Seo, Yeong-Su;Lee, Gyu-Sang;Byeon, Hyeong-Seok;Jang, Ha-Jun;Choe, Beom-Ho
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.371.1-371.1
/
2014
반도체 트랜지스터의 크기가 점점 미세화 함에 따라 이에 수반되는 절연막에 대한 요구 조건도 까다로워지고 있다. 특히 게이트 산화 막의 두께는 10 nm 이하에서 고밀도를 갖는 높은 유전율 막에 대한 요구가 증가되고 있으며 또한 증착 온도 역시 낮아져야 한다. 이러한 요구사항을 충족하는 기술중의 하나는 매우 낮은 압력 및 200도 이하 저온에서 절연막을 증착하는 것이다. 본 연구에서는 플라즈마 화학 기상 증착(PE-CVD) 시스템을 이용하여 $180^{\circ}C$의 온도 및 10 mTorr의 압력에서 SiN 및 SiCN 박막을 제조하였다. 박막의 특성은 원자층 증착 공정 결과와 유사하면서 증착 속도의 향상을 위해 개조된 사이클릭 화학 기상 증착 공정을 이용하였다. Si 전구체와 산화제는 기판에 공급되기 전에 혼합되어 1차 리간드 분해를 하였으며, 리간드가 일부 제거된 가스가 기판에 흡착되는 구조이다. 기판흡착 후 플라즈마 처리 공정을 이용하여 2차 리간드 분해 공정을 수행하였으며, 반응에 참여하지 않은 가스 제거를 위해 불활성 가스를 이용하여 퍼지 하였다. 공정 변수인 플라즈마 전력, 반응가스유량, 플라즈마 처리 시간은 최적화 되었다. 또한 효율적인 리간드 분해를 위해 ICP와 CCP를 포함하고 있는 이중 플라즈마 시스템에 의해 2회에 걸쳐 분해되어지고, 그 결과로 불순물이 들어있지 않는 순수한 SiN과 SiCN 박막을 증착하였다. XRD 측정 결과 증착된 박막들은 모두 비정질 상이며, 550 nm 파장에서 측정한 SiN 및 SiCN 박막의 굴절률은 각 각 1.801 및 1.795이다. 또한 증착된 박막의 밀도는 2.188 ($g/cm^3$)로서 유전체 박막으로 사용하기에 충분한 값임을 확인하였다. 추가적으로 300 mm 규모의 Si 웨이퍼에서 측정된 비 균일도는 2% 이었다. 저온에서 증착한 SiN 및 SiCN 박막 특성은 고온 공정의 그것과 유사함을 확인하였고, 이는 저온에서의 유전체 박막 증착 공정이 반도체 제조 공정에서 사용 가능하다는 것을 보여준다.
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.189-189
/
2010
최근 연구와 생산에 가속이 붙기 시작한 AMOLED는 모두 LTPS TFT를 사용하고 있다. LTPS TFT는 높은 전자 이동도를 가지고 있기 때문에 현재 각광 받는 AMOLED에 잘 맞는다. 하지만 LTPS TFT는 균일성이 낮고 고비용이라는 문제점이 있으며, 현재 대면적 기술이 부족한 상태이다. 극복방안으로 AMOLED를 타겟으로 하는 Oxide TFT와 a-Si TFT의 기술이 발전되고 있다. Oxide TFT는 AMOLED backplane으로 사용될 수 있는 강력한 후보 중의 하나이다. Oxide TFT는 단결정 산화물과 다결정 복합 산화물 두 가지 범주를 가지고 있다. 본 연구에서는 다결정 Oxide TFT의 하나인 ZTO TFT를 연구함으로서 Engineer의 근본적 이슈인 저비용에 초점을 맞추어 소자특성을 확인해보도록 한다. n-type wafer 에 PE-CVD 장비를 이용하여 SiNx를 120 nm 증착하고, channel layer인 ZTO 용액을 spin-coating을 이용하여 형성하였다. 균일하게 형성된 ZTO의 결정을 위하여 $500^{\circ}C$에서 1시간 동안 공기 중에서 annealing을 하였다. 과정을 거친 ZTO는 약 30 nm 두께로 형성되었다. Thermal evaporator를 이용하여 Source, Drain의 전극을 형성 하고, wafer 뒷면에는 Silver paste를 이용하여 Gate를 형성하였다. 제작된 소자를 dark room temperature 에서 측정 하였다. 측정된 소자는 우수한 전기적 특성과 0.96 cm2/Vs 인 이동도를 얻어냈다. 이러한 소자의 안정성에 따른 전기적 특성을 관측하기 위하여 상온에서 $100^{\circ}C$ 까지의 온도 스트레스를 주었다. Stress에 따른 소자는 상온에서 시작하여 온도가 올라갈수록 이동도가 낮아지고, 문턱전압 증가와 SS이 커짐을 알 수 있었다. 캐리어의 운동 매커니즘에서 온도가 올라가면 격자진동의 영향을 크게 받음으로서 캐리어의 이동도가 낮아져 전기적 특성이 낮아지는 점이 본 연구에도 적용됨을 알 수 있었다. 본 연구를 통하여 화학적 안정성을 지닌 소자라는 점과 더불어 여타 TFT공정에 비하여 현저히 낮은 공정비용을 통하여 AMOLED가 요구하는 수준의 특성에 가까운 소자를 제작할 수 있다는 것을 확인하였으며 앞으로의 추가적인 연구에 따라서 더욱 완성된 공정기술을 기대할 수 있었다.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.341-341
