• Journal of radiological science and technology
• /
• v.45 no.6
• /
• pp.483-489
• /
• 2022

This study proposes a new skull lateral examination, and provides an improved examination environment for patients and radiologists. The study was divided into three groups. One group was divided into the SID (source to image receptor distance) 110 ㎝ and 180 ㎝ in the skull lateral posture, the other group The other group was divided into an position in contact with the detector and an position without contact with the detector, and the other group was divided into male and female groups, considering that the difference in shoulder width between adult males and females would affect the dose and image quality. For dose evaluation, the ESD (entrance surface dose) was measured at the EAM (external auditory meatus), and the conditions were applied equally at 70 ㎸p, 200 ㎃, and 10 ㎃s. For image quality evaluation, SNR (signal to noise ratio) and CNR (contrast to noise ratio) were measured in frontal sinus, EAM, and sella turcica. As a result of ESD comparison, when sid 110 ㎝ to sid 180 ㎝ was changed among the three groups, ESD values decreased the most to 729.18±4.62 μ㏉ and 224.18±0.74 μ㏉ at 180 ㎝ (p<0.01). The values of SNR and CNR were statistically significant (p<0.01), but there was no qualitative difference. This shows that when the SID is 180 ㎝, it is possible to reduce the dose without lowering the image quality. So, It is suggested that the SID 180 ㎝ is used without contacting the detector when examining the skull lateral.

• Journal of the Korean Society of Costume
• /
• v.57 no.6 s.115
• /
• pp.1-16
• /
• 2007

The study aimed to develop the nightgown considering the construction and design features of the Shimui and the Cheolik. The analysis on the construction features of the Korean traditional costume and the physiological and motional attributes while sleeping resulted into the construction factors of the nightgown developed in the study. Consequently, the nightgown having these traditional Korean costume features were made for the evaluation. 4 different types of nightgowns were designed to be constructed. 20 professional clothing staff evaluated these 4 nightgowns developed and the existing nightgown used in the hotel industry. The results from the wearing test evaluation were: (1) to consider the stable closure of the gowns while wearing, the scores of the gowns developed were higher than the existing one. (2) the evaluations of the wearing comfort of the standing posture for the gowns developed and the existed were more or less similar but considering the lying down posture, the scores of the developed ones were significantly higher. (3) the gowns developed to have the wide-ham lines were considered more appropriate to the leg movement compared to the existing gown. The results from the fit and appearance test evaluation were: (1) throughout the all hight levels, the means of the gowns developed were higher than the existing gown's means in the most of the evaluation questions. (2) in the evaluation of the Korean traditional features, the gowns developed were more appropriate than the existing one. Consequently, the gowns developed were considered better to compare to the existing one in the context of postures, movements, comfort, appearance, fit, and design features.

• Journal of Biosystems Engineering
• /
• v.34 no.2
• /
• pp.120-126
• /
• 2009

The purpose of this study was to develop a visibility evaluation system for cabin type combine. Human's field of view was classified into five levels (perceptive, effective, stable gaze, induced, and auxiliary) depending on rotation of human's head and eye. Divider, reaper lever, gearshift, dashboard, and conveying part were considered as major viewpoints of combine. Visibilities of combine was evaluated quantitatively using the viewpoints and the human's field of view levels. The visibility evaluation system for cabin type combine was consisted of a laser pointer, stepping motors to control the direction of view, gyro sensors to measure horizontal and vertical angle, and I/O interface to acquire the signals. Tests were conducted with different postures ('sitting straight', 'sitting with $15^{\circ}$ tilt', 'standing straight', and 'standing with $15^{\circ}$ tilt'). The LSD (least significant difference) multiple comparison tests showed that the visibilities of viewpoints were different significantly as the operator's postures were changed. The results showed that the posture at standing with $15^{\circ}$ tilt provided the best visibility for operators. The divider of the combine was invisible due to blocking with the cabin frame at many postures. The reaper lever showed good visibilities at the postures of sitting or standing with $15^{\circ}$ tilt. The gearshift, the dashboard, and the conveying part had reasonable visibilities at the posture of sitting with $15^{\circ}$ tilt. However, most viewpoints of the combine were out of the stable gaze field of view level. Modifications of the combine design will be required to enhance the visibility during harvesting operation for farmers' safety and convenience.

