• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
• /
• pp.300-303
• /
• 2006

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.121-124
• /
• 2009

In this paper, the techniques and design focus of flexible gain coltrol of LAN(Low Noise Amplifier) using the TSMC 0.18um CMOS process. The design frequency set up a standard on 2.4GHz that is used in Zigbee system. The design concepts a basic Cascode LNA techniques and a swiching circuit consisted of 4 NMOS of load resistance, which convert the output impedenceby tuning on or off. The result show the gain change by NMOS operated swich. The simulation result is that Gain is 14.07dB-16.79dB and NF(Noise Figure) is 1.06dB-1.09dB.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.415-418
• /
• 2007

This paper presents the design and analysis of LNA-Mixer for 2.45GHz RFID reader. The LNA is implemented by PCSNIM method for low power consumption. The Mixer is implemented by using the Gilbert-type configuration, current bleeding technique, and the resonating technique for the tail capacitance. The connection between the two designed circuits is made by active balun. This LNA-Mixer has about 35dB for -40dBm input RF power, LO power is 0dBm and RF frequency is 2.45 GHz and IIP3 is -4dBm. The layout of LNA-Mixer for one-chip design in a $0.18-{\mu}m$ TSMC process has 2.6mm ${\times}$ 1.3mm size.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1982-1987
• /
• 2007

This paper presents the design and analysis of LNA-Mixer for 2.45GHz RFID reader. The LNA is implemented by PCSNIM method for low power consumption. The Mixer is implemented by using the Gilbert-type configuration, current bleeding technique and the resonating technique for the tail capacitance. The connection between the two designed circuits is made by active balun. This LNA-Mixer has about 22dB gain and 8.5dB Noise Figure for -50dBm input RF power, LO power is 0dBm, RF frequency is 2.45 GHz and IF frequency is 100kHz. The layout of LNA-Mixer for one-chip design in a 0.18-um TSMC process has $2.5mm{\times}1.0mm$ size.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1601-1602
• /
• 2006

A cascode low noise amplifier(LNA) for a 2.45GHz RFID reader is designed using 0.25um CMOS technology. There are four LNA design techniques applied to the cascode topology. In this paper, power-constrained simultaneous noise and input matching(PCSNIM) technique is used for low power consumption and achieving the noise matching and input matching simultaneously. Simulation results demonstrate a noise figure of 2.75dB, a power gain of 10.17dB, and a dissipation power of 8.65mW with 1V supply.

• 정보통신설비학회논문지
• /
• 제9권4호
• /
• pp.141-146
• /
• 2010

In this paper, bandgap reference PTAT(Proportional to Absolute Temperature) circuit and flexible gain control of LNA(Low Noise Amplifier) which is usable in Zigbee system of 2.4GHz band are designed by TSMC $0.18{\mu}m$ CMOS library. PTAT bandgap reference circuit is proposed to minimize the instability of CMOS circuit which may be unstable in temperature changes. This circuit is designed such that output voltage remains within 1.3V even when the temperature varies from $-40^{\circ}C$ to $-50^{\circ}C$ when applied to the gate bias voltage of LNA. In addition, the LNA is designed to be operated on 2.4GHz which is applicable to Zigbee system and able to select gains by changing output impedance using 4 NMOS operated switches. The simulation result shows that achieved gain is 14.3~17.6dB and NF (Noise Figure) 1.008~1.032dB.

• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.220-223
• /
• 2016

본 논문에서는 캐스코드(cascode) 구조에 트랜지스터를 추가하여 잡음 특성을 유지하면서 높은 선형성을 갖는 저잡음 증폭기 구조를 제안하고 설계하였다. 제안한 구조는 트랜지스터의 사이즈 최적화를 통해 잡음원을 최소화 했으며, 전류원분리(current bleeding) 효과를 주어 선형성을 개선하였다. 저잡음 특성에 유리한 $0.5{\mu}m$ pHEMT 공정을 이용해 제작된 저잡음 증폭기는 1.8~2.6 GHz의 동작 대역에서 30.8 dBm의 $OIP_3$, 15.0 dB의 이득, 1.1 dB의 NF, 11.6 dB/10.4 dB의 입출력 반사 손실 특성을 보였다.