Browse > Article

A Design of Variable Attenuator for MMIC using Slot in the Ground Plane  

김기래 (신라대학교 공과대학 컴퓨터공학부)
Abstract
In this paper, the electric characteristic of the SGPS with slot in the ground plane is similar to the parallel resonant circuit. When the slot length in SGPS is equal to the half wavelength of specific frequency, the characteristic of SGPS represent the large attenuation at the specific frequency. We found out the relation between attenuation and resistor on the slot in SGPS and we designed the variable attenuator for MMIC using the variable resistor. This attenuator can be applied to AGC circuit in transceiver if the PIN diode is used replace for resistor.
Keywords
MMIC; SGPS;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Orhanovic, N. Raghuram, R, and Matsui, N., Signal propagation and radiation of single and differential microstrip traces over split image planes, Electromagnetic Compatibility Symposium, Washington DC, Aug. 2000, pp.339-343
2 M. I. Montrose, Printed Circuit Board Design Techniques for EMC Compliance, 2nd edition, IEEE Press, 2000, New York
3 D. Ahn, J.S. Park, C.S. Kim, J. Kim, Y. Qian, and T. Itoh, A design of the Low Pass Filter Using the Novel Microstrip Defected Ground Structure, IEEE Trans. Microwave Theory Tech., vol. 49, No. 1, pp. 86-93, Jan. 2001   DOI   ScienceOn
4 K.S. Kuo and K.L.Wong, 'A compact micro- strip antenna with meandering slots in the ground plane,' Microwave Opt. Technology Lett. No.29, pp95-97, 2001
5 K.L. Wong and H.C. Tung, 'A compact patch antenna with an inverted U-shaped radiating patch,' 2001 IEEE Antennas Propagation Soc. Int. Symp. Dig., pp. 728-731
6 C. C. Chang, C. Caloz, and T. Itoh, Analysis of a Compact Slot resonator in the Ground Plane for Microstrip Structure, Proc. APMC 2001, pp.1100-1103