• 한국포장학회지
• /
• 제24권2호
• /
• pp.41-48
• /
• 2018

본 연구에서는 산소지시물질을 이용한 새로운 UV-activation 인쇄형 시간-온도 이력지시계(time temperature integrator; TTI)를 개발하였다. $TiO_2$와 glycerol이 UV activation을 위해서 첨가되었으며 glycerol의 경우 비가역적반응을 위해 첨가량을 23 mg으로 조절하였다. 또한 인쇄적성을 위해 zein 함량 0.8 g, 90% ethanol 함량 4.0 g으로 조절하였고 silk screen의 mesh는 250 mesh일 때 최적의 인쇄성상을 나타내었다. 서로 다른 커버필름(PE, PET, OPP, and LLDPE)을 이용하여 색변화속도와 온도의존성을 측정하였다. 각 필름의 $E_a$를 측정한 결과 OPP, PE, LLDPE의 경우 60.07-84.47 kJ/mol의 $E_a$를 나타내어 TTI로서의 적용가능성을 확인할 수 있었다. 반면 PET의 경우 $E_a$가 15.76 kJ/mol으로 적용성이 떨어지는 것으로 판단되었다. 또한 커버필름의 두께의 경우 $E_a$에 영향을 미치지 않는 것으로 나타났으며 annealing한 필름은 고분자 구조의 변화로 인해 산소 투과도가 annealing하지 않은 동종의 필름보다 PET의 경우 29.8%, PVC의 경우 60.7% 감소하는 것으로 나타났다. 본 연구에서 새롭게 개발된 UV-activation 인쇄형 TTI는 다양한 커버필름을 통해 산소 투과도와 $E_a$를 조절할 수 있었고 annealing을 통하여 추가적으로 산소 투과도를 조절할 수 있어 다양한 유효기간을 갖는 식품에 광범위하게 사용될 수 있을 것으로 기대된다.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.192-196
• /
• 2011

The multi-layered thin film with an ITO/Ag/ITO structure was produced on PET by using magnetron reactive sputtering method. First, 30 nm of ITO thin film was coated on PET by using normal temperature process. Then 20-52 nm of the Ag thin film was coated. Lastly, 30 nm of ITO thin film was coated on Ag layer. The sample of the 20 nm Ag thin film showed more than 70% transmission and a $2.7{\Omega}/{\Box}$ sheet resistance. When compared to the existing single-layered transparent conducting thin film, multi-layered film was found to be superior with about $5{\Omega}/{\Box}$ less sheet resistance. However, since the Ag layer became thinner, the band gap energy needs to be increased to more than 3.5 eV.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.153-159
• /
• 2014

본 연구에서는 고경질 도막재로 PET 필름을 접합하는 시공방법에 있어서 PET 필름의 표면처리 조건 및 겹침이음 길이에 따른 접합특성 및 내구특성을 검토하였는데, 그 결과 무처리 보다 코로나 방전 처리에 의해 접촉각, 접합 인장강도, 벗김저항성이 개선되었다. 특히 시험체 E (코로나 방전+프라이머+강접접착제+폴리에스터 부직포)에서 가장 높은 것으로 나타났으며, 특히 겹침 이음길이 15mm 이상일 때 16주간 장기간 열화처리에도 안정적인 접합성능을 확보하는 것으로 나타나 방수재료로서 수밀성을 확보할 것으로 판단된다.

• 한국레이저가공학회지
• /
• 제10권1호
• /
• pp.19-27
• /
• 2007

Previous studies demonstrated that laser ablation under transparent liquid can result in ablation enhancement and particle removal from the surface. Although the ablation enhancement by liquid is already known for semiconductor and metal, the phenomena of polymer ablation have not been studied. In this work, tile liquid-assisted excimer laser ablation process is examined for polymer materials, such as polyethylene terephthalate (PET), polymethyl methacrylate (PMMA) with emphasis on ablation enhancement and surface topography. In the case of PET and PMMA, the effect of liquid is analyzed both for thin water film and bulk water. The results show that application of liquid increases the ablation rate of PMMA while that of PET remains unchanged even in the liquid-assisted process. However, the surface roughness is generally deteriorated in the liquid-assisted process. The surface topography is found to be strongly dependent on the method of liquid application, i.e., thin film or bulk liquid.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.593-596
• /
• 2007

