• International Journal of Quality Innovation
• /
• 제4권1호
• /
• pp.160-174
• /
• 2003

This study researched an enterprise resources planning (ERP) implementation project at a printed circuit board (PCB) manufacturer. In depth research was achieved by participating and observing in an implementation project at an actual PCB manufacturer. It is hoped that this study will contribute a valuable reference resource for future PCB manufacturers that wish to select or implement ERP systems. The first step in implementing ERP software is to set a clear target. At the same time, the tasks of each department and the system of cooperation between departments must be clearly defined. In this way, the cycle time of each flow and the accuracy of data will both be improved. In order to ensure smooth implementation of an ERP project, the followings are key factors: (1) an ERP system that suits the PCB industry; (2) effective project management; (3) effective project cost/budget control; (4) project problem management system; (5) comprehensive implementation method and information technology (IT), etc. By keeping to these principals, Company A achieved rapid transactions, and lower total cycle times and inventory levels, and other such benefits that had been predicted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1853-1856
• /
• 2003

Multi-layer printed circuit board(PCB) is being used widely for the product with relatively complex circuits such as TV, VTR and FAX. With the rapid enlargement of electronic and IT industry, the hole machining technology on multi-layer PCB is increasingly required to improve. Thus, the micro drilling with ultrasonic vibration can be a good method for hole machining. Unlike conventional drilling, ultrasonic vibration applied drilling introduces less wear and fracture of not only tool but also internal surface of workpiece due to little cutting resistance, thus, machinability can be improved. The experiment is conducted through the comparison between the results of conventional drilling and ultrasonic micro drilling as well as among each results by the variation according to not only feed rate of drill but also amplitude and frequency of ultrasonic vibration. The multi-layer PCB consists of 6 layers and ${\Phi}$0.3 diameter drill was used. As a result, it was found that the state of internal surfaces of holes on multiple layer PCBs is improved by the application of ultrasonic vibration.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 1999년도 추계 기술심포지움 논문집
• /
• pp.7-10
• /
• 1999

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.159-165
• /
• 2014

On this work, the importance of industrial ventilation was investigated and examined the theoretical point and problems about general ventilation of factory exposed on high temperature during summer. As a case study, the ventilation planning of the printed circuit board (PCB) etching process for an electronic company was carried out and each of those characteristics were compared by installing actual ventilation systems and measuring the changing state of the working environment in accordance with ventilation method during summer. The purpose of the study is to present an efficient ventilation method for a factory with a closed structure under high temperature environment. In summary, for a factory with a sealed structure such as the target PCB manufacturing factory in this study, the forced supply and exhaust method was the most appropriate ventilation method for maintaining a low.

• 마이크로전자및패키징학회지
• /
• 제19권3호
• /
• pp.1-7
• /
• 2012

Electroplating technology is widely used in semiconductor microelectronic industry. With the development of semiconductor integrated circuit to high density and light-small scale, Extremely high quality and plated uniformity of the deposited metals are needed. Simulation technique can help to obtain better plating results. Although a few plating simulation softwares have been commercialized, plating simulation is not widely prevalent in Korea. In this paper, principle of electroplating and mathematical modeling of plating simulation are discussed. Also introduced are some cases enhancing plating thickness uniformity on leadframe, PCB and wafer by using plating simulation.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.394-401
• /
• 2003

We consider a PCB grouping problem arising from the electronic industry. Given a surface mounting device, several types of PCBs and a number of component feeders used to assemble the PCBs. the optimization problem is the PCB grouping problem while minimizing setup time of component feeders. We formulate the problem as an Integer programming model and propose a column generation approach to solve the Integer programming formulation. In this approach we decompose the original problem Into master problem and column generation subproblem Starting with a few columns in the master problem. we generate new columns successively by solving subproblem optimally. To solve the subproblem. we use a branrh-and-rut approach. Computational experiments show that our solution approach gives high quality solutions in a reasonable computing time.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.57-57
• /
• 2015

