• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.179-182
• /
• 2002

The position information of the rotor are required while the SRG(Switched Reluctance Generator) is drived. The position information is generally provided by shaft encoder or resolver. But it is weak in the dusty, high temperator and EMI environment. Therefore, the sensor is able to required to eliminated from the SRG. In this paper, a estimation algorithm for the rotor position of the SRG is introducted and a constant DC-link voltage is controled by PID controller. The estimation algorithm is implemened by the adaptive sliding observer and that it is able to estimate the rotor position well is proved by the simulation.

• 한국지능시스템학회논문지
• /
• 제7권3호
• /
• pp.81-88
• /
• 1997

This paper dealt with the position control of a flexible miniature finger driven by piezoelectric bimorph cells, cemented on both side of the finger. Bending moments generated by cells drives the finger, and end-point of the finger is controlled, so as to move in synchrony with fluctation of target and maintain a constant distance between target surface and inger's tip. The voltage applied for the cell is controlled by tip displacement error and error rate. We proposed a PD-Fuzzy controller under conception of PD control strategy. It brought and advantage which reduce number of rules than that of same type conventional fuzzy system and more correct redponse than PID control results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.503-503
• /
• 2000

This paper presents the design technique of the using of PlI, PID and PIDA Controllers in order to achieve the desired transient and steady state responses. The merit of the proposed technique is any tuning method is not being required. By using of the forward controller, so that all given specifications to be designed can be obtained via the root locus approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.149-149
• /
• 2000

We experimented on AGV driving test with color CCD camera which is setup on it. This paper can be divided into two parts. One is image processing part to measure the condition of the guideline and AGV. The other is part that obtains the reference steering angle through using the image processing parts. First, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, AGV knows the driving conditions of AGV. After then using of those information, AGV calculates the reference steering angle changed by the speed of AGV. In the case of low speed, it focuses on the left/right error values of the guide line. As increasing of the speed of AGV, it focuses on the slop of guide line. Lastly, we are to model the above descriptions as the type of PID controller and regulate the coefficient value of it the speed of AGV.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.380-380
• /
• 2000

We have developed a design/analysis tool for use with Mat lab whick is named as "Parametric Robust Control and Identification(PROCI)". The tool is composed of three parts: Part i) consists of the identification of the continuous time transfer function by using either time domain input-output data or frequency response data, which might be experimentally obtained. Part ii) is the CDM synthesis of classical controller such as PID, Lead/Lag compensators. In part iii), the analysis of robustness of overall system can be dealt with. This tool allows us to analyze completely most of robustness issues with respect to the interval uncertaintyncertainty

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.219-224
• /
• 1996

Piezoelectric actuators exhibit limited accuracy in tracking control due to their hysteresis nonlinearity. In this study a digital tracking control approach for a piezoelectric actuator based on incorporating a feedback linearization loop with a PID feedback controller is presented. The hysteresis nonlinearity of the piezoelectric actuator is modeled in the feedback compensation loop using the Maxwell slip model. Experiments were performed on a piezoelectric 2-axis linear positioner for tracking linearly decaying sinusoidal waveforms and circles. The experimental results show that the tracking control performance is noticeably improved by augmenting the feedback loop with a model of hysteresis in the feedback compensation loop.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.615-621
• /
• 2013

A blind system for window glass has been designed and manufactured as a CapStone Design project at Seoul National University of Science and Technology. This system automatically controls the interior illuminance to maintain a uniform temperature. The aim of this project was to support an air conditioning system and heating equipment to maintain a good indoor environment. Proportional integral differential (PID) control using cadmium sulfide (CdS) sensors was applied to control it. Polaroid film was attached to the new blind system to reflect sunlight. It was found that the system had the potential to reduce energy consumption and may be used with a building energy management system (BEMS).

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.50-57
• /
• 1997

A fast tool servo (FTS) for diamond turning improves machining accuracy by quickly compensating relative position errors between the cutter and the workpiece. Therefore, the FTS needs to have large band-width with good tracking performance. Serious hysteresis nonlinearity of PZT actuators used in the FTS, however, deteriorates fast tracking performance. Several types of feedforward hysteresis compensators and feedback controllers are tested to improve tracking performance. Through simulations and experiments, control structure which yields the smallest tracking error is selected. The maximum peak to peak error in tracking a sinusoidal waveform is reduced by one fifth compared to that of a regular PID controller.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.831-836
• /
• 2006

In the process of accurate manufacture and measurement, it is necessarily required to isolate external or internal vibration due to external disturbance and internal actuators. The higher vibration isolation system gets damping around resonance, the better it is generally. This paper analyzes the performance of an existing passive air-spring for vibration isolation table by using experiment and simulation. Optimal design for a passive air spring can be obtained by tuning the size of the orifice. Also design for an active isolation system is carried out by applying PID controller and considering non-linearity of pneumatic characteristics with help of look-up table. We have developed the active vibration isolation table with the better isolation performance.

• Journal of Biosystems Engineering
• /
• 제13권2호
• /
• pp.9-17
• /
• 1988

This study was carried out to develop an agricultural robot for fruit harvesting. As the first step an experimental manipulator and its control system were constructed. The articulated manipulator driven by DC motors has 3 degrees-of-freedom. The manipulator has a gripper adequate for fruit harvesting and an upper arm which forms a kind of guiding channel so thai harvested fruit can pass through. Point-to-point control of joints are accomplished by a digital control system with a PID controller which consists of optical shaft encoders, power amplifiers using PWM, a microcomputer and a software. The microcomputer also computes the positions of manipulator and sequence of motions. The motion of the manipulator was to slow and rough that it would need further improvement.