• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 2부
• /
• pp.617-619
• /
• 2011

본 논문에서는 기존 PE 이중벽관을 확장형 이중벽으로 제작하여 생산시간을 단축시키는데 그 목적이 있고, 그에 따른 구조적 특징으로 인하여 외압 강도를 향상시킬 수 있으며, 기존 제품에서 발생했던 불량의 원인을 제거할 수 있는 PE 확장형 이중벽관을 개발하는 것이다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1998년도 추계학술발표회 논문집
• /
• pp.323-329
• /
• 1998

• 상하수도학회지
• /
• 제26권3호
• /
• pp.343-354
• /
• 2012

A electro-foaming fusion wrap fitting for polyethylene sewer pipe was built and foaming mechanism has been studied. A foaming sheet, supporting sheet and clamping band is assembled into a all-in-one structured electro-foaming fusion wrap fitting. To specify foaming and fusion of electro-foaming fusion wrap for PE sewer pipe, series of fusion tests were performed in various conditions. A parallel plate compression test up to 50 % of inner diameter deflection has been performed to check integrity of fusion quality and it was found that there were no visible signs of crack in wrapped area of fitting. Also air tightness test based on KS M 3511-2 has been performed to evaluate perfectness of wrap fusion quality and we found there were no pressure drop up to 10 times higher value than KS standard regulation.

• 한국산학기술학회논문지
• /
• 제9권1호
• /
• pp.182-188
• /
• 2008

폐폴리에틸렌 필름을 재활용하기 위하여 폐폴리에틸렌과 비산재를 사용하여 콤파운드를 제조하였다. 실험에 사용한 고분자는 생활쓰레기에서 분리수거한 폴리에틸렌(PE)과 포장용 필름을 생산하는 공장에서 발생하는 스크랩에서 얻어지는 저밀도폴리에틸렌(LDPE)과 선형저밀도폴리에틸렌(LLDPE)이다. 폐폴리에틸렌의 물리적 성질을 개량시키기 위하여 화력발전소 굴뚝에서 포집한 석탄재와 생활쓰레기 소각로굴뚝에서 얻어지는 비산재를 사용하였다. 발전소 석탄재를 투입하면 재활용 LDPE와 LLDPE 콤파운드의 인장강도는 감소하고 굴곡모듈러스는 증가하였다. 역청탄재를 혼합한 경우에 비하여 무연탄재를 투입한 LLDPE 콤파운드의 인장강도와 굴곡강도가 약간 높았으며, 이는 무연탄재가 다소 많은 량의 미연소 탄소를 가지기 때문으로 사료된다. 생활쓰레기에서 얻어진 PE 단독에 소각로 비산재를 투입하면 인장강도와 굴곡강도가 모두 증가하였다. 이와 같은 소각로 비산재에 의한 상승효과는 생활쓰레기 PE에 포장용 필름 스크랩의 LDPE를 섞게 되면 Filler 입자가 LDPE의 결정화를 방해하기 때문에 상쇄되는 현상이 관찰되었다. 소각로 비산재를 혼합하여 생활쓰레기 PE를 재활용한 콤파운드는 하수관 등을 제조하는 원료로 사용이 가능하다. 본 연구결과를 폐플라스틱의 재활용에 적용시키면 폐기물처리 비용을 절감하고 환경보존과 자원절약에 기여할 수 있다.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.907-914
• /
• 2012

Flexible pipes take advantage of their ability to move, or deflect, under loads without structural damage. Common types of flexible pipes are manufactured from polyethylene (PE), polyvinyl chloride (PVC), steel, glass fiber reinforced thermosetting polymer plastic (GFRP), and aluminum. In this paper, we present the result of an investigation pertaining to the short-term behavior of buried polyethylene pipe. The mechanical properties of the polyethylene pipe produced in the domestic manufacturer are determined and the results are reported in this paper. In addition, vertical ring deflection is measured by the laboratory model test and the finite element analysis (FEA) is also conducted to simulate the short-term behavior of polyethylene pipe buried underground. Based on results from soil-pipe interaction finite element analyses of polyethylene pipe is used to predict the vertical ring deflection and maximum bending strain of polyethylene pipe.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1012-1017
• /
• 2010

Sewer Pipes are not being managed for twenty years after laying. So, The life span of sewer pipes is on the decrease. For solve the life span decrease of sewer pipes, correct checking of questions and measure preparation are necessary through investigation in sewer pipes. This research investigated on the state of sewer pipes in the housing and industrial sites through CCTV(closed-circuit television) and device of digitalized strain investigation. And, a result is as follows. A results of PE, PVC, GRP, CSP investigations were found of pipe-transformation state by earth pressure and external load.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.141-152
• /
• 2011

In this study, we extracted effective factors of pipe burst from the status data of water asset, operating data of pressure, volume and etc. and 7 years' pipe burst and repair records. The extracted factors were sorted by each attribution and then a statistical analysis was performed to generate a pipe burst probability function using the logistic regression model. As the result, material, diameter, length, laying year, pressure and road width affected to pipe burst significantly. Especially, in case of small diameter, laying year was most effective factor and in case of steel pipe, external loading was main cause of burst, and in case of cast iron, PE, PC, HP pipes, the deterioration of joint was main cause. The other side, as a result of Hosmer-Lemeshow goodness of fit test the models are turned out significant statistically. Also the classification criteria were determined to minimize the total cost from classification errors, when the predicted probability was more than 18% this pipe could have a chance of burst.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2004년도 추계학술발표회 논문집
• /
• pp.158-163
• /
• 2004

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.509-510
• /
• 2009

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.96-102
• /
• 2012

The current establishment of car engineering plastic piping polyethylene (PE) tube used as bonding state or part of the health or safety of fusion is very important. A part of these fusion methods to determine the soundness of the short-term trials and long-term tests can be largely classified. Typical tests included short-term strength, tensile strength, impact strength, compressive strength, resiliency and compression. Polyethylene (PE) pipes installed in the domestic terms of overall penetration rate of 45% has been used. However, polyethylene (PE) pipes have reliability problems, and these occurs mostly in part by defective welding. Therefore, the test is necessary for safety. Non-destructive methods (ultrasonic testing) are difficult to be used. Therefore, Polyethylene (PE) pipe are used. Fusion of thses materilas is necessary in these field however, its technical, and basic research has not been studied well. In this research, short-term strength of welding parts, its tensile strength, hardness, fatigue, and microstructure have been analyzed to find the optimum process conditions to improve mechanical properties.