• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.295-302
• /
• 2017

Polyurethane dispersion (PUD) polymers were synthesized by using polyether and polyester polyol. The effect of ionomeric centers, r(NCO / OH) values, chain extender process, and chain extender types on the adhesion properties was investigated. In the case of polyether-based PUD, the ionic center, r value, chain extension process and chain extender types were not adjusted even after adjustment. In the case of polyester-based PUD, when the ionic center content was more than 2.5%, the state of adhesive strength was $2.0kgf/cm^2$ or more. On the other hand, the initial adhesive strength was excellent at about $1kgf/cm^2$ when the ionic center content was over 3.5%. When the r value was 1.3 or more, it was found that the initial bonding strength and the state of bonding strength were excellent at about $1kgf/cm^2$ and $2.1kgf/cm^2$ or higher, respectively. An IR spectrum analysis of the synthesized PUD confirmed that PUD was composed of urethane based on the N-H characteristic peak at $3340cm^{-1}$ and the urethane characteristic peak at $1730cm^{-1}$. Moreover, the characteristic peaks of the isocyanate ($2260cm^{-1}$) used in the preparation of the prepolymer were not observed. As a result, the residual -NCO was not observed, and urethane was completely synthesized.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.264-271
• /
• 2013

In this study, we have synthesized waterborne polyurethane dispersion(WPU) and analyzed mechanical properties of WPU film and leather coatings in different content of monoammonium phosphate. According to the measured data by DSC, sample WPU-AM3 which included high content of monoammonium phosphate showed the highest Tm at $382^{\circ}C$. All samples had good solvent resistance. In tensile tests, WPU-AM3($2.130kg_f/mm^2$) had the lowest physical properties. Also abrasion resistance properteis and elongation properties were investigated, WPU-AM3 had lowest physical properties with 52.07 mg.loss for abraison and 615 % of elongation.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.60-66
• /
• 1993

Aqueous polyurethane(PU) anionomer dispersions were prepared from isophorone diisocyanate (IPDI), polytetramethylene adipate glycol(PTAd) and dimethylol propionic acid(DMPA) as potential anionic centers. The effects of polyol molecular weight(Mn) on the state of dispersion, thermal, mechanical, and viscoelastic properties and swelling of emulsion cast film were determined. With increasing Mn of PTAd, particle size of emulsion and soft segment T$_{g}$ decreased, and solvent swell, emulsion viscosity, and hard segment $T_{g}$ increased. Tensile strength showed minimum with PTAd 1000, and elongation at break generally increased with the Mn of PTAd. These results were possibly nterpreted in terms of soft segment-hard segment phase separation and crystallization of high molecular weight PTAd.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.9-16
• /
• 2002

In the synthesis of water-based polyurethane using self-emulsification process, after being neutralized, polyurethane pre-polymers containing ionic pendant groups are dispersed by simple convective mixing. Preparation of dispersion is followed by chain extension reaction, which is considered as important step for growth of the molecular weight of polyurethane. In this work, pH variations in the aqueous phase were monitored during the chain extension process in the presence of water-soluble diamines. The optimum degree of chain extension and the average particle size in the polyurethane dispersions were examined with varying ionic pendent group contents, type of chain extenders, and feed rate of chain extenders, The initial pH value in the aqueous phase linearly increased and the optimum chain extension point could be obtained from the intersection of two linear lines having different slopes, All average particle sizes before chain extension reaction were almost same, however, the final average particle size increased as feed rates of chain extenders increased, In addition, as the ionic pendant group contents increased, the particle size decreased since the hydrophilicity and hydrodynamic volume increased. As carbon numbers of the chain extenders increased, the final particle size increased significantly. From the results, it was concluded that the chain extension reaction took place among the particles not only in a particle.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.52-62
• /
• 1997

Abstract Polyurethanes have been designed and fabricated into membranes with unique separation properties. Moreover, polyurethane microcapsules also have been reported actively as controlled release materials for their excellent blood compatibility, tensile strength and permeability. In this study, polyurethane microcapsules were synthesized by interfacial polymerization in an aqueous poly(ethylene glycol) dispersion of toluene diisocyanate in perfume oil using poly(vinyl alcohol) as the stabilizing agent. The effect of a few important process conditions on the average particle size and distributions, morphologies, and thermal properties to design microcapsules for the sustained release system was investigated.

• Macromolecular Research
• /
• v.13 no.5
• /
• pp.418-426
• /
• 2005

One-pack cross-linkable nanocomposites of waterborne methyl ethyl ketoxime (MEKO)-blocked aromatic polyurethane dispersion (BPUD) reinforced with organoclay (quaternary ammonium salt of Cloisite 25A) were synthesized by the acetone process using 4,4'-methylenedi-p-phenyl diisocyanate (MDl), poly(tetramethylene) glycol (PTMG), dimethylol propionic acid (DMPA), and methyl ethyl ketoxime (MEKO). Particle size, viscosity, and storage stability of these nanocomposites were investigated. TEM and XRD studies confirmed that the silicate layers of organophilic clay were exfoliated and intercalated at a nanometer-scale in the BPUD matrix.

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.26-31
• /
• 2007

Nanocomposite resin(PUD-CNT) composed of Carbon nanotube(CNT) and Polyurethane Dispersion (PUD) was prepared by different contents of CNT($0{\sim}5%$). PUD-CNT was coated on samples, and their electrical conductivity was investigated. With increasing CNT content, static change, half life and surface resistance decreased. Composites having 5% CNT showed $10^9{\Omega}/cm$(surface resistance), and 40V (stactic charge). Respectively, From this results, PUD-CNT can be used as a antistatic material.

• Carbon letters
• /
• v.11 no.2
• /
• pp.96-101
• /
• 2010

Dispersion of the functionalized multiwalled nanotubes (MWNT) in the polyurethane (PU) matrix and DC conductivity of the MWNT/PU composites are investigated with the oxidation conditions, the kind of surfactants and their content. First, the most optimal surfactant type and its critical micelle concentration in the MWNT suspension are determined as a cationic surfactant, benzalkonium chloride (BKC) of 0.6 wt.% to the MWNT content from DEA and FESEM results. All the MWNT oxidized under several conditions are negatively charged and functionalized with carboxylic group, whereas the degree of damage is different from oxidation conditions. In addition, each MWNT/PU composite derived from several oxidation conditions shows different DC conductivity at a characteristic MWNT content. It is found that in order to enhance DC conductivity of the polymeric composites containing the oxidized MWNT the better dispersion of MWNT should be obtained by effective functionalities and surfactant adsorption with preserving the intrinsic geometry of pristine MWNT.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.69-78
• /
• 2012

This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.296-304
• /
• 2014

For this research, prepared polyurethane dispersion of hard segment type and polyethylene emulsion wax. Use these resin, this article has been analyzed about mechanical properties variation by increasing amount of polyethylene emulsion wax on Lam skin leather and dried film. According to measure data for solvent resistance, PUD had good property. As known in the results, increase of polyethylene wax constant did not influence to big variation of hybrid resin properties. As test of tensile strength, PUD had good tensile characteristic($1.235kg_f/mm^2$) and PUD-EW4 had lowest tensile characteristic($1.022kg_f/mm^2$). As same as tensile characteristic, abrasion test determined PUD(52.225 mg.loss) had highest properties. In elongation case, PUD showed 698 % modulus which was best properties in this experiment.