• Title/Summary/Keyword: PD/C Ratio

Search Result 99, Processing Time 0.021 seconds

Recovery of Palladium (Pd) from Spent Catalyst by Dry and Wet Method and Re-preparation of Pd/C Catalyst from Recovered Pd (폐촉매로부터 Pd회수 및 이를 이용한 Pd/C 촉매 재제조 기술 개발)

  • Kim, Ji Sun;Kwon, Ji Soo;Baek, Jae Ho;Lee, Man sig
    • Applied Chemistry for Engineering
    • /
    • v.29 no.4
    • /
    • pp.376-381
    • /
    • 2018
  • The purpose of this study is to investigate and optimize an effectiveness process for the recovery of Pd from the spent Pd/C catalyst by the process of hydrogenation of maleic anhydride over Pd/C. Pd solution recovered from Pd/C catalyst was used to prepare Pd/C catalysts. Their characteristics were compared to those of Pd/C catalyst prepared by using a reagent grade precursor solution. Pd in the spent catalyst was leached by the modified process with dry and wet methods to obtain the high recovery ratio of Pd. The burn-out of carbon in the spent Pd/C catalyst was carried out in the rage of $600-900^{\circ}C$. Pd content of carbonized catalyst was confirmed by XRF and ICP. Pd was extracted from carbonized spent catalysts with acid solutions of 1,2 and 4 M HCl at a leaching temperature of $90^{\circ}C$ for 2 h. The high recovery ratio of Pd was shown as 92.4% that leached in 4 M HCl. Also Pd/C catalysts were prepared by using the leached solution and the reagent grade of $H_2PdCl_4$ as a precursor solution and the characteristics were analyzed by XRD, CO-chemisorption and FE-TEM. As a result, the dispersion of the catalyst prepared by using the leached solution was 34.6%, which was found to be equal to or more than that of the Pd/C catalyst prepared by the reagent grade precursor solution.

Application of carbon-supported PdPt as anode catalysts in PEM fuel cell (PdPt/C 촉매의 고분자전해질 연료전지의 산화극 촉매 적용)

  • Cho, Yong-Hun;Choi, Baeck-Beom;Cho, Yoon-Hwan;Park, Hyun-Seo;Sung, Yung-Eun
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.11a
    • /
    • pp.396-398
    • /
    • 2006
  • PdPt/C (Pd:Pt atomic ratio of around 19:1 60wt, %) 촉매를 고분자전해질 연료전지용 전극 촉매소재의 적용하였다. PdPt/C 촉매를 산화극 촉매로, 환원극 촉매로는 Pt/C 촉매를 사용하고 반대로 산화극 촉매는 Pt/C 촉매, 환원극 촉매로는 PdPt/C 촉매를 사용했을 때, PdPt/C 촉매를 산화극과 환원극 촉매로 동시에 사용했을 때의 고분자전해질 연료전지의 단위전지 성능을 각각 비교하였다. PdPt/C촉매를 산화극에만 적용했을 때에 Pt/C 상용촉매를 산화극과 환원극에 모두 적용했을 때의 성능만큼 좋은 성능을 확인할 수 있었다. 환원극 촉매는 Pt/C를 사용하고 산화극 촉매를 PdPt/C Pt/C Pd/C를 사용하였을 매의 성능을 비교하였다. Pd/C를 산화극 촉매로 사용한 단위전지가 나머지 두 경우의 성능에 비하여 현저히 떨어짐을 확인할 수 있었다. 이는 극소량의 Pt 량을 포함한 PdPt/C 촉매가 고분자전해질 연료전지의 산화극 Pt/C 촉매의 대체촉매로 사용 가능함을 보여준다.

  • PDF

Evaluation of Visual Responses in Viewing a 3D Image (3D 영상 시청 시 시각반응의 평가)

  • Lee, Mu-Hyuk;Son, Jeong-Sik;Kim, Jaedo;Yu, Dong-Sik
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.17 no.2
    • /
    • pp.165-170
    • /
    • 2012
  • Purpose: The aim of this study was to measure and evaluate changes of visual responses in viewing a 2D and 3D (three-dimensional) image. Methods: The subjects were 44 college students aged 19 to 25 years with normal binocular vision. The visual responses measured were CA/C (convergence accommodation/convergence) ratio, convergence-induced PD(interpupillary distance), accommodative responses, perceived distance in viewing a 3D image. Results: Convergence and accommodative responses in viewing the 3D image were significantly larger (p<0.05) than in 2D. A moderate positive correction was found between CA/C ratio and accommodative response (r = 0.477, p = 0.001). It was indicated that smaller PD had larger depth perception. Convergence in viewing the 3D image was significantly larger (p<0.05) than that at cognitive distance. Conclusions: The visual fatigue may be more intense in larger CA/C ratio and smaller PD when viewing 3D images.

