• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.328-332
• /
• 2012

The work function of Ag (silver) is too low (~4.3 eV) to be used as an electrode of T-OLED (Top Emission Organic Light Emitting Diode). To solve this weakness, researches used plasma-, UV-, or thermal treatment on Ag films in order to increase the work function (~5.0 eV). So, most of studies have focused only on the work function of various treated Ag films, but studies focusing on nanomechanical properties were very important to investigate the efficiency and life time of T-OLED etc. In this paper, we focused on the mechanical properties of the Ag and $AgO_x$ film. The Ag was deposited on a glass substrate with the thickness of 150 nm by using rf-magnetron sputter with the power was fixed at 100 W and working pressure was 3 mTorr. The deposited Ag film was UV treated by UV lamp for several minutes (0~9 min). We measured the sheet resistance and mechanical property of the deposited film. From the experimental result, there were some differences of the sheet resistance and surface hardness of Ag thin film between short time (0~3 min) and long time UV treatment. These result presumed that the induced stress was taken place by the surface oxidation after UV treatment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.609-615
• /
• 2012

In LSP (laser shock peening) treatment, the laser source geometries when the laser beam strikes the metal target area are diverse. The laser spot geometry affects the residual stress field beneath the treated surface of the metallic materials, which determines the characteristics of the pressure pulse. In this paper, detailed finite-element (FE) simulations on laser shock peening have been conducted in order to predict the magnitude and of the residual stresses and the depth affected in Inconel alloy 600 steel. The residual stress results are compared for circular, rectangular, and elliptical laser spot geometries. It is found that a circular spot can produce the maximum compressive residual stresses near the surface but generates tensile residual stresses at the center of the laser spot. In the depth direction, an elliptical laser spot produces the maximum compressive residual stresses. Circular and elliptical spots plastically affect the alloy to higher depths than a rectangular spot.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.149-149
• /
• 2016

투명전극인 Indium Tin Oxide (ITO)는 높은 투과도와 낮은 면저항을 가지지만 brittle한 성질로 유연성이 떨어져 플렉서블한 디바이스에 적용하기에는 어려움이 있다. 이를 해결하기 위해서 ITO를 대체할 수 있는 CNT, Graphene, AgNW, 전도성 고분자 투명전극이 연구되어지고 있다. 투명전극 중에서도 AgNW는 용액공정으로 제조 단가가 비교적 저렴하며, 높은 투과도와 전기전도 특성을 가지는 투명전극으로 주목받고 있는 차세대 투명전극이다. AgNW는 나노와이어가 네트워크를 형성하고 있어 높은 전도성과 광 투과도를 가지지만 내열성이 좋지 않아 $200^{\circ}C$ 이상의 온도에서 손상된다. 또한 흡습성의 고분자 물질로 둘러싸여 있기 때문에 내환경성이 좋지 않다는 단점이 있다. 이를 해결하기 위해 본 연구에서는 AgNW전극에 플라즈마 처리를 통해서 $250^{\circ}C$ 까지 내열성을 향상시킬 수 있었으며 추가적으로 Overlayer를 형성하여 $300^{\circ}C$까지 열적 안전성을 확보하여 내열성을 향상시켰다. 습도 85%, 온도 $85^{\circ}C$에서 36일간 환경안정성테스트 결과, 기존 AgNW 전극은 저항이 164% 증가한 것에 비해 플라즈마 처리후 Overlayer를 형성한 AgNW는 49% 저항증가로 저항증가율이 3배 이상 감소하여 환경안정성이 향상된 것을 확인하였다. 이는 흡습성 고분자 물질이 플라즈마 처리에 의해 제거되고 Overlayer가 보호막 역할을 하여 산소와 반응하지 않았기 때문으로 판단된다. 플라즈마 처리와 Overlayer를 형성한 AgNW 전극을 적용하여 투명히터를 제작한 결과 유연 기판상 투명히터로 활용이 가능함을 확인하였고 내열성이 향상되어 높은 전압에서도 안정적인 구동을 보였다. 이를 투명히터 뿐만 아니라 다양한 디바이스에 적용한다면 보다 높은 효율을 기대할 수 있을 것이라 예상된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.259-259
• /
• 2008

