• 한국환경보건학회지
• /
• 제35권3호
• /
• pp.226-234
• /
• 2009

The main objective of this study was to evaluate the effects on shape and size, compressive strength, water absorption and heavy metals leaching with various weight mixing ratios in waste ash brick products using waste recycling MSWI(Municipal Solid Waste Incinerator) bottom ash, steel slag and waste building material. The manufacturing processes for the waste ash brick consist of screening, mixing, conveyor transmission, compaction.forming, and curing steps of raw materials. The weight mixing ratios of steel slag around bottom ash were adjusted within the ranges of 10% to 30%. The reported results show that the width and thickness of the manufactured waste ash brick could be satisfied with $90{\pm}2mm\;and\;57{\pm}2mm$, respectively which are K.S. standards of products qualities. And in case of length, only 20-Ba50Ss30, 20-Ba60Wb20 and 20-Ba50Wb30 for the mixing ratios could be satisfied with $190{\pm}2mm$ that is K.S. standards of products quality. The compressive strength and water absorption for 20-Ba50Ss30 and 20-Ba70Wb10 were over $8N/mm^2$ and below 15% respectively that are K.S. standards of manufactured waste ash brick. The results of tests for the heavy metals leaching in the all manufactured waste ash bricks are also passed to the wastes management regulations. The cost analysis of 20-Ba50Ss30 is evaluated. The manufacturing cost is evaluated 34.3 won/brick with 8 hours and 20tons of raw material per day. Incinerators with problems in bottom ash disposal can therefore derive significant benefits from the application of waste ash brick production.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.31-37
• /
• 2015

A laser line welder using a solid-state laser (Yb:YAG) has been manufactured for joining ultra-thin cold-rolled steel coils in steelworks. The coils to be welded primarily range from 0.15 to 0.3 mm in thickness and 800 to 1,100 mm in width. Because the steel plate is extremely thin, it is very important to control the stop positions of the clamp at cutting and welding points. In this study, both hydraulic proportional control valves and LVDT sensor embedded cylinders were used to precisely control and monitor the positions of clamps with complementary stoppers. As a result, the positions could be controlled within an error of ${\pm}30{\mu}m$. Erichsen cupping tests on the welded joints show that the Erichsen index ranges from 4.4 to 4.6 mm. Furthermore, the tensile strength of welding points is comparable to that of the base metal.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.568-569
• /
• 2006

The use of the nickel free, high nitrogen stainless steel powder and nitriding during sintering of iron based materials have been shown as an alternative way to the conventional PM stainless steels containing nickel. Nitrogen as an alloying element for iron improves in an effective way the properties of sintered alloyed steels. The powder metallurgy route is a suitable way to introduce nitrogen into these alloys and, in particular, to produce high nitrogen (close to the solubility limit) stainless steels. The paper presents and discusses the nitriding behavior of nickel-free stainless steels produced by powder metallurgy method. Alloyed melt was atomized by nitrogen and in this way nitrogen was introduced into the powder. Further nitriding occurred during sintering in a nitrogen atmosphere. For comparison, compacts having the same composition as an alloyed powder were produced from elemental powders mixture. Sintering-nitriding behaviour of investigated materials has been controlled by dilatometry, chemical and X-Ray phase analysis and metallography. Mechanical properties of sintered compacts were also measured.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.303-306
• /
• 2002

P/M high speed steels with various Co contents were fabricated by gas atomization and Canning/HIP process. As Co content in P/M high speed steel increased, hardness, transverse rupture strength and yield strength in compressive testing increased due to solid solution hardening of Co in matrix. Especially, PM high speed steels with Co have high deformation resistance to repeated compressive loading.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.611-633
• /
• 1995

