• 한국잠사곤충학회지
• /
• 제42권1호
• /
• pp.42-47
• /
• 2000

Structural and thermal characteristics of silk fibroin/poly(2-hydroxyethyl methacrylate)(PHEMA) blend films were investigated using FTIR, X-ray diffractometer, differential scanning calorimeter, thermogravimeter and scanning electron microscope. FTIR spectra showed that the conformation of silk fibroin prepared by dissolving in formic acid was $\beta$-sheet, which did not affected by blending with PHEMA. The X-ray diffraction patterns also showed that individual crystalline structure of silk fibroin and PHEMA was not affected for the blend films. The initial thermal decomposition temperature of silk fibroin/PHEMA blend film tends to be higher than either of silk fkbroin or PHEMA. Thermal stability of both polymers, more notably PHEMA, can be improved by blending two components. As a result of SEM observation, the phases separation for silk fibroin/PHEMA blend films occured regardless of blend ratio ; continuous and dispersed phase were silk fibroin and PHEMA component, respectively.

• Macromolecular Research
• /
• 제13권6호
• /
• pp.529-532
• /
• 2005

A novel amphiphilic, symmetric rod-coil, triblock copolymer (denoted as PHEMA-b-PF-b-PHEMA) of poly(9,9-didodecylfluorene-2,7-diyl) (PF) and poly(hydroxyl ethyl methacrylate) (PHEMA) was synthesized. A $\pi$-conjugated poly(9,9-didodecylfluorene-2,7-diyl) (PF) was used as a rodlike midblock segment and connected with hydrophilic end blocks of poly(hydroxyl ethyl methacrylate) (PHEMA) by using an ATRP technique. The chemical structure of PHEMA-b-PF-b-PHEMA was confirmed by $^{1}H$-NMR and GPC, and its PL properties were investigated in selected solvents. Due to the dissimilarities in molecular conformation and solubility between PHEMA and PF blocks, both block segments were segregated to display a phase-separated morphology on a Si wafer.

• 대한화학회지
• /
• 제39권1호
• /
• pp.76-80
• /
• 1995

소수성 Polydimethylsiloxane(PDMS)과 친수성인 poly(2-hydroxyethyl methacrylate)(PHEMA)의 공중합체를 합성하여 여러가지 용매의 팽윤도를 측정하였다. 그 결과 PHEMA의 용해도 파라미터$(\delta)$가 26$(J/c m^3)^{1}2}$인> 것으로 나타났다. PHEMA의 함량이 많은 공중합체에는 $\delta$값이 큰 에탄올의 함유율이 높았으며, PDMS의 함량이 많은 경우 $\delta$값이 작고 극성인 tetrahydrofuran의 함유율이 높았다. 또한 용매의 $\delta$값이 클수록 PDMS의 함량의 증가와 함께 용매 함유율은 증가하였다. 모델 의약으로 사용된 crystal violet(CV)의 흡수거동을 조사한 결과 CV의 흡수율은 PHEMA 단일 중합체보다 PDMS가 함유된 공중합체일 때 더 큰 값을 나타내었다. 공중합체 중의 PDMS 함량이 증가하면 CV의 흡수율은 감소하였다.

• 폴리머
• /
• 제35권1호
• /
• pp.94-98
• /
• 2011

생체 적합하고 온도 및 pH에 대한 민감성을 갖는 하이드로젤로서 Pluronic과 acrylic acid (AAc) 공단량체를 도입한 개질 PHEMA 가교젤을 광중합법을 사용하여 제조하고 그 팽윤거동을 조사하였다. 하이드로젤에 도입된 온도민감성 Pluronic의 영향 때문에 낮은 온도에서는 높은 팽윤거동을 보이다가 졸-젤 전이 이상의 온도에서 젤 수축이 일어나고 팽윤비의 감소가 나타났다. 한편 이온성의 AAc 공단량체의 도입과 함량 증가에 따라 하이브리드 젤의 팽윤비는 증가하였으며, 이들 구조가 갖는 일정 pH 영역에서 이온화 영향으로 pH에 민감한 팽윤거동을 나타내었다. 한편 SEM을 통해 하이드로젤의 다공성 모폴로지 변화를 관찰하였다.

