• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.146-149
• /
• 1999

To develope the high speed gas cutting tip, consists of 3 pieces, supersonic axisymmetric jets issuing from various kinds of nozzles with a throat diameter of a few milimeters were experimentally investigated. The nozzle inlet pressure was varied from 4 to 8 kgf/$\textrm{cm}^2$. The parameters in nozzle design were throat diameter, throat length, taper angle, outlet diameter. The total pressure variation was measured by the pilot tube, 0.5mm outer diameter, along the center of the free stream jet. Also color Shilieren system was used to visualize the flowfield.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.109-114
• /
• 1992

This paper describes an effect of operating condition on surface roughness in wire-cut FDM. The experimental values of surface roughness were measured by the test pieces under the condition of changing. On time, Off time, and Feed rate after fixing other conditions. The material of the test pieces is the alloy tool steel(STD 11) and was used after heat treatment. The results are as follows: 1. The surface roughness became rapidly worse according to the increase of On time and Feed rate. 2. The surface roughness became slowly better according to the increase of Off time.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.1
• /
• pp.171-179
• /
• 1990

This is a report on a case of delayed reconstruction after partial mandibularectomy for Ameloblastoma involving symphysis and bodies of the mandible by using of two large pieces of corticocancellous bone blocks obtained from both iliac crests. The authors failed immediate reconstruction with two kinds of Alloplasts(metal, methylmethacrylate) at two times of trial due to known infection and suggestive poor histocompatibility of materials aginst the host who has been suffered from long-term and active pulmonary tuberculosis. However we could get success late reconstruction of this problem-occured and curved area with two pieces of large corticocancellous blocks by using of miniplate osteosynthesis and biphasic external pin fixation. From our experience we are obtained some results as follows : 1. Alloplastic graft materials seemed to be dangerous to maintain successfuly in patient who has a long-term debilitating disease as a active pulmonary tuberculosis. 2. Biphasic external skeletal pin fixation appliance gave many advantages such as maintain functional position of the remained bodies and condyles of the mandible after removal of failed alloplasts and during control of inflammation of this area, assist supportive roles to fix and maintain bone grafts during healing, allow mandibular movement during healing and so offer to conduct normal functional stimuli to bone grafts during osteogenesis etc. 3. Bony union was successful between not only normal bones and grafted bones but also grafted bone pieces even though we used two pieces of large blocks of corticocancellous bone for graft. 4. Miniplate osteosynthesis was not affect any adverse effects to bone grafts but offered good role of fixation and maintenance for bone grafts.

• Mycobiology
• /
• v.40 no.1
• /
• pp.35-41
• /
• 2012

A repeated batch fermentation system was used to produce ethanol using $Saccharomyces$ $cerevisiae$ strain (NCIM 3640) immobilized on sugarcane ($Saccharum$ $officinarum$ L.) pieces. For comparison free cells were also used to produce ethanol by repeated batch fermentation. Scanning electron microscopy evidently showed that cell immobilization resulted in firm adsorption of the yeast cells within subsurface cavities, capillary flow through the vessels of the vascular bundle structure, and attachment of the yeast to the surface of the sugarcane pieces. Repeated batch fermentations using sugarcane supported biocatalyst were successfully carried out for at least ten times without any significant loss in ethanol production from sugarcane juice and molasses. The number of cells attached to the support increased during the fermentation process, and fewer yeast cells leaked into fermentation broth. Ethanol concentrations (about 72.65-76.28 g/L in an average value) and ethanol productivities (about 2.27-2.36 g/L/hr in an average value) were high and stable, and residual sugar concentrations were low in all fermentations (0.9-3.25 g/L) with conversions ranging from 98.03-99.43%, showing efficiency 91.57-95.43 and operational stability of biocatalyst for ethanol fermentation. The results of the work pertaining to the use of sugarcane as immobilized yeast support could be promising for industrial fermentations.

