• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.143-151
• /
• 2018

In this paper, a novel hybrid configuration combining a phase-shift full-bridge (PSFB) and a half-bridge resonant LLC converter is proposed for the On-Board Charger of Electric Vehicles (EVs). In the proposed converter, the PSFB converter shares the lagging-leg switches with half-bridge resonant converter to achieve the wide ZVS range for the switches and to improve the efficiency. The output voltage is modulated by the effective-duty-cycle of the PSFB converter. The proposed converter employs an active reset circuit composed of an active switch and a diode for the transformer which makes it possible to achieve zero circulating current and the soft switching characteristic of the primary switches and rectifier diodes regardless of the load, thereby making the converter highly efficient and eliminating the reverse recovery problem of the diodes. In addition an optimal power sharing strategy is proposed to meet the specification of the charger and to optimize the efficiency of the converter. The operation principle the proposed converter and design considerations for high efficiency are presented. A 6.6 kW prototype converter is fabricated and tested to evaluate its performance at different conditions. The peak efficiency achieved with the proposed converter is 97.7%.

• Journal of Trauma and Injury
• /
• v.34 no.1
• /
• pp.50-56
• /
• 2021

Purpose: Fractures are common in the military population, but limited studies have investigated the incidence of fractures among Korean military personnel. Hence, this study aimed to clarify this issue. Methods: Eligible subjects were patients who had sustained a fracture and were registered in the N-DEMIS (the medical records system of participating hospitals) from June 2017 to May 2019. Fractures were categorized according to the fracture site, patients' age, sex, and type of duty. Results: In total, 23,687 patients with 23,981 fractures were included. There were 216 patients with multiple fractures, of whom 156 had fractures at two sites, 42 had fractures at three sites, and 18 had fractures at four sites. Of the 23,687 patients, 23,340 were men and 347 were women. The incidence of fractures in men and women was 12.96 per 1,000 person-years and 0.19 per 1,000 person-years, respectively. In terms of the broad location of fractures, the percentage of fractures was the highest in the hand, followed by the foot and lower leg. When the location of fractures was analyzed more specifically, the percentage of fractures was the highest in the phalanx (thumb and fingers), followed by the ankle and metacarpal bones. Conclusions: Hand, foot, ankle, and wrist fractures were the most commonly encountered fractures in the Korean military population. To prevent the loss of combat power due to non-battle-related injuries, thorough preparation is necessary, including protective equipment and preliminary training for areas with a high frequency of fracture occurrence.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.49-61
• /
• 2022

This study aims to provide upper body shape information by analyzing the measurement data of middle-aged women aged 50-69, including baby boomers, whose economic power and activity have improved compared to the previous generations. In order to provide accurate upper body shape information by analyzing the body type using the 8th Size Korea measurement data, body shapes were classified through factor and cluster analysis using 75 direct measurement items. Upper body type was classified according to the factors, and the associated characteristics were analyzed. As a result of the comparative analysis of the upper body measurements from the 4th to the 8th Size Korea measurement, it was found that in the height item, both the waist height and the hip height increased, making the overall height greater and the leg length longer. The body circumference items tended to increase, but were found to decrease significantly in the 8th Size Korea (2021) measurement. Middle-aged women were classified using five factors. Factor 1 was the upper body obesity factor, and Factor 2 was the trunk vertical factor. Factor 3 was the width of the back shoulder, Factor 4 was the vertical factor behind the back, and Factor 5 was the length factor of the front garment composition. Middle-aged women were classified into four body types through cluster analysis. Type 1 is relatively small and skinny, Type 2 has the most obese upper body and developed back shoulders, and Type 3 is skinny and has a long back and short front. In Type 4, the upper body was relatively long and the shoulders were narrow.

