• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.281-281
• /
• 2022

바닥에서 생성되는 난류는 순간적으로 강한 모멘텀을 바닥에 전달함과 동시에 바닥에 있는 입자를 움직이게 한다. 경계층 내 난류 운동에 대한 분석은 다양한 유사 이송 문제를 이해하기 위해 필수적이며 이에 따라 많은 선행 연구들은 실험실 실험을 통해 해당 연구를 수행하였다. 본 연구에서는 선행 연구에서 사용하지 못했던 진보된 실험 방법을 활용하여 바닥 경계층 내의 난류 운동에 대해 확인하고 해당 운동에 의해 관성 입자의 움직임이 어떻게 발생하는지에 대하여 물리적으로 설명하고자 한다. 다양한 흐름 조건에서 3가지의 입경 크기를 가지는 모래 입자를 가지고 실험을 수행하였으며, 실험 조건별 고해상도 유속장 및 관성 입자의 움직임은 3차원 입자 영상 유속계 (Particle Image Velocimetry; 이하 PIV)와 입자 추적 유속계 (Particle Tracking Velocimetry; 이하 PTV)를 동시에 적용하여 파악하였다. 취득된 3차원 유속장과 입자 궤적을 기반으로 실험 조건별 흐름 및 입자 거동 특성에 대해 분석하였으며, 관성 입자의 움직임을 발생시키는 3차원 난류 운동은 측정된 유속장에서 산정한 Q-criterion 값을 기반으로 도식화하였다. 측정값 내에는 난류 운동에 대한 정보와 더불어 잡음이 포함되어 있으므로 이를 제거하고자 적합 직교 분해 (Proper Orthogonal Decomposition; 이하 POD) 방법을 적용하였다. 그리고 POD로 추출한 유속장을 통해 바닥면 부근에 존재하는 헤어핀 와류 운동 혹은 와류 묶음과 같은 난류 고유 구조를 파악하였다. 해당 와류 운동들의 3차원 난류 특성을 확인하고자 비등방성 불변 지도(anisotropy invariant map)를 활용하였으며 경계층 내부에서 난류의 형태가 흐름 방향으로 늘어진 럭비공 형태임을 확인하였다. 마지막으로, 입자의 움직임을 발생시키는 난류 이벤트를 결정하고자 사방구 분석 (Quadrant analysis) 기법을 적용하였으며 흐름 조건별로 입자를 움직이게 하는 난류 이벤트는 달라짐을 확인하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.436-442
• /
• 2008

Graphite material has been recognized as a very competitive candidate for reflector, moderator, and structural material for very high temperature reactor (VHTR). Since VHTR is operated up to $900-950^{\circ}C$, small amount of impurity may accelerate the oxidation and degradation of carbon graphite, which results in increased porosity and lowered fracture toughness. In this study, ultrasonic wave propagation properties were investigated for both as-received and degradated material, and the feasibility of ultrasonic testing (UT) was estimated based on the result of ultrasonic property measurements. The ultrasonic properties of carbon graphite were half, more than 5 times, and 1/3 for velocity, attenuation, and signal-to-noise (S/N) ratio respectively. Degradation reduces the ultrasonic velocity slightly by 100 m/s, however the attenuation is about 2 times of as-receive state. The results of probability of detection (POD) estimation based on S/N ratio for side-drilled-hole (SDHs) of which depths were less than 100 mm were merely affected by oxidation and degradation. This result suggests that UT would be reliable method for nondestructive testing of carbon graphite material of which thickness is not over 100 mm. In accordance with the result produced by commercial automated ultrasonic testing (AUT) system, human error of ultrasonic testing is barely expected for the material of which thickness is not over 80 mm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.91-99
• /
• 2005

Flight compatibility certification is performed to substantiate the compatibility between ALQ-X ECM pod and KF-16D/RF-4C aircraft. A certification plan for the ALQ-X flight compatibility is established. Similarity analysis, mass/inertia analysis, structural analysis/test, and ground vibration test/flutter analysis are made to support the safety of MIL-HDBK-1763 Test 250 (Captive compatibility flight profile). Aircraft flew along flight envelope boundary with representative ALQ-X configurations. Handling qualities are evaluated by comparing flight characteristics of the aircraft with and without ALQ-X. Structural integrity and endurance is evaluated using measured flight test data. Results of these flight tests showed that ALQ-X is compatible with KF-16D/RF-4C without altering the flight envelope which has originally been certified for ALQ-88 and ALQ-119 ECM pods. ALQ-X certification program made following technical achievements: Type III certification for foreign designed fighter, flutter analysis program development using GVT results, and utilization of MIL-STD-1553B data bus in flight test.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.280-280
• /
• 2023

