• 한국축산식품학회지
• /
• 제44권3호
• /
• pp.684-698
• /
• 2024

We investigated Cissus quadrangularis L. powder (C) use as a natural additive to Tteokgalbi, a traditional Korean meat-based dish. Five distinct Tteokgalbi samples were treated: one without any additives (negative control, NC), one with 1.00% C (C1), 2.00% C (C2), 4.00% C (C3), and 0.10% ascorbic acid (positive control, PC). C addition resulted in changes in composition, quality, and sensory attributes. Moisture content decreased with higher C levels; crude protein varied among the groups, with C1 having the highest crude protein levels and C3 the lowest. Crude fat decreased with increasing C concentration, whereas the carbohydrate content increased. The water-holding capacity notably decreased in the C3 group, resulting in increased cooking loss with higher C concentrations. C treatment altered color and texture, reducing CIE L^* and increasing CIE a^* before cooking and increasing CIE L^* and CIE a^* after cooking. CIE b^* decreased before cooking but increased thereafter. C-treated Tteokgalbi was less cohesive, chewy, and brittle compared to the NC. The C treatment increased the total phenolic and flavonoid contents and enhanced radical scavenging capacities. It also affects storage characteristics, lowers pH, and increases 2-thiobarbituric acid reactive substances values. The microbial counts were lower in C2 and C3 after 11 days. These findings suggest the potential use of C as a natural meat additive.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권6호
• /
• pp.981-991
• /
• 2020

Objective: To evaluate calcium stearoyl-2 lactylate (CSL) performance as an exogenous emulsifier together with lipase for broiler diets. Methods: In total, 252 one-day-old Ross 308 broiler chickens were allocated in a completely randomized design to give 6 replications per treatment with 7 birds in each cage. There were six dietary treatments representing a 2×3 factorial arrangement consisted of two energy levels (standard energy [positive control, PC] and -100 kcal/kg of the requirement level [negative control, NC]) and three dietary treatments (without additives [CON], CON+CSL [CSL], and CON+CSL+lipase [CSL-Lipase]). Corn and soybean meal-based experimental diets containing vegetable oil were formulated. Growth performance, blood parameters, visceral organ weights, ileal morphology, nutrient digestibility, and cytokine gene expression were measured. Results: Birds fed a diet including CSL increased (p<0.05) lipase level in blood compared to birds fed a diet including CSL-Lipase on day 21. Similarly, higher (p<0.05) liver weight was observed in birds fed a diet including either CSL or CSL-Lipase on day 21. Birds fed NC diet with CSL improved (p<0.05) nutrient digestibility compared to the NC diet on day 21. However, birds fed a diet supplemented with CSL or CSL-Lipase did not affect (p>0.05) the weight gain, feed efficiency, ileal morphology, and cytokine concentrations during the experiment period, regardless of dietary energy levels. Conclusion: Our results indicated that CSL has a role in improving nutrient digestibility in young birds when supplemented to a corn-soybean meal based broiler diet.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.399-404
• /
• 2001

In CNC machining, a 3D(3-dimension) linear segment and a 2D(2-dimension) circular arc are general forms given by CAD/CAM system. Generally, the 2D circular arc machining is processed using dividing into some linear segments. A 3D circular arc also don't exist in the standard form of NC data. This paper present a algorithm and method for real-time machining of a circular arc(not only the 2D one, but also the 3D one). The 3D circular arc machining is based on the 2D circular arc machining. It only needs making a new coordinate system, converting given 3D points(a start point, a end point, and a center point of a 3D circular arc) into points of the new coordinate system, and processing a inverse transformation about a interpolated point. The proposed algorithm was implemented and simulated on PC system. It was confirmed to give a gcod result.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.109-115
• /
• 2004

Polishing process has been applied to get extremely fine surfaces, e.g., mirror surfaces such as optical mirrors, lens, molds and etc. Nowadays not only fine surface quality but also submicron order of dimensional accuracy is required for many applications. To meet the requirements polishing process should be provided with an active control of polishing pressure especially for automation of polishing process. In this paper a study on development of an active polishing pressure control system has been presented. A new type of tool assembly has been developed to facilitate the control. The tool is attached to an axis of a polishing machine with a coil spring and control of the polishing pressure is done by the position control of the axis, which needs no additional actuator. The polishing pressure is successfully measured by the measurement of the spring deformation. Control specifications were quantitatively considered by weighting functions and a controller was designed by using loop-shaping technique based on the no synthesis. Some experiments have been executed on a polishing machine with a PC-NC controller. It is shown that the results were coincident well with the theoretical analyses and satisfied the design specifications.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.156-163
• /
• 2006