A possibility of manufacturing bendable ac-PDP using aluminum electrode with anodic aluminum oxide dielectric material system on PET film substrate was explored. For this structure, PET film with fence-structured aluminum electrodes was used for front plate and PET film with barrier ribs of UV curable resin for the rear plate. The results demonstrate that it is feasible to manufacture the bendable ac-PDPs using those material system and are expected to expand the applications of plasma display panels.

• 한국염색가공학회지
• /
• 제2권2호
• /
• pp.1-6
• /
• 1990

In order to investigate the fine structural changes of poly (ethylene terephthalate) film by hydrazinolysis, PET was treated with hydrazine hydrate in methanol at $30^{\circ}C$ for various times. Initially apparent crystallite size and degree of orientation are increased and then, gradually decreased with hydrazinolysis. According to thermoluminescence measurement, trap site decreased by dissolution and then gradually increased with growth of defect in structure. Maximum peak temperature of tan and dynamic loss modulus E" upon hydrazinolysis shifted to the lower temperature in the progress of hydrazinolysis.ysis.

• 조명전기설비학회논문지
• /
• 제22권11호
• /
• pp.36-43
• /
• 2008

In this parer aluminium-doped zinc oxide(ZnO:Al) conducting layer was deposited on polyethylene terephthalate(PET) substrate by r. f. magnetron sputtering method. The effects of gas pressure and r. f. sputtering power on the structural and electrical properties of ZnO:Al thin film were investigated experimentally. Especially the effect of position of PET substrate on the electrical properties of the film was studied and fixed to improve the electrical properties and also to increase the deposition rate. The results show that the structural and electrical properties of ZnO:Al thin film were strongly influenced by the gas pressure and sputtering power. The minimum resistivity of $1.1{\times}10^{-3}[{\Omega}-cm]$ was obtained at 5[mTorr] of gas pressure, and 18D[W] of sputtering power. The deposition rate of ZnO:Al film at 5[mTorr] of gas pressure was 248[nm/min]. and is higher by around 3 times compared to that at 25[mTorr].

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.596-600
• /
• 2004

In this study, the surface properties of PET film were analyzed after plasma surface treatment. After plasma treatment of surface roughness and XPS were evaluated to analyze the chemical property, while the surface potential decay and surface resistance rate was measured to analyze the electric관 characteristic. When plasma discharge treatment was conducted for less than 10 minutes, the electrical insulating property was improved by evaporation of low molecular weight materials and cleaning of surface. However, when the treatment was conducted for more than 10 minutes, the insulating property was decreased due to excessive discharge energy. Analyses of chemical characteristics showed that 10-minute treatment resulted in increase of C-O and O=C-O bonds. However, when treated for more than 10 minutes. they were relatively decreased.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.483-489
• /
• 1996

Power transformer have many unsymmetrical structure and electric field is enhanced in that area. Those unsymmetrical area are not covered oftenly by solid insulating material which is used as a framework specially in gas transformer. By that result there is a possibility to decrease the total insulation class of the transformer. So in this study the electrical characteristic of $FC+SF_6$ mixture gas which is used as coolants for large power gas insulated transformer and its effects on electrical characteristics of structural material are investigated. Also breakdown characteristic with the tension of taping and curvature of the coil are studied which could be used as a design factor of large power transformer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.415-421
• /
• 1999

This paper indicate that phase resolved partial discharge patterns are investigated on PET films containing artificial void of varing dimensions. In this study, we measured phase-resolved PD patterns and statistical parameter from PET specimens with IGT(insulation/airgap/insulation) structure by IEC 270 standard. Measurement system is the conventional PD detector using digital signal processing technique. The relationship of diameter and location of artificial void was discussed through the difference of $\pi$-q-n distribution and statistical analysis.