Irreversibly Adsorbed Tri-metallic PtBiPd/C Electrocatalyst for the Efficient Formic Acid Oxidation Reaction

  • Sui, Lijun;An, Wei;Rhee, Choong Kyun;Hur, Seung Hyun
    • Journal of Electrochemical Science and Technology
    • /
    • v.11 no.1
    • /
    • pp.84-91
    • /
    • 2020
  • The PtBi/C and PtBiPd/C electrocatalysts were synthesized via the irreversible adsorption of Pd and Bi ions precursors on commercial Pt/C catalysts. XRD and XPS revealed the formation of an alloy structure among Pt, Bi, and Pd atoms. The current of direct formic acid oxidation (Id) increased ~ 8 and 16 times for the PtBi/C and PtBiPd/C catalysts, respectively, than that of commercial Pt/C because of the electronic, geometric, and third body effects. In addition, the increased ratio between the current of direct formic acid oxidation (Id) and the current of indirect formic acid oxidation (Iind) for the PtBi/C and PtBiPd/C catalysts suggest that the dehydrogenation pathway is dominant with less CO formation on these catalysts.

Influence of Pd Concentration and Substrate Temperatures on the Magnetic Property in Permalloy Films (Pd 첨가와 기판온도 변화에 따른 퍼말로이 합금박막의 자기특성변화)

  • 이기영;송오성;윤종승;김경각
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.15 no.9
    • /
    • pp.818-821
    • /
    • 2002
  • We investigated the evolution of magnetic property with varying palladium (Pd) contents and elevating substrate temperatures up to 200 $^{\circ}C$ during dc-sputtering. We observed that saturation magnetization (Ms), remanence and anisotropic magnetoresistance (AMR) ratio decrease with Pd contents in the case of keeping the substrate temperature at 3$0^{\circ}C$. However they increase by adding 2 %Pd, then decrease above 3 %Pd when we keep the substrate temperature at 20$0^{\circ}C$. Coercivity does not change with Pd contents. Our results imply that we may tune the Ms and AMR with Pd contents and substrate temperature in permalloy films.

Influence of Level of Feed Intake on Concentration of Purine Derivatives in Urinary Spot Samples and Microbial Nitrogen Supply in Crossbred Bulls

  • George, S.K.;Dipu, M.T.;Mehra, U.R.;Verma, A.K.;Singh, P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.9
    • /
    • pp.1291-1297
    • /
    • 2006
  • The potential of the spot urine sampling technique as an alternative to performing a total urine collection to predict the microbial nitrogen supply was evaluated in crossbred bulls. In a completely randomized design, 20 growing crossbred bulls were assigned four levels of feed intake (120, 100, 80 and 60% of voluntary dry matter intake) on diets comprised of wheat straw and concentrate mixture (50:50). After three months of experimental feeding, a metabolism trial was conducted for ten days, during which spot urine collections were performed every 6 h post feeding on days 9 and 10. The daily urinary excretion of allantoin (A) and purine derivatives (PD) decreased with the reduction in feed intake while creatinine (C) excretion remained similar in animals fed at different levels. The microbial nitrogen (MN) supply calculated from the PD excreted in total urine (35.08 to 72.08 g/d) was higher at increased levels of feed intake. PD concentration in spot urine samples had poor correlation with feed intake except at 12 h post feeding. A/C ratio and PD/C ratio in spot urine samples remained similar irrespective of sampling time and significantly (p<0.01) correlated with daily urinary PD excretion, digestible organic matter intake and dry matter (DM) intake. However, no significant differences were evident in these ratios among animals fed at levels 120, 100 and 80% of voluntary dry matter intake (VDMI) at different times post feeding. These results suggests that the spot urine sampling technique to predict the microbial protein supply is not suitable for detecting small differences in MN supply and hence, estimation of PD excreted in total urine (mmol/d) is necessary to assess precisely the MN supply in crossbred bulls.

Glass Transition Temperature of Poly(methyl methacrylate) Obtained with Ferrocene-Based Diimine Pd(II) Catalyst (Ferrocene-Based Diimine Pd(II) 촉매로 얻은 폴리(메틸메타크릴레이트)의 유리전이온도)

  • 박태학;이동호;김태정;박동규
    • Polymer(Korea)
    • /
    • v.26 no.3
    • /
    • pp.410-414
    • /
    • 2002
  • The late transition Pd catalyst of low oxophilicity that has ferrocene -based diimine ligand for stabilization of center metal had been synthesized and applied for the polymerization of methyl methacrylate (MMA). In the presence of triisobutylaluminium (TIBA) for impurity scavenger, the effects of polymerization temperature and [TIBA]/[Pd] mole ratio on the yield and glass transition temperature ($T_g$) of PMMA had been examined. For 40~$50^{\circ}C$ of polymerization temperature and 2000~3000 of [TIBA]/[Pd] mole ratio, higher polymer yields were obtained. It was observed that ($T_g$) of PMMA is almost independent to the polymerization temperature but influenced by the [TIBA]/[Pd] mole ratio. With the examination of($T_g$) of PMMA with the structure of polymer, it had been found that T$_{g}$ of PMMA exhibits a linear relationship with the isotacticity of polymer.r.