강수의 정확한 시·공간적 추정은 홍수 대응, 가뭄 관리, 수자원 계획 등 수문학적 모델링의 핵심 기술이다. 우주 기술의 발전으로 전지구 강수량 측정 프로젝트(Global Precipitation Measurement, GPM)가 시작됨에 따라 위성의 여러 센서를 이용하여 다양한 고해상도 강수량 자료가 생산되고 있으며, 기후변화로 인한 수재해의 빈도가 증가함에 따라 준실시간(Near-Real-Time) 위성 강수 자료의 활용성 및 중요성이 높아지고 있다. 하지만 준실시간 위성 강수 자료의 경우 빠른 지연시간(latency) 확보를 위해 관측 이후 최소한의 보정을 거쳐 제공되므로 상대적으로 강수 추정치의 불확실성이 높다. 이에 따라 본 연구에서는 앙상블 머신러닝 기반 수집된 위성 강수 자료들을 관측 자료와 병합하여 보정된 준실시간 강수량 자료를 생성하고자 한다. 모형의 입력에는 시단위 3가지 준실시간 위성 강수 자료(GSMaP_NRT, IMERG_Early, PERSIANN_CCS)와 방재기상관측 (AWS)의 온도, 습도, 강수량 지점 자료를 활용하였다. 지점 강수 자료의 경우 결측치를 고려하여 475개 관측소를 선정하였으며, 공간성을 고려한 랜덤 샘플링으로 375개소(약 80%)는 훈련 자료, 나머지 100개소(약 20%)는 검증 자료로 분리하였다. 모형의 정량적 평가 지표로는 KGE, MAE, RMSE이 사용되었으며, 정성적 평가 지표로 강수 분할표에 따라 POD, SR, BS 그리고 CSI를 사용하였다. 머신러닝 모형은 개별 원시 위성 강수 자료 및 IDW 기법보다 높은 정확도로 강수량을 추정하였으며 공간적으로 안정적인 결과를 나타내었다. 다만, 최대 강수량에서는 다소 과소추정되므로 이는 강수와 관련된 입력 변수의 개수 업데이트로 해결할 수 있을 것으로 판단된다. 따라서 불확실성이 높은 개별 준실시간 위성 자료들을 관측 자료와 병합하여 보정된 최적 강수 자료를 생성하는 머신러닝 기법은 돌발성 수재해에 실시간으로 대응 가능하며 홍수 예보에 신뢰도 높은 정량적인 강수량 추정치를 제공할 수 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.71-76
• /
• 2009

The research to predict the resistance performance of the ship using the CFD analysis is increasing. For the CFD numerical analysis the computational mesh, which is proper to computational model, has to be made before the analysis is begun. In the parametric study, even though the deformation of each case is not very sharp, the whole computational mesh should be regenerated according to the conventional way. Hence, lots of effort is needed to repeated mesh generation work. To solve these problems, the automatic mesh generation method using the macro function of commercial CAD program and mesh generation program is introduced in this study. First, in the CAD program, by using the macro function and putting the deformation rate of bow and stern in lengthwise, the repeated modeling work is performed automatically. Next, the generated geometries are read by the mesh generation program and the proper mesh for the geometry is created automatically also using the macro function. The hybrid mesh which has unstructured grid near the bow and stern and structured grid in the remaining part of domain is used. The verification of the developed method is done by applying the method to predict the resistance performance of the podded propulsion cruise ship of the Daewoo Shipbuilding & Marine Engineering (DSME) in the cases of different length of bow and stern and pod set in different position. The author believes that the introduced method can help to make the database to optimize the resistance performance of the ship in various cases can be constructed without difficulty.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.227-229
• /
• 2011

To develop an effective web site, Ajax, jQuery and various techniques have been developed. Administrator interface to powerful, where the administrator can easily create a variety of functions from the menu, but this is not leaving the form of text or code, modify it and then when is low. To solve these problems, in this paper we are making conjunction with CSS which provide the database with open font and CSS features in variety of images, converted into text using the open font, these existing production methods with a Web site that provides a differentiated ways.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.109-117
• /
• 2008

