• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.68-74
• /
• 2001

A design and implementation method for the UHF-band(800MHz) variable attenuator using the 3dB coupler is proposed. The 90 degree, 3-dB Coupler is used for the variable attenuator. The principal theory for the 3-dB coupler is introduced. The 3-dB Coupler is designed by the mathematical analysis and a computer simulation tool. A PIN diode is used for the variable resistor at UHF-band. The variable attenuator using the 3-dB coupler and the PIN diode is designed and implemented. The measured results for the variable attenuator by a network analyzer show that the insertion loss is below -l0dB, and the continuous variable attenuation range is about 10dB.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.63-70
• /
• 2010

We developed a new punching system that generates pinholes expressing texts or images on a plastic plate. The pin-holed plate is used as a new glamorous display board reflecting colorful lights from the light emitting diode (LED) installed on the edge side of the plate. The four degree-of-freedom punching system was designed to make same multiple holes on four plastic plates simultaneously. For this motion, we designed a structure for a simultaneous motion of the system. For even reflection of the lights from texts or images on the board and fast production of the pin-holed boards, fast motion including precise position control is very important. We also built a PC-based integrated control system including a GUI program to help users easily design luminous texts or images on the plastic plate. Also, we conducted a performance test of the system to verify the punching speed and position control of the pin holes on the plate.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.99-106
• /
• 2016

When radon is staying at alveoli and bronchial tubes, the collapse of radon creates progeny nuclides (alpha ray, beta ray, gamma ray, etc.). They emit radiation causing a mutation in the chromosome of the cell, resulting in lung cancer. In other words, the main cause of lung cancer is radiation emitting as the result of radon collapse rather than radon gas. The 82% of radiation exposed to people is the natural radiation. Most of the natural radiation is radon. If we properly control the concentration of radon indoors, the probability of occurrence of lung cancer could be decreases to be 70%. Until now, to measure the indoor radon concentration, imported radon sensors are needed. So, DB construction of indoor radon emission and popular radon measuring apparatus should be developed. In this paper, we propose the radon detecting method using PIN photodiode. Also, we confirmed the PIN photodiode could be used as radon sensor module through some experimental studies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.104-110
• /
• 2003

This paper proposed a simple 180$^{\circ}$ MMIC phase shifter for wideband application. The phase shifter simply consists of a Lange coupler and two GaAs PIN diodes. The measured performance of the phase shifter in the 2 to 6 GHz band shows a maximum phase error of less than 13$^{\circ}$, maximum 3.2 dB insertion loss, and minimum 6.3 dB return loss.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1109-1114
• /
• 2003

In this paper, the electric characteristic of the SGPS with slot in the ground plane is similar to the parallel resonant circuit. When the slot length in SGPS is equal to the half wavelength of specific frequency, the characteristic of SGPS represent the large attenuation at the specific frequency. We found out the relation between attenuation and resistor on the slot in SGPS and we designed the variable attenuator for MMIC using the variable resistor. This attenuator can be applied to AGC circuit in transceiver if the PIN diode is used replace for resistor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.360-367
• /
• 2009

In this paper, the RADANT phase scanning scheme and the transmission-type loaded line phase shifter scheme, which are applicable to the phased array systems, are studied. Using these two schemes, a theoretical method to design an electronic beam steering RADANT lens is introduced. The validity of the presented theoretical method is verified through the simplified circuit simulation results.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.68-70
• /
• 2003

New Si pin photodiodes with $p^+-cap$ region have been designed and fabricated for the application in a PDIC of the optical pick-up system. The fabricated devices were designed with the incident optical window of $120\mu\textrm{m}$ and were classified into three structures according to <$p^+-cap$ dimensions. As the result of experiments, the devices with the $p^+$-cap dimension of $0\mu\textrm{m}$(no cap), $65\mu\textrm{m}$, and $120\mu\textrm{m}$ showed the sensitivity of 1.0 A/W, 0.86 A/W, and 0.6 A/W, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.59-64
• /
• 2008

In this paper an adjustable linear gain equalizer which is operated from 6GHz to 18GHz in order to apply wideband RF circuit System is proposed and fabricated on $Al_2O_3$ substrate using thin film process. An adjustable linear gain equalizer is proposed to T type circuit and designed to aim on variable slope $-7dB{\sim}-13dB$ using the PIN Diode

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.992-999
• /
• 2008

This paper describes the design of SPST PIN diode switch which has a 2 kW high power handling capability within $50{\mu}s$ switching speed in $20{\sim}100$ MHz VHF-band. Design factors were investigated and it was confirmed by simulation that the characteristics of insertion loss, VSWR, and isolation met design goal. Also, the capability to handle 2 kW high power with maximum fast switching speed less than $20{\mu}s$ was confirmed and insertion loss less than 0.2 dB, VSWR less than 1.17:1, and isolation higher than 40 dB were obtained by experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.147-152
• /
• 2008

This paper has been fabricated the two different type of variable attenuators using a characteristics of a 3 dB directional coupler and pin diodes. One was not analyzed using the conventional even-odd modes but used simple two-port techniques. The resulting scattering parameters described operation characteristics for the general case where the terminating impedances are equal and unequal. After analyzing resistor role of the ${\pi}$ type fixed attenuator. this paper used a pin diode instead of a resistor. The variable attenuators were fabricated using pin diodes for current-controlled attenuation on the coupled ports of a 3 dB branch-line coupler and ${\pi}$ type fixed attenuator. The realized variable attenuators have more than 33 dB attenuation ranges at 2.1 GHz. and the input and output reflection coefficients are less than -13 dB. These results could be applied to mobile communication systems. It can be varied gain of the power amplifier according to change a outdoor environmental temperature and improved linearity.