• Macromolecular Research
• /
• 제17권1호
• /
• pp.26-30
• /
• 2009

To modify and strengthen the properties of PHEMA hydrogel, composite hydrogels containing varying amounts of a Pluronic (PEO-PPO-PEO) component were synthesized by bulk polymerization of HEMA in the presence of Pluronic dimethacrylate under mild photo initiating conditions. The effects of the Pluronic component on gel properties were investigated by measuring the degree of swelling with its temperature responsive behavior, the mechanical properties, and the morphology of the composite hydrogels. With increased Pluronic content, the modified PHEMA hydrogels exhibited an increase in the degree of swelling, and the swelling showed an enhanced thermo-responsive behavior that was completely reversible. In addition, improved mechanical strength and the development of a microporous gel morphology were observed in hydrogels containing Pluronic.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.926-930
• /
• 2009

A new method for encapsulating nanomaterials within intermediary layer cross-linked (ILCL) polymeric micelles using a bifunctional photo-cross-linking agent was developed. For ILCL polymeric micelles, an amphiphilic triblock copolymer of poly(ethylene glycol)-b-poly(2-hydroxyethyl methacrylate)-b-poly(methyl methacrylate) (PEG-PHEMA-PMMA) was synthesized via consecutive atom transfer radical polymerization (ATRP), Di(4-hydroxyl benzophenone) dodecanedioate (BPD) was used as a bifunctional photo-cross-linking agent. The PMMA-tethered Au nanoparticles and BPD, or pyrene and BPD were encapsulated in the PEG-PHEMA-PMMA micelles, and their intermediary layers were photo-cross-linked by UV irradiation for 1 h. The HEMA units donated labile hydrogens to the excited-state benzophenone groups in BPD, and they were subsequently cross-linked by BPD through radical-radical combination. The spherical structures of the PEG-PHEMA-PMMA micelles containing the Au nanoparticles or pyrene were unaffected by the photo-cross-linking process.

• 멤브레인
• /
• 제19권4호
• /
• pp.302-309
• /
• 2009

원자전달 라디칼 중합을 이용하여 polystyrene-b-poly (hydroxyethyl methacrylate) (PS-b-PHEMA) 블록 공중합체를 합성한 뒤, 블록 공중합체의 -OH 그룹과 이미다졸 디카르복실릭산 (IDA)의 -COOH 그룹과의 에스테르 반응에 의하여 가교된 전해질막을 제조하였다. 인산($H_3PO_4$)을 도핑하여 이미다졸-인산 착체를 형성한 결과, 인산 함량이 증가함에 따라 공중합체 전해질막의 수소 이온 전도도가 계속 증가하였다. 또한 인장강도와 인장률 모두 인산 함량에 따라 증가하였다. 특히 [HEMA]: [IDA]:[$H_3PO_4$] = 3:4:4의 조성을 갖는 PS-b-PHEMA/IDA/$H_3PO_4$ 블록 공중합체 전해질막은 $100^{\circ}C$의 비가습 조건에서 최대 0.01 S/cm의 수소이온 전도도를 나타내었다. 열분석(TGA) 실험을 통하여 전해질막은 $350^{\circ}C$의 고온까지 열적으로 안정함을 확인하였다.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.325-331
• /
• 2009

