• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.207-216
• /
• 2009

Friction tests were carried out in order to investigate the effects of temperature on the friction and wear behaviors between a PMMA film and a fused silica lens using a microtribometer. The friction forces on the PMMA film were measured under atmospheric condition as the temperature of the film was increased from 300 K to 443 K. The contact area between the film and the lens was observed. The tribological characteristics of the film were significantly changed as the temperature increased. The changes were discussed with the change of the film state from glassy to viscous flow. In addition, the results showed that the friction behavior can be varied with the thermal history of the PMMA film. Residual solvent in the PMMA film could emerge to the PMMA surface due to an additional heating and the solvent on the film surface decreased the friction force.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1511-1512
• /
• 2011

마이크로 렌즈를 제작하기 위해 PMMA 몰드를 PMMA 용액을 MEMS 기술을 이용하여 제작한 실리콘 마이크로 홀 어레이에 PMMA 용액을 스핀 코팅하여 제작하였다. PMMA 몰드에 PDMS 용액을 코팅하여 OLED 광추출 향상용 마이크로 렌즈를 제작하였다.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.36-42
• /
• 2015

The aspherical lens was designed to be able to array a focal point. For this reason, it has very curved surface. The aspherical lens is fabricated by injection molding or diamond turning machine. With the aspherical lens, tool marks and surface roughness affect the optical characteristics, such as transmissivity. However, it is difficult to polish free form surface shapes uniformly with conventional methods. Therefore, in this paper, the ultra-precision polishing method with MR fluid was used to polish an aspherical lens with 4-axis position control systems. A Tool path and polishing mechanism were developed to polish the aspherical lens shape. An MR polishing experiment was performed using a generated tool path with a PMMA aspherical lens after the turning process. As a result, surface roughness was improved from $R_a=40.99nm$, $R_{max}=357.1nm$ to $R_a=4.54nm$, $R_{max}=35.72nm$. Finally, the MR polishing system can be applied to the finishing process of fabrication of the aspherical lens.

• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.42-47
• /
• 1998

현재의 전자빔 묘화의 한계를 극복할 수 있는 마이크로 전자빔 시스템의 전자 광학 렌즈를 제작하였고 전자빔 묘화실험을 통하여 이를 검증하였다. 마이크로머시닝기술을 이용하여 실리콘 전극을 제작하고 이를 양극 접합을 통해 조립하여 다층 전극의 전자 광학 렌즈를 제작하였다. 완성된 전자 광학 소자를 초고진공 챔버에 장착하여, STM(Scanning Tunneling Microscope) 팁에서 방출된 전자빔의 focusing 특성을 관찰하였으며 전자를 집속하여 리소그라피를 수행하였다. E-beam 감광막은 PMMA(Poly-methylmethacrylate)를 사용하였고 0.13㎛의 패턴을 형성시킬 수 있었다.

• ETRI Journal
• /
• 제18권3호
• /
• pp.195-206
• /
• 1996

Molecular conformations of stereoregular poly(methyl methacrylate) (PMMA) monolayers have been investigated by scanning probe microscopes. Isotactic and syndiotactic PMMAs were found to have right and left hand helical structures, respectively. On the contrary atactic PMMA showed rather random arrangement of the chains. It has been demonstrated that the PMMA Langmuir-Blodgett (LB) films can be utilized to form nanoscale patterns down to 50 nm and to forma geodesic lens. It has also been manifested that the quantum efficiency of a polymer electroluminescent device can be significantly enhanced by inserting the PMMA LB films between the emitting layer and the cathode. All the applications utilize the unique characteristics of the LB films to form thin and uniform films in the molecular level.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.92-99
• /
• 2014

An aspherical lens, which resolves several problems with a spherical lens,typically serves asa key part of an optical system. Generally, an aspherical lens is fabricated using a diamond turning machine or by mean of injection molding. However, residual stress and/or tool marks can arise when using a commercial fabricating method such as DTM or injection molding. A polishing process, thus, is commonly used to obtain a high-precision aspherical lens. In this study, a polishing method using MR fluid was applied to minimize several problems, in this case residual stress and the creation of tool marks, during the cutting process. The MR polishing system was developed to polish aspherical lenses. A series of experiments were performed to obtain a very fine surface roughness. PMMA (the lens material for molding) was used as a workpiece, and the gap size, magnetic field intensity, wheel speed and feed rate were selected as the parameters in this study. Finally, a very fine surface roughness of Ra=2.12nm was obtained after MR polishing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.184-187
• /
• 2005

This paper is described about the technique of ultra-precision machining for optical parts in HMD system. Machining technique for PMMA and BK7 with single point diamond turning machining is reported in this paper. The main factors influencing on the machined surface quality are discovered and regularities of machining process are drawn. The purpose of our research is to find the optimum machining conditions fur cutting of PMMA and grinding of BK7. Also, apply the SPDTM technique to the manufacturing of ultra precision optical components of HMD system. Aspheric PMMA lens without a polishing process, the surface roughness of 5 nm Ra, and the form error of ${\lambda}/2\;({\lambda}=632.8nm)$ for reference curved surface 30 mm has been required.

• 한국안광학회지
• /
• 제1권1호
• /
• pp.65-72
• /
• 1996

플라스틱 안경렌즈의 소재에 관한 일반적인 특성을, 광학적 특성과 polymer의 구조관련시켜 설명함으로써 그 본질적인 부분에 대한 해설을 하였다. PMMA의 경우 ${\delta}$ 전자에 기반을 둔 1중결합에 의해 폴리머의 골격이 유지되고 이들에 의한 빛의 흡수현상은 매우 적은 것이었다, 폴리머의 굴절율은 주로 분자굴절, 분극율에 의해 지배되었고, Cl, Br, I 같은 할로겐기나 벤젠고리를 함유한 경우 굴절율이 높았다. 굴절율의 온도의존성은 무기그라스보다 환경의존성은 컸고, 폴리머내에서의 산란은 결정영역의 불균일한 분포와 관계가 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.743-746
• /
• 2000

Plastic microlenses play an important role in reducing the size, weight, and the cost of the systems in the fields of optical data storage and optical communication. In the present study, plastic microlens arrays were fabricated using micro-compression molding process. The design and fabrication procedures for mold insert were simplified by using silicon instead of metal. A simple but effective micro compression molding process, which uses polymer powder, were developed for microlens fabrication. The governing process parameters were temperature and pressure histories and the micromolding process was controlled such that the various defects developing during molding process were minimized. The radius and magnification ratio of the fabricated microlens were $125{\mu}m$ and over 3.0, respectively.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1242-1245
• /
• 2001

Plastic microlenses play an important role in reducing the size, weight, and the cost of the systems in the fields of optical data storage and optical communication. In the present study, plastic microlens arrays were fabricated using micro-compression molding process. The design and fabrication procedures for mold insert were simplified by using silicon instead of metal. A simple but effective micro compression molding process, which uses polymer powder, were developed for microlens fabrication. The governing process parameters were temperature and pressure histories and the micromolding process was controlled such that the various defects developing during molding process were minimized. The radius and magnification ratio of the fabricated microlens were 125$\mu\textrm{m}$ and over 3.0, respectively.