/
2011
최근 AMOLED 구동이 가능한 소자에 대한 연구가 활발히 진행중이다. AMOLED구동 가능소자는 LTPS TFT, a-Si TFT, OTFT, Oxide TFT가 있으며 그 중에서 현재 대부분 LTPS TFT를 사용하고 있다. LTPS TFT는 높은 전자 이동도와 안정성을 가지고 있기 때문에 현재 각광 받는 AMOLED에 잘 맞는다. 하지만 LTPS TFT는 고비용, 250$^{\circ}C$ 이상의 공정온도, Substrate가 Glass, Metal로 제한 된다는 문제점이 있으며, 균일성이 낮고 현재 대면적 기술이 부족한 상태이다. 해결방안으로 AMOLED를 타겟으로 하는 Oxide TFT 기술이 떠오르고 있다. Oxide TFT는 이동도가 높고 저온공정이 가능하며 Substrate로 Plastic 기판을 사용할 수가 있어 차후에 Flexible 소자로서의 적용이 가능하다. 또한 기존의 진공장비 사용대신 용액공정이 가능하여 장비사용시간 및 절차를 단축시킬 수 있어 비용적인 유리함을 가지고 있다. Oxide TFT는 단결정 산화물과 다결정 복합 산화물 두 가지 범주를 가지고 있다. Oxide TFT의 재료물질은 ZnO, ZTO, IZO, SnO2, Ga2O3, IGO, In2O3, ITO, InGaO3(ZnO)5, a-IGZO이 있다. 본 연구에서는 산화물질 중 하나인 ZTO를 이용하여 TFT 소자를 제작하였다. 산화물 특성상 열처리 온도에 따라 형성되는 결정의 정도가 다르기 때문에 온도 및 시간 변수에 따른 ZTO의 특성변화에 초점을 맞추어 연구함으로서 최적화된 조건을 찾고자 실험을 진행하였다. 실험을 위한 기판으로 n-type wafer을 사용하였다. PE-CVD 장비를 이용하여 SiNx를 120 nm 증착하고, ZTO 용액을 spin-coating을 이용하여 channel layer을 형성하였다. 균일하게 형성된 ZTO의 결정을 위하여 200$^{\circ}C$, 300$^{\circ}C$, 400$^{\circ}C$, 500$^{\circ}C$에서 1시간, 3시간, 6시간, 10시간의 온도 및 시간 변수를 두어 공기 중에서 열처리 하였다. ZTO는 약 30 nm 두께로 형성되었다. Thermal evaporator를 이용하여 Source, Drain의 알루미늄 전극을 형성하고, wafer 뒷면에는 Silver paste를 이용하여 Gate전극을 만들었다. 제작된 소자를 dark room temperature에서 측정하였다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.25
no.4
/
pp.145-152
/
2015
In this work, we were investigated the effect of the additive gases on the relationship between bonding structure and mechanical properties of the deposited films when the DLC films were deposited on Si-wafer by the rf-PECVD method with the addition of small amounts of carbon dioxide and nitrogen to the mixture gas of methane and hydrogen. The deposition rate of the films increased as the rf-power increased, while it decreased with increasing the amount of additive gases. Also, as the carbon dioxide gas increased, the hydrogen content in the films decreased but the $sp^3/sp^2$ ratio of the films increased. In case of nitrogen gas, the hydrogen content decreased, however the $sp^3/sp^2$ ratio and nitrogen gas flow rate did not show a specific tendency.