The synthesis and the characterization of crosslinked ABC triblock copolymer, i.e. polystyrene-b-poly (hydroxyethyl methacrylate)-b-poly(styrene sulfonic acid), (PS-b-PHEMA-b-PSSA) is reported. PS-b-PHEMA-b-PSSA triblock copolymer at 20:10:70 wt% was sequentially synthesized via atom transfer radical polymerization (ATRP). The middle block was crosslinked by sulfosuccinic acid (SA) via the esterification reaction between -OH of PHEMA and -COOH of SA, as demonstrated by FTIR spectroscopy. As increasing amounts of SA, ion exchange capacity (IEC) continuously increased from 2.13 to 2.82 meq/g but water uptake decreased from 181.8 to 82.7%, resulting from the competitive effect between crosslinked structure and the increasing concentration of sulfonic acid group. A maximum proton conductivity of crosslinked triblock copolymer membrane at room temperature reached up to 0.198 S/cm at 3.8 w% of SA, which was more than two-fold higher than that of Nafion 117(0.08 S/cm). Transmission electron microscopy (TEM) analysis clearly showed that the PS-b-PHEMA-b-PSSA triblock copolymer is microphase-separated with a nanometer range and well developed to provide the connectivity of ionic PSSA domains. The membranes exhibited the good thermal properties up to $250^{\circ}C$ presumably resulting from the microphase-separated and crosslinked structure of the membranes, as revealed by thermal gravimetric analysis (TGA).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.204-204
• /
• 1999

The plasma source ion implantation(PSII) technique which is a method using high negative voltage pulse in plasma system has the potential to change the surface properties of polymer. PSII technique increase the surface free energy by introducing polar functional groups on the surface so that it improves reactivity, hydrophilicity, adhension, biocompatability, etc. However, the mobility of polymer chains enables the modified surface layers to adapt their composition to interfacial force. This hydrophobic recovery interrupts the stability of modified surfaces to keep for the long time. In this study, poly(methyl methacrylate)(PMMA), poly(2-hydroxyethyl methacrylate)(PHEMA), and polu(2-hydroxypropyl methacylate)(PHPMA) for contact lens application, were modified to improve the wettability with PSII technique and were investigated the surface stabilities. Polymer film was prepared with solution casting(3 wt.% solution) and was annealed at 11$0^{\circ}C$ under vacuum oven to remove solvent completely and to eliminate physical ageing. The thickness of the film measured by scanning electron microscopy (SEM) and surface profilometer was about 10${\mu}{\textrm}{m}$. Polymers were treated with different kinds of gases, pulse frequency, pulse with, pulse voltage, and treatment time. Even though PMMA, PHEMA, and PHPMA have similar repeat unit structure, the optimal treatment conditions and the tendency to hydrophobic recovery were different. PHPMA, more hydrophilic polymer than PMMA and PHEMA showd better wettability and stability after mild treatment. Surface tensions were obtained by water and diiodomethane contact angle measurements to monitor the relation between hydrophobic recovery and polymer structure. Different ion species in plasma change the polar component and dispersion component of polymer surface. For better wettability surface, the increase of polar component was a dominant factor. We also characterized modified polymer surfaces using x-ray photoelectron spectroscopy(XPS), secondary ion mass spectrometry(SIMS), Fourier Transform infrared spectroscopy(FT-IR), and SEM.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.359-367
• /
• 2019

Poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels modified with various co-monomers, such as N-vinyl pyrrolidone (NVP), glycidyl methacrylate (GMA), and glycerol monomethacrylate (GMMA), were prepared to investigate the effect of adding a co-monomer on the water contents, surface wettability, and tensile modulus. These polymers were synthesized by thermal- and photo-polymerization in the presence of azobisisobutyronitrile (AIBN) and diphenyl(2,4,6-trimethylbenzoyl)-phosphineoxide (TPO) as the initiators. The characteristics of the hydrogels were analyzed via FTIR and UV/Vis spectroscopies, contact angle measurements, and tensile modulus measurements with UTM. Regarding the properties of water in the hydrogels, the ratio between free to bound water was investigated using differential scanning calorimetry (DSC). The effects of adding the co-monomers on the water content, surface wettability, and tensile modulus for soft contact lenses were also investigated. In the case of p(HEMA-co-NVP) hydrogels, the increase in the equilibrium water content (EWC) was primarily due to the increase in the bound water content. For p(HEMA-co-GMMA) hydrogels, an increase in free water content was the main reason for the increased EWC. In contrast, in the case of p(HEMA-co-GMA) hydrogels, a decrease in bound water content was observed to be the main factor that reduced the EWC. Photo-polymerized PHEMA hydrogels showed enhanced surface wettability and tensile modulus as compared to those produced via thermal polymerization.