• Journal of the Korean Society of Costume
• /
• v.59 no.9
• /
• pp.16-25
• /
• 2009

The purpose of this study is to develop pattern of a Upper Garment Prototype for late elementary school aged girls. The body of late elementary school aged girls changes steadily up to the adult and is characterized by its periodic noticeable physical distinctions. This study is selected a test pattern from 3 existing patterns through a preliminary wearing test, conducted wearing tests, and sensory evaluations three times to review and improve the pattern, and presented the pattern of late elementary school aged girls. The research pattern was developed considering aesthetic and functional aspect. The average score of sensory evaluation on appearance was 4.13 for the research pattern, which was higher than 2.74 for the test pattern. The according to the results of verifying significant differences in the test items between the two patterns through the t-test, in the items such as pleats in the line of a waist, the ease of the girth of a waist, the location of shoulder line was superior to the test pattern. The average score of the sensory evaluation on functionality was 4.91 for the research pattern, which was higher than 3.90 for the test pattern. The research pattern is superior to the test pattern in static posture, dynamic posture than the test pattern.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.3
• /
• pp.134-141
• /
• 2007

It is crucial that the WRMSD is realized as a critical job-related diseases for the construction workers. It is caused by the characteristics of repetitive work, uncomfortable work methods and continuous unsuitable physical posture. The objective of this research is to evaluate the workload for the carpenters and structural steel workers. Investigation on the posture and behavior for the workers as well as personal sensitivity to the workload is conducted. The laboratory tests with graduate students are conducted to estimate inconvenience in terms of personal sensitivity to the workload. The results of this research will be used to perform the further researches on ergonomic and technological approaches to improvements of the hand-intensive tasks in the construction industry.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.1
• /
• pp.43-56
• /
• 2003

Observational methods such as OWAS, RULA, and REBA have been widely used to identify posture-related risks of musculoskeletal disorders in industry, since they are useful and efficient in evaluating postural stresses. However. there are few studies comparing the methods and providing guidelines for selecting and using the methods. They have been developed based on different backgrounds and with different application areas. Each method has its own characteristics. which must be considered in selecting and using them. In this study. 17 male subjects evaluated 42 different working postures that frequently assumed in the automobile assembly line using a psychophysical method. The postures were then evaluated by different observational methods. The results of the observational methods were compared with psychophysically evaluated stresses. The observational methods resulted in different values of stresses for certain postures. For some postures showing high values of perceived discomfort. the observational methods showed different values of stresses. These results showed that the observational methods should be used differently according to application area and they have some weak points to be improved.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.2
• /
• pp.31-38
• /
• 2020

The study evaluated the accuracy and intra-rater reliability for OWAS (Ovako Working posture Analysing System), RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment) to improve their evaluation accuracy and reliability. Participants (n = 163) with undergraduate degree were recruited in this study and trained for 6 hours about the ergonomic assessment methods. Ergonomic assessments were conducted using OWAS, RULA, and REBA for a representative work with dynamic posture found in manufacturing industries. The study compared action categories (overall level) and detailed evaluation scores for individual body part. Action categories of the participants significantly differed from the golden reference defined by ergonomic experts. The participants underrated or omitted scores for truck (37.4% of the participants) and legs (52.8%) in OWAS. Similarly, the participants underrated or omitted additional scores for all body parts except the hand and wrist in RULA (53.5%) and REBA (54.8%). On the other hand, the participants overrated scores for the hand and wrist in RULA (55.2%) and REBA (39.9%). The results found in this study can help of selecting focus points and parts during assessment and education to improve accuracy and reliability of the ergonomic assessment methods.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.2
• /
• pp.87-92
• /
• 2024

