• 대한족부족관절학회지
• /
• 제7권2호
• /
• pp.151-156
• /
• 2003

Purpose: Proximal crescentic metatarsal osteotomy(PMO) is one of the most common procedures for correcting moderate to severe degree hallux valgus deformity. Although screw fixation is used for osteotomy site stability, loss of reduction can occur. The purpose of this study is to compare the sagittal plane stability of the conventional crescentic PMO fixed with a single screw with that of the crescentic PMO fixed with 1 screw and 2 supplemental K -wires. Material and Methods: Ten matched pairs of cadaveric foot specimens were used for the proximal crescentic metatarsal osteotomy. For one foot specimen of each pair, crescentic osteotomy was fixed with 4mm long threaded cannulated screw, while the matched pair was prepared by adding two axial 1.6mm K-wires to the conventionally fixed 4mm screw. The extensometer was used to measure the osteotomy gap as the metatarsal head was loaded continuously until failure using a servohydraulic MTS Mini Bionix test frame. The strength of fixation was normalized with the bone mineral density (BMD) of the paired specimen $(N{\times}cm^{2}/gm)$, Result: The average strength of the crescentic PMO with axial K-wire fixation ($458.8cm^{2}/gm$, S.D. 434.3) was significantly higher than the standard crescentic PMO ($367.5cm^{2}/gm$, S.D. 397,9) (p=0.05). Conclusion: Supplemental fixation with two axial K-wires can be added to the crescentic PMO to enhance the initial fixation stability to prevent the loss of reduction or dorsal malunion.

• Journal of East Asia Management
• /
• 제4권1호
• /
• pp.53-77
• /
• 2023

Modern company faces an uncertain future and a competitive environment and are seeking new technologies and creative products to ensure the corporate growth and survival in the market through continuous innovation. "University Industry Cooperation(UIC)" is a point of contact for overcoming the crisis faced by companies and universities in this era and a cooperation platform for mutual prosperity. As a subsidiary of a university, "Technology Holding Company(THC)" is attracting attention as a new window for UIC in Korea. The role of THC is to establish and foster the business opportunities of their subsidiaries and to return investment profits to the university ecosystem again. But recently, the life cycle of technology is getting shorter, and the development cost is steadily increasing. In particular, with the increase of hybrid projects based on convergence and combination, the risk of conducting research(R&D) and new product development(NPD) projects is gradually increasing. A PMO refers to a project management organization that can contribute to improving the success rate of projects with increasing uncertainty by supporting project visibility and appropriate decision-making. The purpose of this study is to raise a research question on whether THC's corporate performance can be improved when "Project Management System(PMO Service)" is introduced into the subsidiary incubation system of THC. This study proposes several research methods to identify the relationship between the introduction of PMO and the corporate performance of THC.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.56-59
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.913-914
• /
• 2008

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.431-437
• /
• 2010

A stack of gradient-index (GRIN) rod lenses cannot be used for coherent anti-Stokes Raman scattering (CARS) microendoscopy for insertion to internal organs through a surgical keyhole with minimal invasiveness. That's because GRIN lens has large amount of inherent chromatic aberrations in spite of absolutely requiring a common focus for pump and Stokes beam with each frequency of ${\omega}_p$ and ${\omega}_S$. For this endoscopic purpose, we need to develop a long slender probe-type objective, namely probe-type microscope objective (PMO). In this paper, we introduce the structure, the working principle, and the design techniques of PMO which is composed of a probe-type lens module (PLM) and an adaptor lens module (ALM). PLM is first designed for a long slender type and ALM is successively designed by using several design parameters from PLM for eliminating optical discords between scanning unit and PLM. A combined module is optimized again to eliminate some coupling disparities between PLM and ALM for the best PMO. As a result, we can obtain a long slender PMO with perfectly diffraction-limited performance for pump beam of 817 nm and Stokes beam of 1064 nm.

• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.70-79
• /
• 2024

This paper describes the results of the development of the the unmanned aerial vehicle system integration laboratory(UAV SIL) for the integrated verification. This UAV SIL is designed to test the robustness of the UAV system including the operational logics and the flight control system behaviors under many abnormal and emergency conditions such as data-link losses, airborne subsystem failures, engine shut down conditions, and ground control station faults. This paper presents how to build the UAV SIL and how to verify the in-development UAV system through the UAV SIL.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.126-131
• /
• 2014

This paper is concerned with a track management method for a naval combat system which receives the tracks information from multi-sensors and multi-tactical datalinks. Since the track management of processing the track information from diverse sources can be formulated as a data fusion problem, this paper will deal with the data fusion architecture, track association and track information determination algorithm for the track management of naval combat systems.

• 대한화학회지
• /
• 제34권2호
• /
• pp.136-142
• /
• 1990

탄화수소류에 대해서 PMO (Pertubation Molecular Orbital) 방법으로 NBMO (Nonbonding Molecular Orbital) 계수를 구하여 안정화에너지 ${\delta}E$를 계산하였다. 그 결과 ${\delta}E$값은 라디칼 반응의 활성화에너지, 결합해리에너지 및 방사선 조사시 생성되는 생성물의 생성확률(G 값)과 좋은 상관성을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.948-952
• /
• 2001

Periodic mesoporous organosilicas with rope-based morphology from a reaction gel composition of 1 BTME : 0.57 ODTMABr : 2.36 NaOH : 353 H2O were synthesized. While long rope-shaped product dominated in case of static synthesis condition , gyroid type products instead of rope shaped product appeared and rope shaped product disappeared with agitation. PMO with such a long rope shaped morphology is firstly reported. Additionally, various rope-based morphologies depending on the degree of bending, twisting, folding and winding of rope such as spirals, discoids, toroids, and worm-like aggregates were observed. White powdered products were characterized by X-ray diffraction, N2 sorption measurement, SEM and TEM. From XRD pattern and TEM image, ODTMA-PMO with hexagonal symmetry was identified. The pore diameter and BET surface area of ODTMA-PMO are $32.9{\AA}$ and 799 m2g-1 , respectively. Hexagonally arrayed channels run with long axis of rope and rope-based shapes with various degree of curvature, which was elucidated by using TEM images.

• 한국버섯학회지
• /
• 제2권4호
• /
• pp.169-174
• /
• 2004

국내에서 재배되고 있는 약용버섯인 상황(P. baumii) 자실체의 열수 추출물로 부터 건강 기능성 식품 및 의약품개발의 기초자료를 제공하고자 항암실험 및 면역효과에 대한 실험을 수행하였다. 본 연구에서 사용한 PMO-P4의 경우 rDNA의 ITS부위의 염기서열 분석을 통한 계통분석결과 P. baumii로 판명 되었으며, PMO-P4 자실체로부터 열수 추출한 성분(HWE-P4)을 160mg/kg/day의 농도로 하여 Sarcoma-180 암세포를 유발한 마우스에 경구투여한 결과 A군의 경우, 종양억제효과는 35.3%로 대조군보다 유의성 있게 감소하였으며(p<0.05), 생명연장 효과는 156%증가한 것으로 나타났다. 시료의 경구투여 방법에 있어서도 시료를 먼저 2주간 투여한 후 암세포를 접종한 A군의 경우가 시료 투여와 암세포 접종을 동시에 실시한 B군의 경우 보다 종양억제효과 및 생명연장효과가 높았음을 알 수 있었다. A군의 경우 대조군에 비하여 CD4/CD8의 비율이 71.4%증가 하였으며, CD25(IL-2receptor chain)분자의 발현을 5배정도 증가시키는 것으로 관찰되었다. 이러한 결과로 보아 P. baumii로 밝혀진 PMO-P4 자실체로부터 열수 추출한 성분의 항암효과는 암세포를 직접 공격하여 항암효과를 나타내기 보다는 T cell등의 면역세포를 활성화시킴으로써 암세포를 억제 혹은 사멸시키는 것으로 생각된다.