The purpose of this study is to improve the machining of free-formed NURBS surfaces using newly defined G-codes which can directly deal with shapes defined from CAD/CAM programs on a surface basis and specialize in rough and finish cut. To this purpose, a NURBS surface interpolation system is proposed in this paper. The proposed interpolation system includes online tool-path planning, real-time interpolation and feedrate regulation considering an effective machining method and minimum machining time all suitable for unit NURBS surface machining. The corresponding algorithms are simultaneously executed in an online manner. The proposed NURBS surface interpolation system is integrated and implemented with a PC-based 3-axis CNC milling system. A graphic user interface (GUI) and a 3D tool-path viewer which interprets the G-codes for NURBS surfaces and displays whole tool-paths are also developed and included in our real-time control system. The proposed system is evaluated through actual machining in terms of size of NC data, machining time, regulation of feedrate and cutting force focused on finish cut in comparison with the existing method.

• Animal Bioscience
• /
• 제35권1호
• /
• pp.87-95
• /
• 2022

Objective: This study was conducted to investigate the effect of associating calcium butyrate with tannin extract, compared to an antimicrobial on the growth performance, incidence of diarrhea, intestinal histology, immune-expression of cyclooxygenase-2 (COX-2) and tumor necrosis factor α (TNF-α) in piglets. Methods: Seventy-two piglets (36 barrows and 36 gilts) weaned at 28±2 d and initial body weight of 7.17±1.07 kg were allocated to 3 treatments in a randomized complete block design with 8 replicates per treatment and 3 animals per experimental unit. Treatments were composed of NC, negative control: basal diet without additives; PC, positive control: basal diet + 40 mg/kg of colistin sulfate; or BT, basal diet + calcium butyrate + tannin extract. The butyrate and tannin inclusion levels were 0.15% in the pre-starter phase and 0.075% in the starter phase. Incidence of diarrhea was monitored daily, and on d 14 and 35 of experiment, 1 animal from each experimental unit was slaughtered to collect intestinal samples. Results: No significant differences were observed for growth performance. The butyrate-and tannin-based additive resulted in reduced (p<0.05) incidence of diarrhea in piglets during d 1 to 14 and d 1 to 35 in comparison with the other treatments. Piglets that consumed the diet containing the calcium-butyrate and tannin showed a lower (p<0.05) crypt depth in the duodenum than those receiving the NC treatment at 14 d of experimentation. The BT treatment provided a lower (p<0.05) immune-expression of COX-2 at 14 d and TNF-α at 35 d in the duodenum. Conclusion: Association between calcium butyrate and tannin extract resulted in a significant decrease in the incidence of diarrhea and inflammatory process in the duodenum of piglets. Therefore, calcium-butyrate combined with tannin could be a part of an alternative program to reduce the use of antimicrobials in the diet of weaned piglets.

• Journal of Microbiology and Biotechnology
• /
• 제10권4호
• /
• pp.522-528
• /
• 2000

A total of about 300 fungal isolates from forest havitats were screened for inhibitors of tobacco mosaic virus (TMV) infection using its local lesion host, Nicotiana tabacum cv. Xanthi nc. Ine of the isolates, 14T, showed a strong activity against TMV infection, and was identified as an Apiocrea sp. based on its morphological characterstics. Rice was an optimum culture medium for its fermentation, and two antiviral compounds, KGT 141 and KGT 142, were resolved from the rice culture through column chromatography, TLC, and HPLC. By NMR and FAB-MS, the two compounds were identified as chrysospermins B (KGT 141) and D (KGT 142), both of which are peptaibols with 19-mer amino acids possessing an acetylated N-terminus and a hydroxy-amino acid (tryptophanol) at the C-terminus. Both compounds showed inhibitory activities against TMV infection, but chrysospermin D showed the stronger activity than chrysospermin B. The former of $100{\;}\mu\textrm{g}/ml$ and 54.7% at $10{\;}\mu\textrm{g}/ml$, respectively. Furthermore, the chrysospermins were highly cytotoxic toward cancer cell lines of PC-3 (prostrate) and K562 (leukemia), and inhibited growth of the Gram-positive bacteria tested, especially the plant pathogenic bacterium Corynebacterium lilium. To the best of our knowledge, this is the first report on the inhibition of plant virus infection by antimicrobial peptaibols.

