the second, and the phage PR-7 the third. 2) The 7 phages were virulent under the experimental conditions. They produced plaques with clear and relatively sharp margins without distinct halo. The mean sizes of plaques were 1.5mm in diameter for phage PR-1 and PR-2, and 1. Omm for phages PR-3~PR-7. Double layer technique modified by Hongo and described by Adams, was applied to assay of the PR-series phages. The factors influencing the plaques were as follows;young age cells of host bacteria cultured for 3-6 hours represented the largest number and size, optimum was pH 7.0, incubation temperature was $30^{\circ}C$, and agar concentration and amount of overlayer medium were 0.6% and 0.2ml, respectively. 3) PR-series phages were stable in 0.05M tris buffer and 0.1M ammonium acetate buffer solution. The addition of $5{\times}10^{-3}M$ magnesium ion effectively increased the stability. Thermostability experiments indicated that PR-series phages were stable at the teinperture between $50^{\circ}{\sim}55^{\circ}C$ in nutrient medium, $45^{\circ}{\sim}50^{\circ}C$ in buffer solution. However, the phages mere completely inactivated at 603C and 65$^{\circ}$C within 10 minutes. The phages were stable at the range of pH6~9 in nutrient medium and of pH 8-9 in buffer solution, respectively. Exposure of the phages to UV for 25, 60 and 100 seconds resulted in the complete loss of infectivily, respectively. 4) Electron microscopy showed that PR-series phage particles exhibited rather similar morphology, differing in the size All of PR-series phages had a multilateral head and had a simple long tiil about three to five times long as compared with head. By the size, phage PR-1 and PR-2, PR-3, PR-4, PR-5, and PR-6 and PR-7 were classified into same groups, respectively. The head and tail size of phage PR-1, PR-5, PR-5(T) and PR-7 were 85nm, 74nm and 235nm and 350mm, and 72nm and 210nm, respectively. 5) Nucleic acids of PR-series phages were double stranded DNA. The G+C contents of phage PR-1, PR-5 and PR-7 were 56.1, 52.9 and 53.7, respectively. The values of G+C contents derived from the $T_m$ were in agreement with the chemically determined values. 6) PR-series phages effectively adsorbed on their host bacteria at the rate of more than 90% during 5 min. K value for phage PR-1, PR-5 and PR-7 were calculated to be $6{\times}10^9 ml$ per minute, respectiveky. The pH of the medium did effect adsorption rate, but both temperature and age of host cells did not. Generally, optimum adsorption condition of phages seemed to be almost same as optimum growth conditions of host bacteria. 7) In one-step growth experiments, the latent periods at $30^{\circ}C$ for PR-1, and PR-7 were about 70, 50 and 55 min, respectively. The corresponding average burst size was 200, 70 and 90, respectively. Lpsis period according to the multiplicity of infection and a phage series. In case of m. o. i. 100, strain No. 2256 (PR-5) and No. 468-5(PR-1) failed to grow and turbidity decreased after 50 and 70min, respectively. 8) In the lysate of a plaque purified phage PR-5 infected bacteria, there observed 2 types ofphage particles, i. e., phage PR-5 and PR-5 (T) of similar morphology but differing at the length of phage tail, and phage tail like particles. The phage taillike particles could be divided into 4 types by the length. Induction experiments of Br. lactofermentum with UV irradiation, mitomycin C or bacitracin treatment produced neither phage PR-5 (T) or phage tail-like particles. 9) No lysis occured when the growth of 7 strains of miscellaneous bacteria, isolated from soil and sewage samples, were inoculated with either phage PR-5 (T) or phage tail-like particles the inoculation of phage PR-5 pellet resulted in the growth inhibition of the orgainsms in the spot test. The lysates obtained from 3 miscellaneous soil derived bacteria following mitomycin C treatment the growth of Br. lactofermentum, but did not lyze the bacterium.

  • PDF