• Asian Pacific Journal of Cancer Prevention
• /
• 제14권11호
• /
• pp.6281-6286
• /
• 2013

Background: To further investigate the molecular basis of lung cancer development, we utilize a microarray to identify differentially expressed genes associated with various TNM stages of adenocarcinoma, a subtype with increasing incidence in recent years in China. Methods: A 35K oligo gene array, covering about 25,100 genes, was used to screen differentially expressed genes among 90 tumor samples of lung adenocarcinoma in various TNM stages. To verify the gene array data, three genes (Zimp7, GINS2 and NAG-1) were confirmed by real-time RT-PCR in a different set of samples from the gene array. Results: First, we obtained 640 differentially expressed genes in lung adenocarcinomas compared to the surrounding normal lung tissues. Then, from the 640 candidates we identified 10 differentially expressed genes among different TNM stages (Stage I, II and IIIA), of which Zimp7, GINS2 and NAG-1 genes were first reported to be present at a high level in lung adenocarcinoma. The results of qRT-PCR for the three genes were consistent with those from the gene array. Conclusions: We identified 10 candidate genes associated with different TNM stages in lung adenocarcinoma in the Chinese population, which should provide new insights into the molecular basis underlying the development of lung adenocarcinoma and may offer new targets for the diagnosis, therapy and prognosis prediction.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권11호
• /
• pp.6507-6512
• /
• 2013

The purpose of this study was to evaluate the associations of CYP1A1 genetic polymorphisms with the risk of developing esophageal cancer (EC). A case-control study was carried out in a Chinese population in which 157 hospital based EC cases and 157 population based healthy controls with 1:1 match by age and sex were included. PCR based restriction fragment length polymorphisms (PCR-RFLP) were used to detect genotypes in case and control groups. For the CYP1A1 Ile/Val polymorphism, comparing with wild genotype Ile/Ile, both the heterozygote genotype Ile/Val and the combined variant genotype Ile/Val+Val/Val increased the risk of esophageal cancer (OR: 2.05, 95%CI: 1.19-3.54, OR: 1.86, 95%CI: 1.11-3.12). No significant association was found between the CYP1A1 MspI polymorphism and EC. According to analysis of combined genotypes, the TC/AG combined genotype which contained both variant alleles of these two polymorphisms increased the risk of developing EC (OR: 2.12, 95%CI: 1.16-3.85). Our results suggested that genetic polymorphisms of CYP1A1 may increase the susceptibility to EC.