Kim, Dong-Jin;Lee, Mun-Gwon;Lee, Jeong-Hwan;Im, Hyeon-U;Park, Jin-Gu;Sin, Sang-Taek;Kim, Jeong-Ho;Jo, Byeong-Gi
Proceedings of the Materials Research Society of Korea Conference
/
2009.05a
/
pp.49.2-49.2
/
2009
최근, 플루이딕스칩 제작에 있어서 가격이 저렴하며 구조물 형성이 쉽다는 장점으로 인하여 유리 기판을 플라스틱 기판으로 대체하려는 연구가 많이 진행하고 있다. 하지만 플라스틱 기판은 유리 기판에 비하여 많은 장점을 갖고 있음에도 불구하고, 기판 표면이 소수성이기 때문에 유체의 흐름을 저하시키는 문제점이 있다. 기존의 플라스틱 기판을 친수성으로 개질하는 방법으로는 화학적처리, 자외선 조사, 산소플라즈마 처리 등의 방법이 있었으나, 화학적처리 방법은 공정의 민감성과 폐기물로 인한 양산적용의 한계가 있고, 자외선 조사법 및 산소 플라즈마 처리는 친수성이 영구적이지 않다는 결정적인 문제점이 있다. 이는 플라스틱 플루이딕스칩의 신뢰도를 크게 저해하여 상용화에 큰 문제점으로 작용한다. 이러한 문제점을 극복하기 위한 새로운 방법의 친수성 표면처리가 요구되어 지고 있다. 본 연구에서는, 기존 플라스틱 기판의 친수성 표면처리 방법들의 문제점들을 개선하고자 플라스틱 기판의 변형을 야기하지 않는 저온 PE-CVD 방식을 이용하여 균질한 두께의 $SiO_2$박막을 형성 하였으며, 형성된 박막을 liquid self-assembled monolayer(L-SAM)방식을 이용하여 아민 표면으로 개질하였다. 이를 통해, 플라스틱 채널 상에서 유체의 원활한 흐름, 형성된 아민 표면에 단백질 및 DNA와 같은 생체 물질 고정화의 용이성 및 영구적 표면개질의 특성을 얻을 수 있었다. 이뿐만 아니라, 플라스틱 기판 외에도 재료에 관계없이 모든 물질의 표면을 생체 안정성이 뛰어난 친수성 표면으로 개질 할 수 있으며, 알데히드 및 카르복시산 등의 다양한 작용기로 변형이 쉽다는 장점이 있다. 개질된 친수성 표면의 평가를 위하여 시간에 따른 접 촉각 및 형광 스캐너(Fluorescence Scanner)를 이용하여 영구적인 친수성 특성 및 생체물질 적합성을 파악하였다. 또한, L-SAM 조건에 따른 아민의 형성정도를 측정하기 위하여 XPS(X-ray Photoelectron Spectroscopy) 분석을 실시 하였다. 최적화된 표면처리를 실제 플라스틱 플루이딕스칩에 적용하여, 유체의 흐름을 관찰 하였다.
