• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.312-318
• /
• 2010

High speed steels (HSS) were used as cutting tools and wear parts, because of high strength, wear resistance, and hardness together with an appreciable toughness and fatigue resistance. Conventional manufacturing process for production of components with HSS was used by casting. The powder metallurgy techniques were currently developed due to second phase segregation of conventional process. The powder injection molding method (PIM) was received attention owing to shape without additional processes. The experimental specimens were manufactured with T42 HSS powders (59 vol%) and polymer (41 vol%). The metal powders were prealloyed water-atomised T42 HSS. The green parts were solvent debinded in normal n-Hexane at $60^{\circ}C$ for 24 hours and thermal debinded at $N_2-H_2$ mixed gas atmosphere for 14 hours. Specimens were sintered in $N_2$, $H_2$ gas atmosphere and vacuum condition between 1200 and $1320^{\circ}C$. In result, polymer degradation temperatures about optimum conditions were found at $250^{\circ}C$ and $480^{\circ}C$. After sintering at $N_2$ gas atmosphere, maximum hardness of 310Hv was observed at $1280^{\circ}C$. Fine and well dispersed carbide were observed at this condition. But relative density was under 90%. When sintering at $H_2$ gas atmosphere, relative density was observed to 94.5% at $1200^{\circ}C$. However, the low hardness was obtained due to decarbonization by hydrogen. In case of sintering at the vacuum of $10^{-5}$ torr at temperature of $1240^{\circ}C$, full density and 550Hv hardness were obtained without precipitation of MC and $M_6C$ in grain boundary.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.681-685
• /
• 2008

Chiral separation of racemic mandelic acid was achieved on a Kromasil KR100-5CHI-TBB column. Some chromatographic parameters (resolution, number of theoretical plates, capacity factor) are calculated under different separation conditions such as changes of mobile phase compositions (hexane/t-BME = 85/15 - 10/90) as well as formic acid concentrations for adjusting pH (0.1, 0.5, 1.0 v/v%). Flow rate versus number of theoretical plates was compared to evaluate column efficiency. To determine the adsorption isotherms, PIM (Pulse Input Method) was carried out. At the concentrations of racemic mandelic acid between 0.1 and 0.3 mg/ml, L- and D-mandelic acids have the same retention times of 8.8 and 9.4 min respectively. Mandelic acid isotherms show a linear form under the concentrations of 0.3 mg/ml with eluent (hexane/t-BME = 75/25). As the concentrations of mandelic acids increase, nonlinear Langmuir isotherms were observed as $C_{S,L}=3.358C_{M,L}/(1+0.0897C_{M,L})$ for L-mandelic acid and, $C_{S,D}=3.692C_{M,D}/(1+0.1457C_{M,D})$ for D-mandelic acid.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.911-918
• /
• 2014

Over the past few years, security breaches have been consistently reported around the world. Especially, people's personal information are at risk of being breached as the firms gather and utilize the information for their marketing purposes. As an effort to revamp their data infrastructures, companies have rebuilt their system that almost every data, including the personal information, are stored within the digital database. However, this migration provides easier access to the database but it has also increased the system vulnerability. As the data can be easily exposed to the unauthorized personnel both intentionally and unintentionally, it is necessary for companies to establish a set of security protocol and operate the personal information protection system. There are two major certified security system in South Korea; PIMS from KISA and PIPL from NIA. This paper analyzes the preferences of SMEs and small business using conjoint attributes of PIMS and PIPL. The study shows that the business owners take post certification rewards as the most important factor. It also shows that the attributes that have the highest utility rates are the following; 1) KISA certification, 2) 79 points of protection counter measurements, 3) 28 items of life cycle, 3) 50 percent discount on certification fee, and 4) Reduced amount of fine for personal information leakage incident.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.525-543
• /
• 2008

Recently, the scope of user interface is increasing the relative importance in software development dramatically. As a result, there are various relative technologies like as SWING, MFC, Web 2.0, and etc. However, most current software developments are progressed in separate development process with user interface part and business part respectively. This causes the problems, like as a difficulty in the integration process, an development period's delay, and a poor reusability for the constructed models. That is, the extendability and reusability of the created models is being decreased because UI modeling is not systematic and hierarchical, and the consistent integration technique between UI modeling and business modeling does not supported. To solve these problems, this paper proposes an unified and systematic UI modeling process based on UML, using the hierarchical metamodel according to the abstraction levels of development phase. We suggest an UI metamodel, which contains a hierarchy by layering the modeling elements in PIM and PSM based on maturity degree of the development. An hierarchical modeling process combined UI modeling and business modeling is built by applying the UI and business metamodel in terms of three modeling phases(concept/specification/concrete). The effectiveness of the modeling process is shown by applying the proposed process into an Internet Shopping Mall System. Through the exploratory results, the hierarchical UI metamodel and process can produce systematic and layered UI models. This can improve the quality and reusability of models.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.364-368
• /
• 2007