CA/C Ratio of Adults in Their Early Twenties with Normal Binocular Vision (양안시가 정상인 20대 초반 성인의 CA/C비)

  • Lee, Mu-Hyuk;Yu, Dong-Sik
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.17 no.2
    • /
    • pp.153-158
    • /
    • 2012
  • Purpose: The purpose of this study was to evaluate the convergence accommodation to convergence (CA/C) ratio and to investigate relationships among age, accommodative amplitude and PD (interpupillary distance) of adults in their early twenties with normal binocular vision. Methods: 44 subjects (mean age, $21.75{\pm}1.16$ years) with healthy eyes were examined. The CA/C ratios were measured by using the difference of Gaussian (DOG) target with retinoscopy. Results: The mean CA/C ratio was $0.052{\pm}0.017$ D/$\Delta$. A moderate negative correction was present between CA/C ratio and age (r = -0.50, p = 0.0005), and a highly positive correction was found between CA/C ratio and accommodative amplitude (r = 0.79, p<0.0001). There was no relation between PD and CA/C ratio. Conclusions: The CA/C ratio presented was mean value for adults in their early twenties with healthy eye between 19 and 25 years of age. There was a high correlation between accommodative amplitude and CA/C ratio. Therefore, the CA/C ratio will be useful basic information for comparison in age, gender and binocular anomalies with similar data from other countries.

Study of Pd Target Power Effects on Physical Characteristics of Pd-Doped Carbon Thin Films Using Dual Magnetron Sputtering Method (듀얼 마그네트론 스퍼터링 법으로 제조된 Pd-Doped Carbon 박막의 물리적 특성에서 Pd 타겟 전력의 영향에 대한 연구)

  • Choi, Young-Chul;Park, Yong Seob
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.35 no.5
    • /
    • pp.488-493
    • /
    • 2022
  • Generally, diamond-like carbon films (a-C:H, DLC) have been shown to have a low coefficient of friction, a high hardness and a low wear rate. Pd-doped C thin film was fabricated using a dual magnetron sputtering with two targets of graphite and palladium. Graphite target RF power was fixed and palladium target RF power was varied. The structural, physical, and surface properties of the deposited thin film were investigated, and the correlation among these properties was examined. The doping ratio of Pd increased as the RF power increased, and the surface roughness of the thin film decreased somewhat as the RF power increased. In addition, the hardness value of the thin film increased, and the adhesive strength was improved. It was confirmed that the value of the contact angle indicating the surface energy increases as the RF power increases. It was concluded that the increase in RF power contributed to the improvement of the physical properties of Pd-doped C thin film.

Characteristics of Pd Catalysts for Methane Oxidation (메탄 산화를 위한 Pd 촉매의 특성)

  • Lee, Jin-Man;Yang, O-Bong;Kim, Chun-Yeong;Woo, Seong-Ihl
    • Applied Chemistry for Engineering
    • /
    • v.10 no.4
    • /
    • pp.557-562
    • /
    • 1999
  • The reaction properties of Pd. Pd-Ce and Pd-La catalysts supported on ${\gamma}-Al_2O_3$ were investigated in the oxidation reaction of methane($CH_4$) exhausted from the compressed natural gas vehicle in a U-tube flow reactor with gas hourly space velocity of $72,000h^{-1}$. The catalysts were characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), BET surface area and hydrogen chemisorption. Pd catalyst prepared by $Pd(NO_3)_2$ as a palladium precursor and calcined at $600^{\circ}C$ showed the highest activity for a methane oxidation. Catalytic activity of calcined $Pd/{\gamma}-Al_2O_3$ in which most of palladium was converted into palladium oxide species was higher than that of reduced $Pd/{\gamma}-Al_2O_3$ in which most of palladium existed in palladium metal by XRD. As increasing the number of reaction cycles in the wide range of redox, the catalytic activity of $Pd/{\gamma}-Al_2O_3$ was decreased and the highly active window became narrower. Lanthanum oxide promoted Pd catalyst, $Pd/La/{\gamma}-Al_2O_3$ showed enhanced thermal stability compared with $Pd/{\gamma}-Al_2O_3$ even after aging at $1000^{\circ}C$, which was ascribed to the role of La as a promoter to suppress the sintering of palladium metal and ${\gamma}-Al_2O_3$ support. Almost all of methane was removed by the reaction with NO at the redox ratio of 1.2 in case of oxygen excluded steam, but that activity was significantly decreased in the steam containing oxygen.

  • PDF