Kim, Young-Su;Kang, Min-Ho;Nam, Dong-Ho;Choi, Kang-Il;Lee, Hi-Deok;Lee, Ga-Won
Journal of the Korean Institute of Electrical and Electronic Material Engineers
/
v.22
no.10
/
pp.821-825
/
2009
Recently, transparent ZnO-based TFTs have attracted much attention for flexible displays because they can be fabricated on plastic substrates at low temperature. We report the fabrication and characteristics of ZnO TFTs having different channel thicknesses deposited at low temperature. The ZnO films were deposited as active channel layer on $Si_3N_4/Ti/SiO_2/p-Si$ substrates by RF magnetron sputtering at $100^{\circ}C$ without additional annealing. Also, the ZnO thin films deposited at oxygen partial pressures of 40%. ZnO TFTs using a bottom-gate configuration were investigated. The $Si_3N_4$ film was deposited as gate insulator by PE-CVD at $150^{\circ}C$. All Processes were processed below $150^{\circ}C$ which is optimal temperature for flexible display and were used dry etching method. The fabricated devices have different threshold slop, field effect mobility and subthreshold slop according to channel thickness. This characteristics are related with ZnO crystal properties analyzed with XRD and SPM. Electrical characteristics of 60 nm ZnO TFT (W/L = $20\;{\mu}m/20\;{\mu}m$) exhibited a field-effect mobility of $0.26\;cm^2/Vs$, a threshold voltage of 8.3 V, a subthreshold slop of 2.2 V/decade, and a $I_{ON/OFF}$ ratio of $7.5\times10^2$.
Aluminum-oxide($Al_2O_3$) thin films were deposited by electron cyclotron resonance plasma-enhanced atomic layer deposition at room temperature using trimethylaluminum(TMA) as the Al source and $O_2$ plasma as the oxidant. In order to compare our results with those obtained using the conventional thermal ALD method, $Al_2O_3$ films were also deposited with TMA and $H_2O$ as reactants at $280^{\circ}C$. The chemical composition and microstructure of the as-deposited $Al_2O_3$ films were characterized by X-ray diffraction(XRD), X-ray photo-electric spectroscopy(XPS), atomic force microscopy(AFM) and transmission electron microscopy(TEM). Optical properties of the $Al_2O_3$ films were characterized using UV-vis and ellipsometry measurements. Electrical properties were characterized by capacitance-frequency and current-voltage measurements. Using the ECR method, a growth rate of 0.18 nm/cycle was achieved, which is much higher than the growth rate of 0.14 nm/cycle obtained using thermal ALD. Excellent dielectric and insulating properties were demonstrated for both $Al_2O_3$ films.
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.365-365
/
2010
Similar to the superhydrophobic surfaces of lotus leaf, water strider leg is attributed to hierarchical structure of micro pillar and nano-hair coated with low surface energy materials, by which water strider can run and even jump on the water surface. In order to mimick its leg, many effort, especially, on the fabrication of nanohairs has been made using several methods such as a capillarity-driven molding and lithography using poly(urethane acrylate)(PUA). However most of those effort was not so effective to create the similar structure due to its difficulty in the fabrication of nanoscale hairy structures with hydrophobic surface. In this study, we have selected a low surface energy polymeric material of polytetrafluoroethylene (PTFE, or Teflon) assisted with surface modification of CF4 plasma treatment followed by hydrophobic surface coating with pre-cursor of hexamethyldisiloxane (HMDSO) using a plasma enhanced chemical vapor deposition (PE-CVD). It was found that the plasma energy and duration of CF4 treatment on PTFE polymer could control the aspect ratio of nano-hairy structure, which varying with high aspect ratio of more than 20 to 1, or height of over 1000nm but width of 50nm in average. The water contact angle on pristine PTFE surface was measured as approximately $115^{\circ}$. With nanostructures by CF4 plasma treatment and hydrophobic coating of HMDSO film, we made a superhydrophobic nano-hair structure with the wetting angle of over $160^{\circ}C$. This novel fabrication method of nanohairy structures has been applied not only on 2-D flat substrate but also on 3-D substrates like wire and cylinder, which is similarly mimicked the water strider's leg.