• 복식문화연구
• /
• 제24권6호
• /
• pp.725-742
• /
• 2016

In the Korean fashion industry, 3D printing systems are considered as new technology and a new opportunity. With 3D printers, consumers can be manufacturers and individuals can develop businesses with little upfront capital. In this study, a dress form for the typical Korean women's body shape was developed using 3D technology (3D scanning, 3D modeling, and 3D printing). Ten women with apparel sizes 85-91-160 were selected from 3D body-scan data collected by SizeKorea of 201 women aged 25 to 34 (2010). First, 15 horizontal cross-sections were collected from the 3D scan data of the 10 subjects. Then, inside lines of those cross-sections were drawn at 15-degree intervals, and the lengths were measured. The average of the inside lines was connected to the internal spline curve, and the curves were used as the average cross-sections. The average torso body and the dress form of Korean women were developed into a 3D solid model using a 3D CAD program (Solidworks 2012). An output mockup was printed by the FDM type's 3D printing system (Bonbot 1200, Bonbot 3-H4) using PLA material. The dimensions comparing the 3D solid modeling to the 3D printed mockup of the dress form were measured, and minor differences were between 0.00cm and 0.40cm. In the future, 3D printing systems are expected to be in use for various personalized dress forms.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.417-428
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part III, the local damage of the rigid components of aircraft, e.g., engine and landing gear, impacting the steel concrete (SC) structures of NPP containment is mainly discussed. Two typical SC target panels with the thicknesses of 40 mm and 100 mm, as well as the steel cylindrical projectile with a mass of 2.15 kg and a diameter of 80 mm are fabricated. By using a large-caliber air gas gun, both the projectile penetration and perforation test are conducted, in which the striking velocities were ranged from 96 m/s to 157 m/s. The bulging velocity and the maximal deflection of rear steel plate, as well as penetration depth of projectile are derived, and the local deformation and failure modes of SC panels are assessed experimentally. Then, the commercial finite element program LS-DYNA is utilized to perform the numerical simulations, by comparisons with the experimental and simulated projectile impact process and SC panel damage, the numerical algorithm, constitutive models and the corresponding parameters are verified. The present work can provide helpful references for the evaluation of the local impact resistance of NPP buildings against the aircraft engine.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.381-396
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part I, finite element (FE) models establishment and validations for both the aircrafts and NPP buildings are performed. (i) Airbus A320 and A380 aircrafts are selected as the representative medium and large commercial aircrafts, and the corresponding fine FE models including the skin, beam, fuel and etc. are established. By comparing the numerically derived impact force time-histories with the existing published literatures, the rationality of aircrafts models is verified. (ii) Fine FE model of the Chinese Zhejiang Sanao NPP buildings is established, including the detailed structures and reinforcing arrangement of both the containment and auxiliary buildings. (iii) By numerically reproducing the existing 1/7.5 scaled aircraft model impact tests on steel plate reinforced concrete (SC) panels and assessing the impact process and velocity time-history of aircraft model, as well as the damage and the maximum deflection of SC panels, the applicability of the existing three concrete constitutive models (i.e., K&C, Winfrith and CSC) are evaluated and the superiority of Winfrith model for SC panels under deformable missile impact is verified. The present work can provide beneficial reference for the integral aircraft crash analyses and structural damage assessment in the following two parts of this paper.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.397-416
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part II, based on the verified finite element (FE) models of aircrafts Airbus A320 and A380, as well as the NPP containment and auxiliary buildings in Part I of this paper, the whole collision process is reproduced numerically by adopting the coupled missile-target interaction approach with the finite element code LS-DYNA. The impact induced damage of NPP plant under four impact locations of containment (cylinder, air intake, conical roof and PCS water tank) and two impact locations of auxiliary buildings (exterior wall and roof of spent fuel pool room) are evaluated. Furthermore, by considering the inner structures in the containment and raft foundation of NPP, the structural vibration analyses are conducted under two impact locations (middle height of cylinder, main control room in the auxiliary buildings). It indicates that, within the discussed scenarios, NPP structures can withstand the impact of both two aircrafts, while the functionality of internal equipment on higher floors will be affected to some extent under impact induced vibrations, and A380 aircraft will cause more serious structural damage and vibrations than A320 aircraft. The present work can provide helpful references to assess the safety of the structures and inner equipment of NPP plant under commercial aircraft impact.

• 동의생리병리학회지
• /
• 제26권4호
• /
• pp.469-474
• /
• 2012

Fagopyrum esculentum(FE) is an important food crop and medicinal plant that is used to improve diabetes, obesity, hypertension, hypercholesterolemia and constipation in Korea, but the underlying mechanisms involved in its anti-allergic activity are not fully understood. We investigated the effects on the release of inflammatory mediator and proximal signal events in $Fc{\varepsilon}RI$-mediated RBL-2H3 cell activation. FE reduced antigen (DNP-HSA)-induced release of histamine, prostaglandin D2 (PGD2) and cysteinyl Leukotriene (cysLT) in IgE-sensitized RBL-2H3 cells. In addition, it inhibited antigen-induced HDC2 and COX-2 and 5-LO mRNA expression in IgE-sensitized RBL-2H3 cells. FE also suppressed antigen-induced $Fc{\varepsilon}RI{\beta}$ and $Fc{\varepsilon}RI{\gamma}$ subunit mRNA expression in these cells. To identify the mechanisms underpinning the inhibition of release of inflammatory mediators such as histamine and PGD2 and cysLT by FE, we examined the proximal signal events of intracellular FceRI signaling molecules. FE suppressed antigen-induced phosphorylation of Lyn, Syk, LAT, $PLC{\gamma}1$, PI3K, Akt and cPLA2. Collectively, the anti-allergic effects of FE in vitro suggest its possible therapeutic application to inflammatory allergic diseases, in which its inhibition of inflammatory mediator and FceRI-dependent signaling events in mast cells may be hugely beneficial.