• Animal Bioscience
• /
• 제35권11호
• /
• pp.1689-1697
• /
• 2022

Objective: The aim of this study was to compare the effects of three kinds of organic acid (OA) products on the growth performance, intestinal characteristics and morphology, and cecal microflora in broilers fed a corn-soybean meal meal diet. Methods: A total of 420 one-day-old male Cobb 500 broilers with an average initial body weight of 49.11±1.02 g were used in this 42-day experiment. Birds were randomly allotted to one of five treatments (7 replicates with 12 birds per replicate). Treatments consisted of negative control (NC), basal diet; positive control (PC), basal diet+100 mg/kg of Aviramycin; OA1, basal diet+500 mg/kg of OA product 1; OA2, basal diet+1,000 mg/kg of OA product 2; and OA3, basal diet+1,200 mg/kg of OA product 3. Results: The results indicated that OA product addition had no effect on growth performance parameters, such as body weight gain, feed intake, and feed conversion ratio, from days 1 to 14, 15 to 28, and 0 to 42, or on the pH values of the intestine, intestinal weight, or intestinal weight to body weight ratio. The intestinal morphology in terms of villus height and crypt depth were affected by dietary supplementation of OA products, respectively. Furthermore, dietary addition of OAs had positive influences on the maintenance of the cecal microflora based on the results of 16S rRNA analysis. Conclusion: Dietary inclusion of three kinds of OA products all benefit broilers, but the mode of action may be different. This study provides a basis for the application of OA products used in the poultry industry.

• 한국가금학회지
• /
• 제43권1호
• /
• pp.21-29
• /
• 2016

A total of 144 one-day-old male broilers (ROSS ${\times}$ Ross 308) ($42{\pm}0.1g$) were used in a completely randomized design and allotted to one of three dietary treatments to give 6 replicates per treatment (8 birds per cage). The three watery dietary treatments were 1) a corn-soybean meal-based relation [Negative control (NC); no antimicrobial compounds added] with tab water, 2) 8 ppm liquid-alpha-lipoic acid [Positive control (PC)] or 3) 100 ppm liquid-resveratrol. All dietary treatments were continuously provided as a liquid form. Birds were housed in a battery cage (n=48), and were offered liquid dietary treatments at all times. The ambient temperature was maintained at $32{\pm}1^{\circ}C$ for the first 3 weeks and decreased gradually to $28{\pm}1^{\circ}C$ by the end of the experiment (d 35) to induce moderate heat stress. One bird per pen (n=6) was euthanized via cervical dislocation at day 21 to obtain terminal ileum to measure villous height and crypt depth, while another bird per pen (n=6) was similarly euthanized at day 35 and used to harvest breast meat and drumsticks to evaluate meat quality traits. Birds fed liquid-resveratrol did not improve (P>0.05) body weight and average daily gain compared with those fed other dietary treatments from day 1 to day 35. Birds fed liquid-resveratrol had no effect (P>0.05) on villous height compared with birds were in other dietary treatments at day 21. Liquid-resveratrol had no effect (P>0.05) on thiobarbituric acid reactive substance (TBARS) in drumsticks compared with other dietary treatments at day 35. Furthermore, birds fed liquid-resveratrol had no effect (P>0.05) on DPPH radical scavenging activity both in breast meat and drumsticks compared with those fed other dietary treatments at day 35. Morphological changes of ileum were not observed by immunofluorescence, and the level of occludin protein from ileum extracts also did not differ among groups. Our results suggested that liquid form of antioxidant compounds used in the current study such as alpha-lipoic acid (8 ppm) or resveratrol (100 ppm) did not improve growth performance, meat quality traits and histology of terminal ileum compared with those fed negative control in broiler chickens under moderate heat stress for 35 days.