• Science of Emotion and Sensibility
• /
• v.7 no.4
• /
• pp.43-49
• /
• 2004

This study investigated the effect of listening to music on the reduction of public speech anxiety among middle-school female students. The subjects were 66 female first graders, 33 of the experimental and another 33 of the control group selected from two classes of C middle school in Chonan city. The level of anxiety (SAS) was rated by the subjects through self-report and the speech behavior (SBES) of the subjects were evaluated by a teacher before, a week after and two weeks after the speech trials. 64 pieces of music were selected based on the music therapy-related references. After 23 out of 64 pieces were selected for the preliminary experiment and 7 pieces as having positive effects through evaluating those 23 pieces in the other class in the same gaders were finally selected. Subjects listened to music for 40 min two times a day for two weeks with a cassette player in the classroom. The result yielded the followings: 1) Self-reported public speech anxiety decreased both in the experimental and control groups. However, there found more decrease in the music-listening group than in the non-listening music group. 2) The public speech behavior improved both in the experimental and control groups with on difference between the two groups. This suggests a possibility that SBES may not be a accurate measure to evaluate the speech anxiety. We conclude that two-week listening to music has the effect reduction on speech anxiety.

• Journal of Pharmacopuncture
• /
• v.13 no.1
• /
• pp.103-120
• /
• 2010

Objective : To review the trend of the study related to Leech therapy and to establish the hereafter direction for the study on Leech therapy. Methods : I reviewed and analyzed all the theses published in Domestic and Foreign research institution from 1990 to 2009. Results : The following results were obtained in this study. 1. Analyzed number of theses published, there was no significance per year. 2. Classified by theme of journal, journals related to surgery were most(41 journals, 75.92%) among 54 kinds. 3. Classified by theses by research method and thesis types, case report accounted for nearly twothirds (52 pieces, 68.42%) of all theses and consideration of document was next(9 pieces, 11.84%). 4. With the most case of venous congestion after plastic and reconstructive surgery(33 pieces, 63.46%), leech therapy was effective on illnesses such as haematoma, macroglossia, purpura, varicous vein, avulsion injury, neurovascular compression, diabetic neuropathy, penoscrotal oedema, buerger's disease, rheumatoid arthritis. 5. Two most appeared adverse effects were anemia and infection. Immediate blood transfusion was done for recovering anemia and prophylactic 3rd generation antibiotics to infection were emphasized in more than half of case reports. 6. All of consideration of documents was retrospective study of cases related leech therapy and 3 pieces of them emphasized prophyratic antibiotic treatment for preventing infection. 7. The study of clinical trail type started first in 2002 and osteoarthritis of knee and carpometacarpal joint were main target. As see above result, Leech therapy was effective cure and could be used in disease induced by venous congestion. And I think that it is necessary to perform additional study related to solution of problems about leech therapy and protocol for using in clinical practice.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.49-61
• /
• 2005

This study is to research the types and formation of the pieces for fastening the clothing in the western and oriental world from 18c to 19c. The pieces for fastening the clothing, depending on their formation, are classified as the ribbon type, the belt type, the button type, and the compound type. The ribbon type indicates fastening the clothing with the strips attached to the clothes. It is divided into the symmetry type and the asymmetry type by the looks of the ribbon alter it is tied. The belt type means fastening the clothing with a string or a belt, separated from the clothes. It is divided into the string type and the belt type. The button type is to fasten the clothing with buttons, button holes, and hooks. It is divided into the basic type, the wrapping type, and the knot type. The compound type is a mixture of two or three types out of the ribbon type, the belt type, and the button type. The pieces for fastening the clothing has aesthetic features as well as their functional characteristics. It has beautiful features like the harmonious beauty of Yin and Yen shown in the asymmetrical types, the beauty of spell wishing for health, long-life, wealth, wisdom, and so on, the beauty of decency showing the intention of refraining from exposing their body in public, the beauty of eroticism emphasizing the beauty of the human body, and the beauty of representing their social class, authority, affiliation, and so on.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.6
• /
• pp.738-748
• /
• 2017

