• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.9-18
• /
• 2004

OFDM is a special case of multicarrier transmission, where a high-rate datastream is transmitted over a number of lower rate subcarriers. In this paper, the structure of ORM system is studied, and causes of inter carrier interference (ICI) are analyzed. Based on analysis, this paper shows a technique to prevent a distortion due to nonlinearity of high power amplifier. The proposed scheme is a predistorter(PD) for high power amplifier linearization in OFDM system. This is verified by comparing BER characteristics of OFDM system, between used PD and not used PD, and superiority is shown by comparing BER characteristics of OFDM system, between used the proposed PD and used some other PDs.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.339-342
• /
• 2002

In this paper, the structure of OFDM system is studied, and causes of inter carrier interference (ICI) are analyzed. Based on analysis, this paper shows a technique to prevent a distortion due to nonlinearity of high Power amplifier. The proposed scheme is a predistorter for high power amplifier linearization in orthogonal frequency division multiplexing (OFDM) system used in wireless local area network(WLAN). This is verified by comparing BER characteristics of OFDM system, between used PD and not used PD.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.718-727
• /
• 2014

In a wireless communications system, a predistorter is often used to compensate for the nonlinear distortions that result from operating a power amplifier near the saturation region, thereby improving system performance and increasing the spectral efficiency for the communication channels. This paper presents a new VLSI design for the polynomial digital predistorter (DPD). The proposed DPD uses a Coordinate Rotation Digital Computing (CORDIC) processor and a PD process with a fully-pipelined architecture. Due to its simple and regular structure, it can be a competitive design when compared to existing polynomial-type and approximated DPDs. Implementing a fifth-order distorter with the proposed design requires only 43,000 logic gates in a $0.35{\mu}m$ CMOS standard cell library.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.32-38
• /
• 2007

This paper represents a Doherty amplifier (DPA) with analog predistorter (PD) to improve the linearity of the DPA while preserving the high efficiency. A third-order PD cancels fifth-order intermodulation (IM5) as well as third-order intermodulation (IM3) components by their same phase difference in the PD and DPA. This is accomplished by independently controlling their phase by using the phase-controlled error generator in the PD. Also, we confirm the phase-control ability of the error generator experimentally with a simple and accurate phase measurement setup. For experimental verification, a third-order PD has been implemented and tested in a 180-W DPA at the wide-band code division multiple access (WCDMA) band of 2.11-2.17 GHz. Two-tone test results show that significant cancellation of IM3 and IM5 components can be obtained. For four-carrier WCDMA applications, significant adjacent channel leakage ratio (ACLR) improvement is achieved over a wide range of output power levels. This technique is cost-effective and convenient due to its simple structure, compact size, and three control parameters.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.118-121
• /
• 2003

Generally, the repeater in CDMA(Code Division Multiple Access) included HPA(HI-Power Amplifier) to amplifier communication signals. Also , HPA contained PD(Predistortor) to maintain the linearization of amplifier characteristics. A configuration component of PD have been used electricity nonlinear devices such that diode. But this diode takes many influences at the circumstance temperature. Consequently, it can't maintain output linearization, and drop the communication quality. The manufacturer set bias of the circuit to the manual at the first out of ware-house low But the Q-point changes according to the change of the high temperature or low temperature. Therefore, we designed a system to maintain the Q-point by FDM(Fuzzy Decision Maker) in this paper.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.283-286
• /
• 2003

Generally, the repeater in CDMA(Code Division Multiple Access) included HPA(HI-Power Amplifier) to amplifier communication signals. Also, HPA contained PD(Predistortor) to maintain the linearization of amplifier characteristics A configuration component of PD have been used electricity nonlinear devices such that diode. But this diode takes many influences at the circumstance temperature. Consequently, st can't maintain output linearization, and drop the communication Duality. The manufacturer set bias of the circuit to the manual at the first out of ware-house low. But the Q-point changes according to the change of the high temperature or low temperature. Therefore, we designed a system to maintain the Q-point by FDM(Fuzzy Decision Maker) in this paper.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.159-160
• /
• 2007

Two analog predsitorters (PDs) using the mixing operation are proposed to compensate for the memory effects of the power amplifier and then significantly cancel IM3 components with the independent control of IM3 terms. In the first PD, IM3 terms are generated by using mixing operation of low frequency terms. In the second PD, the double mixing operation of the fundamental components is used. For a two-tone signal with 20-MHz tone spacing, the notable IM3 suppression is achieved over a whole output power range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.959-966
• /
• 2006

This paper proposes a new concept about dual band predistortion linear power amplifier(PD LPA) using diplexer for digital cellular ($f_o$=880 MHz) and IMT-2000($f_o$=2,140 MHz) base stations. The diplexer is composed of low pass filter having defected ground structure(BGS) microstrip line and high pass filter having high-Q lumped capacitors and distributed elements. The proposed predistorter adopts a reflection type intermodulation signal generator with 3 dB hybrid coupler for good reflection characteristic. for a forward link one carrier CDMA IS-95A 1FA and WCDMA 1FA signal, the proposed dual band PD LPA shows the adjacent channel leakage ratio(ACLR) improvement about 10 dB and 9.36 dB for digital cellular and IMT-2000 band, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.1-10
• /
• 2005

In this paper, we proposed predistortion algerian that can compensate temperature distortion by digital. Predistortion algorithm produces compensation value of distortion by temperature as well as system nonlinear distortion by input level, and warps beforehand signal of baseband. To prove excellency of such algorithm we applied predistortion algorithm to Saleh's high power amplifier model, and did computer simulation. As a result, P1dB increased about 0.5 dBm phase shift reduced about $0.8^{o}$ than existent the A&P PD, and predistiortion algorithm to apply temperature compensation techniques improved P1dB about 2dBm and stabilized phase shift by about $0.1^{o}$ low. When approved UMTS's sample signal to this amplifier, IMD3 of amplifier decreased 10dBm than is no temperature compensation techniques, and reduced 19dBm than signal that is no distortion.