• The Journal of Korean Physical Therapy
• /
• v.33 no.1
• /
• pp.7-15
• /
• 2021

Purpose: This study was examined to improve the standing posture of a scoliosis client using the ICF Tool. Methods: For examination, the study subject was a 16-year-old female student diagnosed with 3curve-pelvic (3CP) type scoliosis. Information about her were collected through a client interview and based on international Classification of Functioning, Disability and Health (ICF). The ICF core set was for post-acute musculoskeletal conditions, and the ICF level 2 items suggested by National Rehabilitation Information Center (NARIC) were added to the recommendations for scoliosis. For evaluation, the ICF assessment sheet was used to identify the interaction among the problems. For the diagnosis, the client's functional problems were described in ICF terms. For the prognosis, the global goals for reaching the client's functional activity and participation level were presented as the long-and short-term goals. For the intervention, a coordinative locomotor training program composed of warm-up, main exercise, and cool-down was applied 3 times a week, 50 minutes a day, for 5 weeks. For the outcome, the differences between before and after the intervention were compared with the ICF qualifier and are shown with the ICF evaluation display. Results: Clinical advantages were observed in body function and structure (7° decrease of thoracic angle, 7 score increase of trunk muscle power, 6.47s improve of one leg standing, 4 score decrease of neck pain). The activity for maintaining the standing posture, in which the client had a primary limitation, was improved. Conclusion: Applying the coordinative locomotor training program is expected to improve scoliosis client's standing posture.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.3080-3087
• /
• 2023

Thermoelectric (TE) materials working in radioisotope thermoelectric generators are irradiated by neutrons throughout its service; thus, investigating the neutron irradiation stability of TE devices is necessary. Herein, the influence of neutron irradiation with fluences of 4.56 × 10¹⁰ and 1 × 10¹³ n/cm² by pulsed neutron reactor on the electrical and thermal transport properties of n-type Bi₂Te_2.7Se_0.3 and p-type Bi_0.5Sb_1.5Te₃ thermoelectric alloys prepared by cold-pressing and molding is investigated. After neutron irradiation, the properties of thermoelectric materials fluctuate, which is related to the material type and irradiation fluence. Different from p-type thermoelectric materials, neutron irradiation has a positive effect on n-type Bi₂Te_2.7Se_0.3 materials. This result might be due to the increase of carrier mobility and the optimization of electrical conductivity. Afterward, the effects of p-type and n-type TE devices with different treatments on the output performance of TE devices are further discussed. The positive and negative effects caused by irradiation can cancel each other to a certain extent. For TE devices paired with p-type Bi_0.5Sb_1.5Te₃ and n-type Bi₂Te_2.7Se_0.3 thermoelectric legs, the generated power and conversion efficiency are stable after neutron irradiation.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1651-1664
• /
• 2023

It is very difficult to capture the multi-dimensional phenomena such as asymmetric flow and temperature distributions with the one-dimensional (1D) model, obviously, due to its inherent limitation. In order to overcome such a limitation of the 1D representation, many state-of-the-art system codes have equipped a three-dimensional (3D) component for multi-dimensional analysis capability. In this study, a standard multi-dimensional analysis model of APR1400 (Advanced Power Reactor 1400) has been developed using TRACE (TRAC/RELAP Advanced Computational Engine). The entire reactor pressure vessel (RPV) of APR1400 has been modeled using a single 3D component. The fuels in the reactor core have been described with detailed and coarse representations, respectively, to figure out the impact of the fuel description. Using both 3D RPV models, a comparative analysis has been performed postulating a double-ended guillotine break at a cold leg. Based on the results of comparative analysis, it is revealed that both models show no significant difference in general plant behavior and the model with coarse fuel model could be used for faster transient analysis without reactor kinetics coupling. The analysis indicates that the asymmetric temperature and flow distributions are captured during the transient, and such nonuniform distributions contribute to asymmetric quenching behaviors during blowdown and reflood phases. Such asymmetries are directly connected to the figure of merits in the LBLOCA analysis. Therefore, it is recommended to employ a multi-dimensional RPV model with a detailed fuel description for a realistic safety analysis with the consideration of the spatial configuration of the reactor core.

• Journal of Korean Foot and Ankle Society
• /
• v.27 no.1
• /
• pp.12-16
• /
• 2023