In this study, a method predicting the displacement responseof structures from the measured dynamic strain signal is proposed by using a mode decomposition technique. Dynamic loadings including wind and seismic loadings could be exerted to the bridge. In order to examine the bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. Because it may be not easy for the displacement response to be acquired directly on site, an indirect method to predict the displacement response is needed. Thus, as an alternative for predicting the displacement response indirectly, the conversion of the measured strain signal into the displacement response is suggested, while the measured strain signal can be obtained using fiber optic Bragg-grating (FBG) sensors. To overcome such a problem, a mode decomposition technique was used in this study. The measured strain signal is decomposed into each modal component by using the empirical mode decomposition(EMD) as one of mode decomposition techniques. Then, the decomposed strain signals on each modal component are transformed into the modal displacement components. And the corresponding mode shapes can be also estimated by using the proper orthogonal decomposition(POD) from the measured strain signal. Thus, total displacement response could be predicted from combining the modal displacement components.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.05a
• /
• pp.213-221
• /
• 2002

e-비지니스환경에서의 SCM의 성공적인 추진을 위해서는 우선 e-business 전략과 Supply Chain 관리 전략의 상하 연계, 조직측면에 있어서의 경영자의 변화에 대한 혁신 능력과 리더쉽, 조직 구성원들과의 비전 공유, 저보기술(IT)을 활용한 보다 차별화된 서비스가 제공되어야 한다. 본 연구는 C기업의 사례로 통해, 기존의 SCM 기법에서 정보기술(IT)의 급속한 발달과 인터넷의 급속한 보급, 그리고 e-비지니스의 등장으로 인하여 경영환경의 변화라는 새로운 패러다임 하에서 다수의 경쟁기업, 정보 네트워크시스템 기반에서 보다 효과적으로 기업과 고객에게 대응하기 위한 기업의 구체적이고 실무적인 전략 측면에서 다루어 보았다는 데 그 의의가 있다. 소비재, 생활용품에 있어서 보다 빠른 납기, 보다 전문적이고 다양화되고 있는 고객의 욕구를 충족시키기 위해 제조기업 측면에서 어떻게 기존의 조직구조 및 업무 프로세스를 혁신 할 것인가를 실제 사례를 통하여 연구함으로써 동종 산업체나 또는 기업의 실무자들에게 있어 큰 도움이 될 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1269-1276
• /
• 2015

The methodology of utilizing Intensity-Duration-flood Quantity (IDQ) curve for flood alert and warning was introduced and its performance was evaluated. For this purpose the lumped parameter model was calibrated and validated for gauged basin data set and the index precipitation equivalent to alert and warning flood was estimated. The index precipitation and IDQ curves associated by three different Antecedant Moisture Conditions (AMCs) are made provision for various possible flood scenarios. The test basin is Wonju-cheon basin ($94.4km^2$) located in Gangwon province, Korea. The IDQ curves corresponding to alert (50% of design flood level) and warning (70% of design flood level) level was estimated using the Clark unit hydrograph based lumped parameter model. The performance evaluation showed 0.704 of POD (Probability of Detection), 0.136 of FAR (False Alarm Ratio), and 0.633 of CSI (Critical Success Index), which is improved from the result of IDQ with single fixed AMC.

• Journal of the Korean earth science society
• /
• v.39 no.2
• /
• pp.131-138
• /
• 2018

The purpose of this study is to improve the quantitative precipitation estimation method based on satellite brightness temperature. The non-linear equation for rainfall estimation is improved by analysing precipitation cases around the Korean peninsula in summer. Radar reflectivity is adopted the CAPPI 1.5 and CMAX composite fields that provided by the Korea Meteorological Agency (KMA). In addition, the satellite data are used infrared, water vapor and visible channel measured from meteorological imager sensor mounted on the Chollian satellite. The improved algorithm is compared with the results of the A-E method and CRR analytic function. POD, FAR and CSI are 0.67, 0.76 and 0.21, respectively. The MAE and RMSE are 2.49 and 6.18 mm/h. As the quantitative error was reduced in comparison to A-E and qualitative accuracy increased in compare with CRR, the disadvantage of both algorithms are complemented. The method of estimating precipitation through a relational expression can be used for short-term forecasting because of allowing precipitation estimation in a short time without going through complicated algorithms.