The objective of this study was to characterize organic mater decomposition with application of livestock manure compost in upland soil. Six different composts, which were chicken (CHM), pig (PIM), and cow (COM) manure compost added and chicken (CHMS), pig (PIMS), cow (COMS) manure compost with sawdust added, were prepared for this study. These composts have different composition of crude carbohydrate (hemicellulose, cellulose, and lignin). The buried-bag method was used to determine the rate of organic mater decomposition and the changes of crude carbohydrate content during 36 months in the field. In all treatment, hemicellulose content was sharply decreased within 8 months, but considerable amount of lignin was remained after 36 months. After 40 months, the rates of carbon decreasing were 81, 80, 72, 69, 67, and 64 % for CHM, PIM, COM, CHMS, PIMS, and COMS, respectively. The estimated equation of carbon decreasing rate (D), $D=aT^b$, was fit to the carbon decreasing rate vs. elapsed time (T) using a non-linear regression procedure. After 40 months, significant difference of carbon decreasing rate between observed and estimated was not found. The relationship between constant a, b and hemicellulose content in the compost was not observed in this experiment. The cellulose and lignin content in the compost were positively correlated to the constant b and negatively correlated to the constant a.

• Korean Journal of Psychosomatic Medicine
• /
• v.23 no.1
• /
• pp.12-19
• /
• 2015

Objectives : This study examined the characteristics and differences of PAI(Personality Assessment Inventory) profile between compensation-seeking(CS) and treatment-seeking(TS) patients with traumatic brain injury(TBI) and assessed the clinical meaning of the characteristics and differences of profiles between the two groups. Methods : 36 TBI patients who visited the Wonkwang University Hospital were selected. The patients were categorized as compensation-seeking TBI patients(n=22) and treatment-seeking TBI patients(n=14). The PAI scales and subscales were used to compare differences between two groups. t-verification for each variable and comparison analysis were performed. Results:In validity scales, CS group showed significantly higher NIM scores and lower PIM scores than TS groups. In full scales, CS group showed significantly higher SOM, ANX, ARD, DEP, and SCZ scores than TS group. In subscales, CS group showed significantly higher SOM-S, ANX-A, ARD-P, DEP(-C, A, P), (MAN-I), PAR-H, SCZ(-T, P), BOR(-A, N), and ANT-S scores than TS groups. In supplementary scales, CS group showed significantly higher SUI, NON and AGG-P, and lower RXR scores than TS group. Conclusions:There were significant differences in PAI scales with validity scales, some full and subscales according to compensation seeking status in TBI patients. The CS patients tended to exaggerate their symptoms on PAI, and showed higher scores representing somatic preoccupation and emotional distress. These results show the usefulness of PAI in reflecting the significant psychological differences between two groups.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.759-764
• /
• 2018

3D porous carbon electrodes (cNPIM), prepared by solution casting of a polymer of intrinsic microporosity (PIM-1) followed by nonsolvent-induced phase separation (NIPS) and carbonization are presented. In order to effectively control the pore size of 3D porous carbon structures, cNPIM was prepared by varying the THF ratio of mixed solvents. The SEM analysis revealed that cNPIMs have a unique 3D macroporous structure having a gradient pore structure, which is expected to grant a smooth and easy ion transfer capability as an electrode material. In addition, the cNPIMs presented a very large specific surface area ($2,101.1m^2/g$) with a narrow micropore size distribution (0.75 nm). Consequently, the cNPIM exhibits a high specific capacitance (304.8 F/g) and superior rate capability of 77% in an aqueous electrolyte. We believe that our approach can provide a variety of new 3D porous carbon materials for the application to an electrochemical energy storage.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2017

This study was performed to propose the sewer defect scoring, and grading protocols for sewer condition assessment. For this, sewer defect scoring methods were comparatively analyzed and reviewed for four international condition assessment protocols, which are established based on WRc manual. As a result, we proposed a new protocol for sewer condition assessment, in which characteristics of sewer pipes are considered by segment. In reference to the PIM-3, the extent of ground subsidence was adopted to be of importance, and renewal scores increased in accordance with weighting of defects causing structural backfill materials. Also, defect grades of 'Hole' were extended to 5 levels of the grading, and 'Surface Damage' was excluded in defect assessment. The addition of 'Buckling' resulted in reduction of weights in 'Surface Damage' and 'Lining Defects'.

• Convergence Security Journal
• /
• v.2 no.2
• /
• pp.19-27
• /
• 2002

This paper proposes a group key management protocol for a secure of all the multicast user in PIM-SM multicast group communication. Each subgroup manager gives a secure key to it's own transmitter and the transmitter compress the data with it's own secure key from the subgroup manager. Before the transmitter send the data to receiver, the transmitter prepares to encrypt a user's service by sending a encryption key to the receiver though the secure channel, after checking the user's validity through the secure channel. As the transmitter sending a data after then, the architecture is designed that the receiver will decode the received data with the transmitter's group key. Therefore, transmission time is shortened because there is no need to data translation by the group key on data sending and the data transmition is possible without new key distribution at path change to shortest path of the router characteristic.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.43-54
• /
• 2006

The National Wealth Survey Method has been used to estimate capital stocks in Korea by the Korea National Statistical Office in every 10 years. However, this method requires huge amount of time and money, Since the Benchmark Year Method also has similar problems of difficulties to estimate the annual retirement rate and depreciation, the Korea National Statistical Office is now considered to adapt the Perpetual Inventory Method being used by the most OECD countries as an alternative. Hence, in this paper, the concepts of the Perpetual Inventory Method are introduced and its formation plans for the National Wealth Survey are suggested.