• Solar Energy
• /
• v.17 no.3
• /
• pp.35-41
• /
• 1997

An experimental study was carried out in a vertical channel with square heat source by visualization equipment with laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two-frame grey-level cross correlation algorithm. Heat source was uniform heat flux(5W). The obtained results show various flow patterns such as the kinetic energy distribution and the turbulent kinetic energy distribution.

• 연구논문집
• /
• s.30
• /
• pp.59-65
• /
• 2000

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry)to high_speed flow characteristics within Ginseng washing machine. Three different kinds of flow rate(15,20,27 $\ell$/min)are selected as experimental conditions. Optimized cross correlation identification to obtain velocity vectors is implemented by direct calculation of correlation coefficients. Instantaneous velocity distribution, time-mean velocity distribution and velocity profiles are represented quantitatively at the full-scale region for the deeper understanding of the flow characteristics in Ginseng washing machine.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.251-256
• /
• 2009

In this research, we experimentally studied flow characteristic by applying PIV measuring techniques which could measure the point velocity of all flow field and measuring the unsteady velocity of surrounding disk generated in a short time. Time range of great velocity change following quick closing of the slide valve was within 0.1s and the cycle was presumed to be 0.12s as a result of comparison study between the result of point flow field and of existing pressure change. Also, surrounding disk flow inside the circular pipe was closed from the upper part and flow road was getting narrow and advanced to the lower part incidentally quickly there was a tendency that the size of the flow back velocity to the upper part immeadiately after the closure decreased to 4/120s and increased again. There was flow back velocity component in y/D=0.2 lower part by the influence of flow back to the upper part after complete closure and the vortex flow of 0.2D-size near y/D=0.7, x/D=-0.3 was observed.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.405-409
• /
• 2001

An experimental analysis of the flow inside the refrigeration compartment of a home refrigerator was conducted in order to achieve better performances in terms of uniform temperature distribution and cooling speed. 2D PIV and stereoscopic PIV were used for the experiments on an actual-size refrigerator at operating conditions. Two CCD cameras were employed for a wider field of view in the measurement of the shelf, and stereoscopic PIV was used to measure the three velocity components at the various cooling duct outlets and the mean velocity fields were area-integrated to calculate the flow-rates. 50 to 100 instantaneous velocity fields were time averaged for the mean velocity fields. With the result of this analysis, a new cooling duct system was developed, with the refrigerator's cooling performance increasing 11% in terms of cooling speed, and 25% in temperature uniformity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.474-474
• /
• 2017

대하천 사업 이후 국내에서 경험하지 못한 대규모 다기능 보가 설치되었으며, 이로 인해 기존 하천에 서식하던 어류들의 군집, 이동 및 환경의 변화가 발생할 수 있으며, 산란을 위해 상류로 이동하거나 하류로 이동하려는 어류들에게는 상당히 큰 문제를 야기할 수 있다. 이러한 문제점들을 최소화하기 위해 다기능 보에는 대규모 어도가 설치되었으며, 다양한 흐름해석 모형을 이용하여 어도의 유인효율평가에 대한 연구가 이루어지고 있으나 이를 검증할 수 있는 실험적 연구는 부족한 실정이다. 어도의 유인효율평가에 있어 어도입구부 유속장 측정이 중요하다. 하지만 어도 입구부에 대한 접근성은 용이하지 못 할 뿐만 아니라, 기존에 사용하던 ADCP 장비로는 유속장 측정에 한계가 있다. 이를 극복하기 위해 드론영상을 활용한 LS-PIV기법과 GPS전자부자를 활용할 필요가 있다고 판단하였고, GPS전자부자를 어도 입구부에서 일정시간 유하시키는 동시에 드론영상촬영을 활용해 LS-PIV기법을 적용하여 유속을 측정하였다. 그 결과 LS-PIV기법을 적용한 실험이 주 흐름영역에서 안정적인 결과를 보였다. 본 실험 결과를 통해 새로운 유속 계측 방안을 보여줌으로써 접근성 및 안전성에 대한 효율적인 실험계측 방법을 제시하리라 사료된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.130-131
• /
• 2013