The LTCC (Low Temperature Co-fired Ceramic) technology meets the requirements for high quality microelectronic devices and microsystems application due to a very good electrical and mechanical properties, high reliability and stability as well as possibility of making integrated three dimensional microstructures. The wet process, which has been applied to the etching of the metallic thin film on the ceramic substrate, has multi process steps such as lithography and development and uses very toxic chemicals arising the environmental problems. The other side, Plasma technology like ion beam sputtering is clean process including surface cleaning and treatment, sputtering and etching of semiconductor devices, and environmental cleanup. In this study, metallic multilayer pattern was fabricated by the ion beam etching of Ti/Pd/Cu without the lithography. In the experiment, Alumina and LTCC were used as the substrate and Ti/Pd/Cu metallic multilayer was deposited by the DC-magnetron sputtering system. After the formation of Cu/Ni/Au multilayer pattern made by the photolithography and electroplating process, the Ti/Pd/Cu multilayer was dry-etched by using the low energy-high current ion-beam etching process. Because the electroplated Au layer was the masking barrier of the etching of Ti/Pd/Cu multilayer, the additional lithography was not necessary for the etching process. Xenon ion beam which having the high sputtering yield was irradiated and was used with various ion energy and current. The metallic pattern after the etching was optically examined and analyzed. The rate and phenomenon of the etching on each metallic layer were investigated with the diverse process condition such as ion-beam acceleration energy, current density, and etching time.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2008.05a
• /
• pp.62-64
• /
• 2008

A major hurdle to the development of RNA interference as therapy for HIV infection is the delivery of siRNA to T lymphocytes which are difficult cells to transfect even in vitro. We have employed a single chain antibody to the pan T cell surface antigen CD7 was conjugated to an oligo-9-arginine peptide (scFvCD7-9R) for T cell-specific siRNA delivery in NOD/SCIDIL2${\gamma}$-/- mice reconstituted with human peripheral blood lymphocytes (Hu-PBL). Using a novel delivery, we first show that scFvCD7-9R efficiently delivered CD4 siRNA into human T cells in vitro. In vivo administration to Hu-PBL mice resulted in reduced levels of surface CD4 expression on T cells. Mice infected with HIV-1 and treated on a weekly basis with scFvCD7-9R-siRNA complexes targeting a combination of viral genes and the host coreceptor molecule CCR5 successfully maintained CD4/CD3 T cell ratios up to 4 weeks after infection in contrast to control mice that displayed a marked reduction in CD4 T cell numbers. p24 antigen levels were undetectable in 3 of the 4 protected mice. scFvCD7-9R/antiviral siRNA treatment also helped maintain CD4 T cell numbers with reduced plasma viral loads in Hu-PBL mice reconstituted with PBMC from donors seropositive for HIV, indicating that this method can contain viral replication even in established HIV infections. Our results show that scFvCD7-9R could be further developed as a potential therapeutic for HIV-1 infection.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.45-53
• /
• 2011

We devised a procedure for the recovery of silicon and tempered glass from waste photovoltaic (PV) modules using optimized conditions. The tempered glass was recovered without any damage using organic solvents. The surface material is removed by applying an acid solution on the surface of the PV cell. Through our proposed method, we offer a much more efficient approach for recycling solar cells with a surfactant than the conventional method. This process, we obtained pure silicon with a yield of 90% by chemical treatment with the surfactant at room temperature for 18 min. The silicon yield was characterized using an inductively coupled plasma-atomic emission spectrometer.

• IMMUNE NETWORK
• /
• v.23 no.3
• /
• pp.29.1-29.23
• /
• 2023

Cholesterol (CL) is required for various biomolecular production processes, including those of cell membrane components. Therefore, to meet these needs, CL is converted into various derivatives. Among these derivatives is cholesterol sulfate (CS), a naturally produced CL derivative by the sulfotransferase family 2B1 (SULT2B1), which is widely present in human plasma. CS is involved in cell membrane stabilization, blood clotting, keratinocyte differentiation, and TCR nanocluster deformation. This study shows that treatment of T cells with CS resulted in the decreased surface expression of some surface T-cell proteins and reduced IL-2 release. Furthermore, T cells treated with CS significantly reduced lipid raft contents and membrane CLs. Surprisingly, using the electron microscope, we also observed that CS led to the disruption of T-cell microvilli, releasing small microvilli particles containing TCRs and other microvillar proteins. However, in vivo, T cells with CS showed aberrant migration to high endothelial venules and limited infiltrating splenic T-cell zones compared with the untreated T cells. Additionally, we observed significant alleviation of atopic dermatitis in mice injected with CS in the animal model. Based on these results, we conclude that CS is an immunosuppressive natural lipid that impairs TCR signaling by disrupting microvillar function in T cells, suggesting its usefulness as a therapeutic agent for alleviating T-cell-mediated hypersensitivity and a potential target for treating autoimmune diseases.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.68-74
• /
• 2013