Objective : We present our experience of microvascular decompression (MVD) for glossopharyngeal neuralgia (GPN) and evaluate the postoperative outcomes in accordance with four different operative techniques during MVD. Methods : In total, 30 patients with intractable primary typical GPN who underwent MVD without rhizotomy and were followed for more than 2 years were included in the analysis. Each MVD was performed using one of four different surgical techniques : interposition of Teflon pieces, transposition of offending vessels using Teflon pieces, transposition of offending vessels using a fibrin-glue-coated Teflon sling, and removal of offending veins. Results : The posterior inferior cerebellar artery was responsible for neurovascular compression in 27 of 30 (90%) patients, either by itself or in combination with other vessels. The location of compression on the glossopharyngeal nerve varied; the root entry zone (REZ) only (63.3%) was most common, followed by both the REZ and distal portion (26.7%) and the distal portion alone (10.0%). In terms of detailed surgical techniques during MVD, the offending vessels were transposed in 24 (80%) patients, either using additional insulation, offered by Teflon pieces (15 patients), or using a fibrin glue-coated Teflon sling (9 patients). Simple insertion of Teflon pieces and removal of a small vein were also performed in five and one patient, respectively. During the 2 years following MVD, 29 of 30 (96.7%) patients were asymptomatic or experienced only occasional pain that did not require medication. Temporary hemodynamic instability occurred in two patients during MVD, and seven patients experienced transient postoperative complications. Neither persistent morbidity nor mortality was reported. Conclusion : This study demonstrates that MVD without rhizotomy is a safe and effective treatment option for GPN.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.4
• /
• pp.348-355
• /
• 2013

Objectives: In working environment measurement, sampling is an important stage for obtaining reliable result as analysis. A personal air sampling pump is one of the most fundamental and important element in the work environment measurement, but it remains at the level of calibrating the flow rate of the pump before and after sampling. There is no checking whether the flow rate set at the initial stage would be hold during sampling. The purpose of this study was to develop a method to evaluate the flow rate performance of particulate sampling pump with three-pieces cassette holder containing filters commonly used to sample particulate. Materials and methods: We tested back pressure of particulate sampling pumps commonly used in Korea with three-pieces cassette holder containing various filters, and tried to find out the combination conditions of filters in accordance with back pressure required by ISO standard 13137. Results: We found out the matrix of sampling media such as three-pieces cassette holder containing filters applicable to the pressure drop required by the ISO standard for evaluating the flow rate stability under increasing pressure drop and long term(8 hour) performance. Conclusions: This evaluation method using sampling media matrix for checking flow rate stability proposed by this study could be very useful tool to find out good performance pumps before sampling.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.98-106
• /
• 2007

Statement of problem: Current tendencies of the implant macrodesign are tapered shapes for improved primary stability, but there are lack of studies regarding the relationship between the implant macrodesign and primary stability. Purpose: The purpose is to investigate the effect of implant macrodesign on the implant primary stability by way of resonance frequency analysis in the bovine rib bones with different kinds of quality. Material and method: Fifty implants of 6 different kinds from two Korean implant systems were used for the test. Bovine rib bones were cut into one hundred pieces with the length of 5 cm. Among them forty pieces of rib bones with similar qualities were again selected. For the experimental group 1, the thickness of cortical part was measured and 20 pieces of rib bones with the mean thickness of 1.0mm were selected for implant placement. For the experimental group 2, the cortical parts of the remaining 20 pieces of rib bones were totally removed and then implants were placed on the pure cancellous bone according to the surgical manual. After placement of all implants, the implant stability quotient(ISQ) was measured by three times, and its statistical analysis was done. Results: There are statistically significant differences in ISQ values among 4 different kinds of Avana system implants in the experimental group 2. For the experimental group 1, Avana system implants showed significantly different ISQ values, but when differences in the thickness of cortical parts were statistically considered, did not show any significant differences in ISQ values. Among Oneplant system implants, there are no significant differences in ISQ values for the experimental group 2 as well as for the experimental group 1. Conclusion: Within the limits of this study, bone quality and implant design have some influences on the primary stability of implants. Especially in the bone of poor quality, tapered shape of implants are more favorable for the primary stability of implants.