• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1978-1983
• /
• 2011

BLDC motor is used in a wide variety of industrial and servo applications. Its features and advantages mainly consist in high value of torque/inertia ratio, high efficiency with speed range and high dynamic performance. This paper deals with the speed control of a trapezoidal type brushless DC motor using Fuzzy PI controller. The conventional PI controller has been widely used in industrial applications. If we select a optimal PI control gain, the PI controller shows very good control performance. But it is very difficult to find the optimal PI control gain. Fuzzy control does not need any model of plant and is basically adaptive and gives robust performance for plant parameter variation. Therefore the combinations of conventional PI controller and fuzzy controller seem to be very effective. This paper deals with PI controller with 4-rule based fuzzy controller. The proposed fuzzy PI controller increases the control performance of the conventional PI controller. Simulation and experimental results show that fuzzy PI controller has a good robustness regarding the improper tuned PI controller.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.65-66
• /
• 2016

이 논문은 자성체 주변에 자기장과 자기장 기울기를 형성하여 자성체의 위치와 각도를 제어하는 자기장 제어 시스템을 위한 제어법을 제안한다. 자기장 제어 시스템을 구성하는 각 코일은 전류 제한 아래 동작하게 되는데 만약 각 코일이 독립적으로 제한되는 경우 합성된 자기장이 주어진 지령과 달라져 자성체의 정렬 및 병진운동 방향이 잘못 제어될 수 있다. 이 논문은 이를 방지하여 방향 우선 제어를 수행하기 위한 비례 전류 지령 보정법을 제안한다. 이와 함께 전압 제한으로 인해 발생할 수 있는 자성체의 과도기 방향 제어 오류를 방지하기 위한 PI 전류제어기 이득 설정 방법을 제안한다. 제안된 전류 지령 보정법의 유효성은 실험을 통해 확인되었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1021-1022
• /
• 2011

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.115-124
• /
• 2009

This paper proposed an adaptive fuzzy controller for controlling speed and positions of a container crane. The motor used in container crane is installed as SynRM with variable-speed drive having the robustness on the problems of energy and environment. The conventional PI controller is not able to accurately track the position, speed and sway angle of trolley due to the factors of environment and the parameter variety. In the paper, we analyzed the performance of SynRM derive applied to the container crane by using an adaptive fuzzy control of SynRM in order to solve those problems. This paper analyzed the characteristics of position and speed response and compared the performance of PI controller with an adapative Fuzzy controller, proving the validity.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.25-28
• /
• 2002

본 논문은 마이크로 프로세스로 처리되는 여러 제어장치들 중에서 PI제어기의 최적 자동동조에 관한 개선된 방법을 제안하고자 한다. 이 방법은 Relay 자동동조 법으로서 이를 마이크로 프로세스에 응용하여 제어대상에 최적의 PI계수를 입력하게된다. 이를 위해 먼저 Computer와 DSP사이에 통신이 가능하도록 RS-232를 설치하고, 컴퓨터의 제어신호에 따라 모터의 속도가 Relay와 PI제어기에 의해 목표값에 도달할 수 있도록 설계하였다. 내부적으로 사용된 Relay 동조방식은 Relay로 제어대상의 출력을 강제로 진등시켜서 출력의 진폭과 주기를 이용하여 PI 계수를 조정하고 제어기의 입력값으로 선택된다. Relay동조 법은 동조과정이 간단하여 동조 방식의 구현이 쉽다. 또 위상여유를 고려하여 제어기의 계수를 조정하기 때문에 시스템의 견실성을 향상시킬 수 있을 뿐 아니라, 비례 제어만으로 임계 진동을 하지 않는 시스템의 경우에도 사용할 수 있고, 원점에 극점이 있는 경우에도 적용할 수 있어서 기존의 제어방식이 가지는 제약성의 한계를 극복할 수 있어서 적용성이 우수하다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.511-518
• /
• 2021

In order to obtain a good tracking performance of the motor, it is necessary to design a controller that can respond to a disturbance by including a disturbance observer. The disturbance observer of the motor is designed to estimate the load torque and the back electromotive voltage based on the first-order low-pass filter. A PI controller and an IP controller were designed to compare the correlation between the disturbance observer and the controller and to obtain improved control performance. To check the performance of the designed observer and the controller, it was applied to a 120 [W] class BLDC motor. As a result, overshoot is reduced, and it can be seen that the steady-state error converges to zero.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.109-115
• /
• 2010

A main technology of opening and closing a sluice gate is accurate synchronous and position control for the two cylinders when they are moving with the sluice gate together over 10[m]. Since the supply flow and supply pressure of cylinders are not constant and a nonlinear friction force of the piston in cylinders exists, a difference will be made between the displacement of two cylinders. This difference causes the sluice gate to deform and abrade, and even it may be out of order. In order to solve this problem we design two kinds of fuzzy PI controllers. The former is for a position control of two cylinders, the latter is for their synchronous control. We show some simulation results compare the performance of fuzzy PI controller to the conventional PID controller.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.651-657
• /
• 2012

In many control fields high position performance is essentially required in reducing the over-shoot phenomena which is produced by improving the quick response in starting and in minimizing the variation of the response characteristic on disturbance and load variation In this paper, the design method for a position control is suggested for constructing the PI-PD controllers by using an internal PD feedback loop in PI and PD control system. Applying this method to the position control system used a DC servo motor as a driver, the transfer PI and PD controllers are designed simultaneously and the coefficients of these controllers are determined by using the transfer function of a plant and a proportional coefficient from mathematical technique. From the result of computer simulation in PI-PD control system by applying this control technique, we can verify the usefulness of this method in rejecting of over-shoot of starting, compensating of response variation on the load variation, and shorting the settling time.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1225-1227
• /
• 1992

This paper presents a study on the variable structure PI(proportional and integrate) control which is insensible to the variation of parameters or external disturbance for driving DC motor. In the presented variable structure PI control (VSPIC), the sliding mode control was used at the below of 4000 rpm and PI control also used at the above of 4000 rpm with no load. In other way, the PI control was used at the below of 4000 rpm and the sliding mode control at the above of 4000 rpm with some loading, and then the output waveform following the variation of load was measured. intel 8031 microcomputer unit and IBM PC was combined to form the full system and the speed control was performed with it. The experimental result of the fast response to speed was more improve than it was open loop state. For load varing, the sliding mode insensible to external disturbance was applied and the improved response was obtained.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.272-273
• /
• 2017

계통연계 인버터 시스템은 기존 L 필터보다 낮은 THD를 가지며 저가격의 작은 부피로도 효율적으로 고조파를 저감할 수 있는 LCL 필터를 많이 사용하고 있다. LCL 필터를 가지는 계통연계 인버터의 제어를 위해서는 PI 제어기가 사용되고 있으며 일반적으로 다수의 PI 제어기가 사용되고 있어 많은 제어기 이득을 동시에 설계해야 하는 한계를 지닌다. 본 논문에서는 LCL 필터를 갖는 3상 계통연계 인버터의 상태공간 모델을 이용하여 상태공간에서의 상태 궤환 제어기의 설계기법을 제시한다. 상태 궤환 제어기를 적용함으로서 다수의 PI 제어기 이득을 설계하는 번거로움을 줄일 수 있으며 체계적인 과정으로 제어기가 설계될 수 있다. 제안된 기법의 타당성과 성능이 PSIM 시뮬레이션을 통하여 입증된다.