캐비테이션 현상은 고 유속 환경에서 발생(inception), 성장(growth), 붕괴(collapse) 및 소멸(disappearance) 과정이 반복적으로 일어나며 그 과정에서 기포붕괴에 따른 큰 충격압력을 방지하려는 분야와 이를 능동적으로 산업분야에 적용하려는 분야로 크게 대별된다. 본 연구에서는 캐비테이션의 붕괴거동을 수중 초음파 진동자에서 미세기포를 발생시켜 PIV기법을 이용하여 유동장을 계측하였다. 초음파 진동자는 직경 16 mm이며, 진동주파수는 20 kHz, 진폭은 $5{\mu}m$, $10{\mu}m$, $30{\mu}m$ 및 $50{\mu}m$를 각각 적용하였다. 유동구조, 난류강도, 레이놀즈 응력에 대한 통계적 유동정보를 계측한 결과 충격압력의 원인으로 알려진 캐비티 붕괴로 인해 유동특성을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.71-76
• /
• 2017

The roll damping problem in the design of ships and offshore structures remains a challenge to many researchers due to the fluid viscosity and nonlinearity of the phenomenon itself. In this paper, the study on viscous roll damping of a circular cylinder was carried out using forced oscillations. The roll moment generated by forced oscillation using a torque sensor was measured for each forced oscillation period and compared with the empirical formula. Although the magnitude of the measured torque from the shear force was relatively small, the results were qualitatively similar to those obtained from the empirical formula, and showed good agreement with the quantitative results in some oscillation periods. In addition, the flow around the circular cylinder wall was observed closely through the PIV measurements. Owing to the fluid viscosity, a boundary layer was formed near the wall of the circular cylinder, and a minute wave was generated by periodical forced oscillations at the free surface through the PIV measurement. In this study, the suitability of the empirical formula for the roll moment caused by viscous roll damping was verified by model tests. The wave making phenomenon due to the fluid viscosity around the wall of a circular cylinder was testified by PIV measurements.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.139-145
• /
• 2001

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry) to high_speed flow characteristics within ginseng cleaner model. Three different kinds of flow rate(15. 20, 27l/min) are selected as experimental condition. Optimized cross correlation identification to obtain velocity distribution, time-mean velocity distribution, velocity, profile, kinetic energy and turbulence intensity are represented quantitatively for the deeped understanding of the flow characteristics in a ginseng cleaner model.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.239-242
• /
• 1998

A new real time sound field visualization technique is introduced in this study using PIV(Particle Imaging Velocimetry) technique. Small particles of which density is small enough to follow up the air flow are used for sound visualization. When the driving frequency is in the vicinity of the resonance frequency of the simplified 2-dimensional muffler system, an acoustic streaming is shown and of which velocity distribution is obtained through PIV technique. It is experimentally proved that the present technique is able to visualize and quantify the sound field's energy flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.7 s.238
• /
• pp.773-783
• /
• 2005

Internal flow measurement of very low specific-speed semi-open impellers has been carried out by PIV in order to understand better the internal flow patterns that are responsible fur the unique performance of these centrifugal pumps operating in the range of very low specific speed. Two types of impellers, one equipped with six radial blades (Impeller A) and the other with four conventional backward-swept blades (Impeller B), are tested in a centrifugal pump operating at a non-dimensional specific-speed of $n_s=0.24$. Complex flow patterns captured by PIV are discussed in conjunction with the overall pump performance measured separately. It is revealed that Impeller A achieves higher effective head than Impeller B even though the flow patterns in Impeller A are more complex, exhibiting secondary flows and reverse flows in the impeller passage. It is shown that both the localized strong outward flow at the pressure side of each blade outlet and the strong outward through-flow along the suction side of each blade are responsible for the better head performance of Impeller A.