The pupose of this study was to compare the fracture strength of five kinds of all-ceramic crowns(Vintage, Dicor Empress-staining, Empress-layering, In-Ceram) luted with glass ionomer cerment and composite resin cement and to evaluate the effect of cements on the fracture stregth of all ceramic crowns. Five groups of twelve uniform sized all-ceramic crown specimens were fabricated. Six specimens of each group were cemented with glass ionomer cement(Fuji G.I. Cement) and the remaining six specimens of each group were etched, silane-treated, and cemented with composite resin cement(Bistite resin cement). The crowns were stored in water$(37^{\circ}C)$ for 1 day prior to loading in an Instron, using a steel ball(diameter 4mm) at a crosshead speed of 0.5mm/min. The crowns were angled $30^{\circ}$, so the steel ball contacted with the crowns 2mm lingual from the mid-incisal edge. The results obtained were summarized as follows ; 1. With G.I. cement, mean fracture load(Kg) Were : Intage : $18.33{\pm}1.47$ ; Empress-staining : $23.92{\pm}6.67$ ; Dicor : $24.0{\pm}5.81$ ; Empress-layering : $26.92{\pm}2.80$ ; In-Ceram : $51.58{\pm}6.87$ ; ANOVA revealed a significant difference existed(p<0.05) between the group A(Vintage, Dicor, Empress-staining, Empress-layering) and group B(In-Ceram). 2. With Resin cement, mean fracture load(Kg) were : Intage : $22.75{\pm}4.97$ ; Dicor : $42.75{\pm}7.07$ ; Empress-staining : $44.08{\pm}7.99$ ; Empresslayering : $50.42{\pm}5.43$ ; In-Ceram : $52.58{\pm}6.51$ ; ANOVA revealed a significatnt difference existed(p<0.05) between the group A(Vintage) and B(Dicor, Empress-staining Empress-alyering, In-Ceram). 3. Resin cement significantly increased the fracture strength of the all-ceramic crowns for Dicor(156%), Empress-staining(185%), Empress-alyering(187%)(p<0.05); but did not increase the fracture strength of Vintage(128%) and In-Ceram(101%)(p>0.05). 4. Majority of the all-ceramic crowns show a wedge fracture extending through proximal surfaces to an apex, usually apical third(with G.I. cement) or middle third(with Resin cement) of the facial surface.

• 한국축산식품학회지
• /
• 제32권2호
• /
• pp.204-211
• /
• 2012

본 연구에서는 Arcobacter spp. 중 사람에게 위장염을 가장 빈번하게 일으키며 전 세계적으로 식육에 가장 많이 오염되어 있는 A. butzleri에 대해 자외선과 에탄올의 살균 효과를 확인하고자 하였다. $3{\times}3cm^2$ 크기의 스테인리스스틸 표면과 돈육 샘플에 각각 8 ${\log}_{10}CFU$/mL의 A. butzleri를 $200{\mu}L$씩 접종한 후 254 nm 선량으로 108-648 mWs/$cm^2$의 자외선을 조사하였다. 또한 10, 35, 70%의 에탄올에 broth 상태의 A. butzleri와 A. butzleri를 접종한 돈육을 10-30분 간 침지시키거나 에어로졸 상태로 분무 시켰다. 스테인리스스틸 표면의 A. butzleri에 자외선 조사 시 A. butzleri는 모든 자외선 선량에서 유의적으로 감소하였으나 돈육에 오염된 A. butzleri는 유의적 차이가 없거나 감소율이 매우 적은 것으로 나타났다(최고 감소량 $0.92{\pm}0.62-1.29{\pm}0.34\;{\log}_{10}CFU$/mL). 또한 broth 상태의 A. butzleri에 에탄올을 처리했을 경우 모든 농도의 에탄올에서 A. butzleri가 유의적으로 감소하였으나 식육에 오염 된 A. butzleri는 유의적인 차이가 없거나 감소율이 매우 낮은 것으로 나타났다(10% 에탄올의 최고 감소량은 $0.16{\pm}0.42-0.77{\pm}0.65\;{\log}_{10}CFU$/mL, 35% 에탄올은 $0.59{\pm}0.38-1.52{\pm}0.60\;{\log}_{10}CFU$/mL, 70% 에탄올은 $1.33{\pm}0.43-2.83{\pm}0.52\;{\log}_{10}CFU$/mL).

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2719-2726
• /
• 2010

본 연구는 포항지역 환경오염물질의 보건 환경 위해성 평가를 위한 기초연구의 일환이며, 이를 위하여 포항시에 소재한 지역대기자동측정 자료를 이용하여 연별, 계절별 $PM_10$ 농도분포에 대한 현황, 기상특성 및 오염물질 농도분포 분석을 수행하였고, 대기확산 모델(CALPUFF)을 이용하여 농도분포 특성에 대해 정성적, 정량적으로 확인하였다. 포항지역의 $PM_10$ 농도분포를 확인한 결과, 포항지역의 계절별 $PM_10$ 평균농도는 봄($75.7{\mu}g/m^3$)>여름($56.8{\mu}g/m^3$)>겨울($53.6{\mu}g/m^3$) >가을($52.7{\mu}g/m^3$) 순으로 봄에는 빈번히 발생하는 황사의 영향으로 높은 농도를 나타내었다. 포항지역 오염원별 $PM_10$ 배출량은 점오염원 62%>이동오염원 33%>면오염원 5% 순이며, 점오염원 중 전체 97%가 철강산업인 제철제강업에서 발생되었다. 포항지역은 $PM_10$의 영향을 많이 받고 있는 지역으로 포항철강공단지역에 대한 환경오염물질 원인배출원에 대한 감시체계의 보완 및 집중관리와 함께 포항지역 주민의 건강 보호를 위하여 보건 및 환경에 악영향을 미치는 위해인자 및 오염물질을 원천적으로 차단하는 작업이 지속적으로 수행되어야 할 시점이다.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1467-1473
• /
• 2013