Purpose: Postoperative exercise for acute Achilles tendon rupture is important for a patient's return to daily life and sports. On the other hand, the protocol requires considerable effort to educate patients and continuous checking. This study evaluated the outcome of a new simple and delayed rehabilitation protocol after Achilles tendon rupture repair. Materials and Methods: From July 2014 to November 2020, one hundred eighty-three patients were operated on by one surgeon. The exercise protocol was classified into two methods. One group (immediate protocol, control group) started immediate full weight bearing with a 20° plantar flexion range of motion from two days postoperatively. Ankle dorsiflexion was restricted to 0°. The other group (delayed protocol, case group) started full weight bearing with a controlled ankle motion boot from two weeks postoperatively. No range of motion exercise was allowed until six weeks postoperatively. Age, sex, body mass index, ankle range of motion, muscle power, time to return to previous physical activity, functional score, and complication rate were evaluated. The results of the two groups were compared using a Mann-Whitney test. Statistical significance was set as p<0.05. Results: The range of motion, double heel rising, and one-leg standing were achieved faster in the control group (p<0.05). However, single-heel rising, repeated single-heel rising, return to previous activity (work, run, and sport), and functional scores showed no statistical difference (p>0.05). Conclusion: Simple and delayed postoperative rehabilitation of acute Achilles tendon rupture without active range of motion exercises showed satisfactory functional results and a low complication rate.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2718-2731
• /
• 2024

To ensure the operational safety of nuclear power plants, we present a Quadruped Inspection Robot that can be used for many types of steam generators. Since the Inspection Robot relies on the Holding Modules to grip the tube-sheet, it can be regarded as a hybrid robot with variable configurations, switching between 4-RRR-RR, 3-RRR-RR, and two types of 2-RRR-RR, and the variable configurations bring a great challenge to dimensional synthesis. In this paper, the kinematic model of the Inspection Robot in multiple configurations is established, and the analytical solution is given. The workspace mapping is analyzed by the solution-space, and the workspace of multiple configurations is decomposed into the workspace of 2-RRR to reduce the analysis complexity, and the workspace calculation is simplified by using the envelope rings. The optimization problem of the manipulator is transformed into the calculation of the shortest contraction length of the swing leg. The switching performance of the Inspection Robot is evaluated by stride-length, turning-angle, and workspace overlap-ratio. The performance indexes are classified and transformed based on the proportions and variation trends of dimensional parameters to reduce the number of optimization objective functions, and Pareto optimal solutions are obtained using an intelligent optimization algorithm.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.96-108
• /
• 2015

A passive containment cooling system has been designed to remove the heat inside a containment during accidents without external power supply. In this work, the PCCS was introduced in the APR1400 plant to replace the containment spray system and, then, the thermal-hydraulic performance of the PCCS was analyzed using the system thermal-hydraulic computer code, MARS. A double-ended cold-leg break accident, which is known to induce the maximum pressure in the containment, is simulated, where the thermal hydraulics of the PCCS, the reactor coolant system, and the containment are simultaneously simulated. The results of the calculations showed that the PCCS can replace the existing spray system and that the containment building and its internal structure also play a very important role for the heat removal during the accident. Some sensitivity calculations were carried out to evaluate the model uncertainty and the effects of design parameters. The limitations of the PCCS are also discussed.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.8 no.2
• /
• pp.31-43
• /
• 2002

The subjects of this study were 15 woman soccer players and 15 untrained woman students at H-Cheju University. Each subject was measured on the muscle strength and peak torque of knee extensors and knee flexors with isokinetic load ($60^{\circ}$/sec, $180^{\circ}$/sec). The results were as follows: 1. There was no significant difference between right and left leg strength measured isokinetically in each group. 2. The peak torque of knee extensors and flexors was significantly higher in scoccer players than untrainded students (p<0.001). 3. For the angle of knee joint showing the highest peak torque, there was significant difference between soccer players and untrained students in knee extensors(p<0.05) and right flexors (p<0.01). 4. For knee H/Q ratio, there was significant difference between two groups(p<0.05). 5. For the total work and average power at $180^{\circ}$/sec, there was significant difference between two groups in knee extensors(p<0.001) and flexors(p<0.01). 6. In soccer players at $60^{\circ}$/sec, there were significant correlations between peak torque and height and between peak torque and weight.(p<0.001). 7. For the muscular contraction velocity at $60^{\circ}$/sec, there was significant difference between two groups in flexors (p<0.01). 8. For the muscular indurance at $180^{\circ}$/sec in extensors and flexors, there was no significant difference between two groups(p<0.05). In conclusion, there were significantly higher in peak torque, contraction velocity, knee joint's angle with the highest peak torque, H/Q ratio, total work and average power in woman scoccer player than general students. But there was no significant difference in muscular endurance. Soccer performance is based on the various components including muscular endurance that is one of the most important components. So it is necessary that the training method to improve the various components (especially including muscular endurance) should be done.