전해동박(Electrodeposited Copper Foil)은 전기도금 공정으로 제조되는 얇은 구리 포일로서, 주로 TV, PC, 스마트폰 등 전자제품의 인쇄회로기판에서 전기신호를 전달하는 회로소재로 사용이 되며, 최근에는 모바일 IT, 전기자동차, 지능형 로봇, 그린 에너지 산업 등에서 필수적으로 적용되는 소재로 이용이 급증하고 있는 핵심소재이다. FPCB/PCB용 전해동박은 최근 휴대폰, PC와 더불어 전 세계적으로 열풍이 불고 있는 스마트폰, 태블릿 등의 최신 전자 모바일기기의 보급이 가속화됨에 따라 해당 제품들의 다기능화, 고집적화가 진행되고 있으며, 5G 이후의 Mobile 기기를 중심으로 하는 차세대 전자기기의 소재 분야의 선점을 위해서 광폭(600 mm 이상) 제품 제조가 가능한 전해 동박으로 다양한 표면처리의 $18{\sim}2{\mu}m$ 급의 얇은 두께를 갖는 경제성이 확보된 고특성 동박이 필요로 되는 상황이다. 이와 더불어 PCB/FPCB에서 요구하는 동박기술의 소개 및 현재 연구 개발 Trend를 소개하고자 한다.

• 디지털융복합연구
• /
• 제15권7호
• /
• pp.223-229
• /
• 2017

유럽, 미국을 비롯한 일본 등 선진 업계에서는 오랜 기간의 시험을 거쳐 충격계수의 시험결과를 보유하고 있으며, 장비를 설계할 때 이를 적용하여 구조물의 안정성을 확보하고 있다. 그러나 국내 산업체의 실정으로는 실제 구조물이 받는 여러 가지 동적인 외력에 의한 영향을 시험을 통해 충격계수를 확보하기에는 많은 비용과 시간이 소요되기 때문에 선진업체에서 제공하는 충격계수를 활용하여 장비를 설계하고 있다. 본 논문에서는 유한요소해석 프로그램인 NX/NASTRAN을 이용하여 반도체 검사 장비인 PCB Handler의 정하중해석과 충격하중에 대한 과도응답 해석을 진행하고, 변위 결과를 비교하는 방법으로 충격계수를 산출하였다. 충격계수 산출 방법은 일본 구조 구격에서 사용하고 있는 방법을 적용하였으며, PCB Handler가 검사를 위해 급출발 또는 급정지 시 충격계수는 1.27로 산출되었다. 해석으로 얻어낸 충격계수는 향후 장비의 구조개선과 기존장비를 기반으로 제품 개발 시 사용할 수 있어 업계에 도움이 될 것으로 판단된다.

• 자원리싸이클링
• /
• 제26권4호
• /
• pp.9-18
• /
• 2017

최근 전자산업의 급격한 성장으로 전자부품스크랩의 발생량 역시 빠르게 증가하고 있다. 특히 전자부품스크랩의 구성부품 중 인쇄회로기판(PCB)은 금, 은, 구리, 주석 및 니켈 등 일반금속부터 귀금속 및 희소금속까지 포함하고 있는 중요한 재활용 대상이다. 하지만 국내에는 일부 대기업을 중심으로 한 PCB 처리 및 재활용 기술이 상용화되어 있으며 그 외 처리량에 대해서는 정확하게 집계되지 않고 있는 실정이다. 이에 따라 몇몇 도시광산 업체 및 연구소, 대학교를 중심으로 기존 대기업 중심의 상용화 공정 외에 PCB로부터 유가금속을 회수하고 원료로 재사용하는 연구가 진행되고 있다. 따라서 본 연구에서는 국내의 폐 PCB의 처리 및 회수현황과 재활용 기술 동향을 분석하였고, 이를 통해 PCB 폐자원의 자원순환 활성화에 기여하고자 하였다.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.