Sin, Ui-Cheol;Kim, Jin-Ju;Lee, Byeong-Ju;Jeong, Gu-Hwan
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.67-67
/
2010
탄소나노튜브(CNT)는 우수한 기계적, 화학적, 전기적 특성으로 인해 다양한 분야에서 차세대 응용재료로서 각광을 받고 있다. 다양한 CNT의 합성방법 중 CNT 구조제어가 가장 용이한 방법으로는 열화학증기증착법(TCVD)와 플라즈마지원(PE) CVD법이 있으며, 대량합성을 위해서는 TCVD가 보다 일반적으로 이용되어지고 있다. 일반적으로 CNT를 합성하기 위해서는 전이금속의 촉매가 필요하며 촉매의 활성화 및 탄소를 포함하는 원료가스의 분해를 위하여 고온공정이 요구된다. 그러나 향후 산업적 응용을 고려한다면 저온합성법의 개발은 시급하게 해결해야 할 과제로 인식되고 있다. 또한 기판 위에 CNT를 합성하는 경우 촉매와 기판재료 사이의 합금화를 방지하기 위하여 산화막층을 삽입하게 되는데, 이는 CNT의 높은 전도성을 이용하고자 할 경우 저해요소로 작용하게 된다. 따라서 CNT를 완충층의 도움 없이 금속기판 위에 직접 성장시키는 기술 역시 향후 CNT응용에 있어서 중요한 과제라 할 수 있다. 상기와 같은 배경으로 본 연구에서는 금속기판 위 CNT의 저온성장을 목적으로 연구를 진행하였다. CNT 합성기판으로는 SUS316L 및 Inconel과 같은 촉매금속을 자체 함유한 금속기판을 선정하였고, 플라즈마 전처리를 통한 기판표면 제어를 통하여 CNT의 저온성장을 도모하였다. 직류전원의 아르곤 플라즈마를 이용하여 금속기판을 처리하였을 때 기판온도 및 플라즈마 파워가 증가함에 따라 기판의 표면조도가 증가하는 것을 AFM분석을 통해 확인할 수 있었다. 아세틸렌 가스를 원료가스로 이용한 TCVD합성에 있어서는 플라즈마 처리한 기판이 무처리 기판보다 동일 합성온도에서 더 두꺼운 CNT박막을 형성하였고, 합성온도는 $400^{\circ}C$ 부근까지 내릴 수 있었다. 이는 플라즈마 처리로 증가된 기판의 표면조도가 저온에서 CNT의 핵생성에 유리하게 작용했음을 추측하게 한다.
Electrical properties as a function of composition in silicon nitride ($SiN_x$) films grown at low temperatures ($<200^{\circ}C$) were studied for applications to photonic devices and thin film transistors. Both silicon-rich and nitrogen-rich compositions were successfully produced in final films by controlling the source gas mixing ratio, $R=[(N_2\;or\;NH_3)/SiH_4]$, and the RF plasma power. Depending on the film composition, the dielectric and optical properties of $SiN_x$ films varied substantially. Both the resistivity and breakdown field strength showed the maximum value at the stoichiometric composition (N/Si = 1.33), and degraded as the composition deviated to either side. The electrical properties degraded more rapidly when the composition shifted toward the silicon-rich side than toward the nitrogen-rich side. The composition shift from the silicon-rich side to the nitrogen-rich side accompanied the shift in the photoluminescence characteristic peak to a shorter wavelength, indicating an increase in the band gap. As long as the film composition is close to the stoichiometry, the breakdown field strength and the bulk resistivity showed adequate values for use as a gate dielectric layer down to $150^{\circ}C$ of the process temperature.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.