• 한국전문물리치료학회지
• /
• 제17권2호
• /
• pp.25-32
• /
• 2010

The purpose of this study was to investigate the most effective and comprehensible method for the assessment of resting scapular position (RSP) and pain level (PL) in unilateral shoulder pain (USP). Fifty volunteers with USP were involved in the study. Resting scapular assessments of the patients' pain sides (PS) and non-pain sides (NPS) were evaluated. The assessment tools for RSP are: 1) sternal notch (SN) to coracoid process (CP) distance 2) 3rd thoracic spinous process (T3S) to posterolateral angle of acromion (PLA) distance 3) scapular index 4) 8th thoracic spinous process (T8S) to inferior angle of scapular (IAS) distance 5) supine measurement of pectoralis minor (PM) distance 6) standing PM distance 7) PM index (PMI) and 8) PM pain. The paired t-test was used to compare PS and NPS in RSP. Pearson correlation analysis was used to confer a relationship between the PL and RSP. The results of this study indicated that: 1) all the variables between the PS and NPS for RSP were statistically significant(p<.05) and 2) the PMI showed the strongest relationship in the correlation analysis between RSP and PL(p<.05, r=.37). Therefore, it can be concluded that there is a relationship between PMI and PL and it is suggested that an assessment tool using PMI to diagnose shoulder pain would be clinically effective.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권1호
• /
• pp.109-115
• /
• 2016

Background: P53 has been reported to be involved with tumorigenesis and has also been implicated as a significant biomarker in oral squamous cell carcinoma(OSCC). However, the diagnostic value of p53 antibodies remains controversial; hence, we comprehensively and quantitatively assessed the potential in the present systematic review. Materials and Methods: A comprehensive search was performed using PubMed and Embase, up to October 31, 2014, without language restriction. Studies were assessed for quality using QUADAS (quality assessment of studies of diagnostic accuracy). The positive likelihood ratio (PLR) and negative likelihood ratio (NLR) were pooled separately and compared with overall accuracy measures using diagnostic odds ratios (DORs) and symmetric summary receiver operating characteristic (SROC) curves. Results: Of 150 studies initially identified, 7 eligible regarding serum p53 antibodies met the inclusion criteria. Some 85.7% (6/7) were of relatively high quality (QUADAS $score{\geq}7$). The summary estimates for quantitative analysis of serum p53 antibody in the diagnosis of squamous cell carcinoma were: PLR 2.06 [95% confidence interval (CI) : 1.35-3.15], NLR 0.85 (95%CI: 0.80-0.90) and DOR 2.47 (95%CI: 1.49-4.12). Conclusions: This meta-analysis suggests that the use of s-p53-antibodies has potential diagnostic value with relatively high sensitivity and specificity for OSCC particularly with serum specimens for discrimination of OSCCs from healthy controls. However, its discrimination power is not perfect because of low sensitivity.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권7호
• /
• pp.3015-3023
• /
• 2012

The mitochondrial antioxidant protein manganese superoxide dismutase (MnSOD) may represent a new type of tumor suppressor protein. Overexpression of the cDNA of this gene by plasmid or recombinant lentiviral transfection in various types of cancer leads to growth suppression both in vitro and in vivo. We previously determined that changes in MnSOD expression had bidirectional effects on adriamycin (ADR) when combined with nitric oxide (NO). Radiation induces free radicals in a manner similar to ADR, so we speculated that MnSOD combined with NO would also have a bidirectional effect on cellular radiosensitivity. To examine this hypothesis, TE-1 human esophageal squamous carcinoma cells were stably transfected using lipofectamine with a pLenti6-DEST plasmid containing human MnSOD cDNA at moderate to high overexpression levels or with no MnSOD insert. Blastidicin-resistant colonies were isolated, grown, and maintained in culture. We found that moderate overexpression of MnSOD decreased growth rates, plating efficiency, and increased apoptosis. However, high overexpression increased growth rates, plating efficiency, and decreased apoptosis. When combined with NO, moderate overexpression of MnSOD increased the radiosensitivity of esophageal cancer cells, whereas high MnSOD overexpression had the opposite effect. This finding suggests a potential new method to kill certain radioresistant tumors and to provide radioresistance to normal cells.