This study aims to compare six observational methods for assessing arm- and hand-intensive tasks, based on literature review. The comparison was conducted in viewpoints of body regions, force/external load, motion repetition, other factors including static posture, coupling, duration/break, pace, temperature, precision task, and final risk or exposure level. The number of risk factors assessed was more, and assessment procedure was more complex than the observational methods for assessing whole-body postural loads such as Ovako Working Posture Analysis System(OWAS), Rapid Upper Limb Assessment(RULA), and Rapid Entire Body Assessment(REBA). Due to these, the intra- and inter-reliabilities were not high. A past study showed that while Hand Arm Risk Assessment Method(HARM) identified the smallest proportion of the work tasks as high risk, Strain Index(SI) and Quick Exposure Check(QEC) hand/wrist were the most rigorous with classifying most work tasks as high risk. This study showed that depending on the observational technique compared, the evaluation factors, risk or exposure level, and evaluation results were different, making it necessary to select a technique appropriate for the characteristics of the work being assessed.

• The Journal of Korean Physical Therapy
• /
• v.30 no.4
• /
• pp.141-145
• /
• 2018

Purpose: Changes in the curvature of the vertebral columns of elderly women with increasing age causes various side effects and disorders. Therefore, this study was conducted to evaluate the effectiveness of the 8-figure scapular brace to improve pulmonary function and balance ability based on lung capacity and foot pressure by increasing the vertebral curvature. Methods: Seventeen elderly women with a forward head posture were selected. Women were asked to wear the 8-figure scapular brace and the forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) were measured, as were changes in foot pressure. Measurements were conducted three times each and the mean values were used for subsequent analyses. For static evaluation, we used the paired t-test to identify differences between pre and post values. Results: There was no significant difference in FEV1 and FVC before and after use of the brace (p>0.05); however, there was a significant decrease in forefoot pressure and an increase in rearfoot pressure following application of the brace (p<0.05). Conclusion: Application of the 8-figure scapular brace to correct vertebral curvature in elderly women influenced pressure distribution change from immediate effect body arrange of cervical and thoracic. However, wearing the 8-figure scapular brace may interfere with expansion of the chest and therefore respiratory muscle activity. Accordingly, it is necessary to apply appropriate treatment when wearing a scapular brace and to allow a sufficient intervention period while also providing therapeutic interventions such as posture correction or respiration training.

• Journal of the Korean Home Economics Association
• /
• v.40 no.11
• /
• pp.193-205
• /
• 2002

To evaluate farmers' workload during harvesting grapes in summer, this study investigated farmers' physiological, psychological responses, work postures and thermal environment around in the field. This field study was conducted in the Anseong County of Kyonggi Province at the end of August. Five career farmers (1 male, 4 females) volunteered as subjects. Three of them were over their sixties. During harvesting grapes in the field, physiological responses were monitored continuously. 1. Air temperature (T/sub a/), air humidity(H/sub a/), black globe temperature(T/sub g/), air velocity and WBGT around the grape field were 26.9℃, 77.7%RH, 32.8℃, 0.08㎧ and 26.3℃, respectively. Because farmers started the harvesting task in early morning, thermal environments weren't conditions to give farmers severe heat strain. 2. The percentage of the work postures was larger in order of standing, walking, and bending one's back posture. Particularly, the percentage of standing posture with raising both arms above shoulder of two farmers was up to 29% and 61% of the total work duration. 3. Rectal temperature (T/sub re/), mean skin temperature (T/sub sk/), clothing microclimate temperature (T/sub cl/) on the chest and the back, heart rate (HR) and energy expenditure (EE) were 37.2℃, 33.1℃, 32.0℃, 32.4℃, 88bpm and 1.3 Kca1/㎡/min respectively. In the point of these physiological results, we evaluated that the harvesting task was a moderate work. 4. All farmers expressed‘hard, hot, humid and slightly uncomfortable’ at the end of works for each subjective questionnaire. The grape harvesting tasks were not evaluated as a very hard work in the point of physiological work standards. But we considered 1) inappropriate work posture (standing posture with raising both arms above shoulder) and 2) farmers' age as burden factors. These findings suggest that adding adequate protective clothing/equipments for farmers may contribute to maintain their body temperature within the normal range, stabilize HR and decrease psychological strain.