For the coating of diamond films on WC-Co tools, a buffer interlayer is needed because Co catalyzes diamond into graphite. W and Ti were chosen as candidate interlayer materials to prevent the diffusion of Co during diamond deposition. W or Ti interlayer of $1{\mu}m$ thickness was deposited on WC-Co substrate under Ar in a DC magnetron sputter. After seeding treatment of the interlayer-deposited specimens in an ultrasonic bath containing nanometer diamond powders, $2{\mu}m$ thick nanocrystalline diamond (NCD) films were deposited at $600^{\circ}C$ over the metal layers in a 2.45 GHz microwave plasma CVD system. The cross-sectional morphology of films was observed by FESEM. X-ray diffraction and visual Raman spectroscopy were used to confirm the NCD crystal structure. Micro hardness was measured by nano-indenter. The coefficient of friction (COF) was measured by tribology test using ball on disk method. After tribology test, wear tracks were examined by optical microscope and alpha step profiler. Rockwell C indentation test was performed to characterize the adhesion between films and substrate. Ti and W were found good interlayer materials to act as Co diffusion barriers and diamond nucleation layers. The COFs on NCD films with W or Ti interlayer were measured as less than 0.1 whereas that on bare WC-Co was 0.6~1.0. However, W interlayer exhibited better results than Ti in terms of the adhesion to WC-Co substrate and to NCD film. This result is believed to be due to smaller difference in the coefficients of thermal expansion of the related films in the case of W interlayer than Ti one. By varying the thickness of W interlayer as 1, 2, and $4{\mu}m$ with a fixed $2{\mu}m$ thick NCD film, no difference in COF and wear behavior but a significant change in adhesion was observed. It was shown that the thicker the interlayer, the stronger the adhesion. It is suggested that thicker W interlayer is more effective in relieving the residual stress of NCD film during cooling after deposition and results in stronger adhesion.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.609-619
• /
• 2000

Cyclosporin A(CsA) is now widely used to treat organ transplant recipients. But CsA has various short-and long-term side effects. Especially, gingival hyperplasia is not easy to resolve since its nature is still unknown. This study discusses the pathogenesis of CsA-induced gingival hyperplasia on the basis of data obtained from light and electron microscopic studies of biopsis from patients on CsA treatment after kidney transplantation. Light microscopically, the multilayered squamous epithelium showed an irregular surface of parakeratosis and deep invaginations in the subepithelial tissue. At lamina propria, we observed bundles of irregularly arranged collagen fiber, some fibroblasts, numerous capillary vessels and a large diffuse infiltration of plasma cells. Ultrastructurally, many fibroblasts, collagen fibers, collagen fibrils were present in lamina propria. On the basis of the data collected, we propose that the morphological features of the dimensional increase in gingival tissue associated with CsA treatment in kidney transplant patients may be considered proliferative fibroblasts, collagen fibers, collagen fibrils in lamina propria.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.5
• /
• pp.307-311
• /
• 2009

In this study, TiCrN films were deposited on STS 316 Land Si (100) wafer by inductively coupled plasma (ICP) assisted D.C. magnetron sputtering. The effect R.F. power for ICP discharge on the mechanical properties of TiCrN films was investigated. XRD, XPS and FE-SEM were used for the structure analysis. Also the Micro-Knoop hardness tester and profilometer were used for measuring hardness of coatings and film stress respectively. As increasing the R.F. power for ICP discharge, thickness of coating was decreased from 1633 nm to 1288 nm but hardness was increased about $Hk_{5g}$ 4200 at 400 W. All of the XRD patterns showed (111), (200) and (220) peaks of TiCrN films. Surface morphology was studied using the profilometer. FE-SEM was used to know morphology and cross-section of the films. Structure of the films was changed dense as increased ICP power.