건설 프로젝트에서 각 전문분야의 작업은 해당 분야의 전문 소프트웨어에 의해 진행되므로 이를 통해 생성된 디지털 정보의 교환 및 공유가 업무 효율 향상을 위해 중요한 요소로 부각되고 있다. 이에 본 연구에서는 강구조건물 골조의 구조설계에서 발생하는 정보전달 요구를 IDM 방법론을 이용해 분석하였다. 강구조 골조 구조설계 과정의 단위업무를 설계단계별로 분석하고, 단위업무 사이에서 요구되는 정보를 도출하여 PM, ER 및 FP를 추출하였다. 이를 통해 강구조 골조 구조설계의 상세설계단계에서 구조적으로 중요한 비중을 차지하는 강구조 볼트접합 및 용접접합의 구조정보를 분석하고 이를 Pset으로 추가하여 새로운 ER과 FP로 제안하였다. 제안한 볼트접합 및 용접접합 ER과 FP를 강구조 표준접합상세의 기둥-보 강축접합 사례에 적용한 결과, 철골접합부 구조설계정보의 저장 및 IFC 파일을 통한 공유 및 교환에 유용하게 활용할 수 있음을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제7권3호
• /
• pp.257-263
• /
• 2015

PURPOSE. In this study, we aimed to evaluate the amount of marginal gap with two different substructure materials using identical margin preparations. MATERIALS AND METHODS. Twenty stainless steel models with a chamfer were prepared with a CNC device. Marginal gap measurements of the galvano copings on these stainless steel models and Co-Cr copings obtained by a laser-sintering method were made with a stereomicroscope device before and after the cementation process and surface properties were evaluated by scanning electron microscopy (SEM). A dependent t-test was used to compare the mean of the two groups for normally distributed data, and two-way variance analysis was used for more than two data sets. Pearson's correlation analysis was also performed to assess relationships between variables. RESULTS. According to the results obtained, the marginal gap in the galvano copings before cementation was measured as, on average, $24.47{\pm}5.82{\mu}m$ before and $35.11{\pm}6.52{\mu}m$ after cementation; in the laser-sintered Co-Cr structure, it was, on average, $60.45{\pm}8.87{\mu}m$ before and $69.33{\pm}9.03{\mu}m$ after cementation. A highly significant difference (P<.001) was found in marginal gap measurements of galvano copings and a significant difference (P<.05) was found in marginal gap measurements of the laser-sintered Co-Cr copings. According to the SEM examination, surface properties of laser sintered Co-Cr copings showed rougher structure than galvano copings. The galvano copings showed a very smooth surface. CONCLUSION. Marginal gaps values of both groups before and after cementation were within the clinically acceptable level. The smallest marginal gaps occurred with the use of galvano copings.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.115-120
• /
• 2014

PURPOSE. The aim of this in vitro study was to evaluate the effect of aging on the tear strength and cytotoxicity of four soft denture lining materials. MATERIALS AND METHODS. Four commonly used soft denture lining materials, (Coe-Comfort$^{TM}$ GC America Inc., Alsip, IL, USA; Coe-SOFT$^{TM}$ GC America Inc., Alsip, IL, USA; Visco-gel Dentsply Caulk Milford, DE, USA; and Sofreliner Tough M Tokuyama Dental Corporation Tokyo, Japan) were selected. Sixty trouser-leg designed specimens per lining material were fabricated using a stainless steel mold for tear strength testing. The specimens were divided into non-thermocycling and 1000-, and 3000-thermocycling groups. For the cytotoxicity test, twenty-four disk shaped specimens per material were fabricated using a stainless steel mold. The specimens were soaked in normal saline solution for 24 h, 48 h and 72 h. Cytotoxicity was measured by XTT assay in L929 mouse fibroblasts. Data were analyzed by two way analysis of variance and Dunnett's test (P<.05). RESULTS. Before thermocycling, Sofreliner Tough M ($10.36{\pm}1.00N$) had the highest tear strength value while Coe-Comfort$^{TM}$ ($0.46{\pm}0.10N$) had the lowest. After 3000 cycles, Sofreliner Tough M ($9.65{\pm}1.66N$) presented the highest value and Coe-Comfort$^{TM}$ ($0.42{\pm}0.08N$) the lowest. Sofreliner Tough M, in all incubation periods was the least toxic with significant differences compared to all other materials (P<.05). Coe-Comfort$^{TM}$, Coe-$SOFT^{TM}$, and Sofreliner Tough M did not show any significant differences within their material group for all incubation periods. CONCLUSION. This in vitro study revealed that aging can affect both the tear strength and cytotoxicity of soft denture materials depending on the composition.