• 제목/요약/키워드: PC to RC

검색결과 115건 처리시간 0.023초

앵글을 전단연결재로 사용하는 합성보의 휨성능 (Flexural Capacity of the Composite Beam using Angle as a Shear Connector)

  • 김영주;배재훈;안태상;최종권
    • 한국강구조학회 논문집
    • /
    • 제27권1호
    • /
    • pp.63-75
    • /
    • 2015
  • 본 연구에서는 앵글을 전단연결재로 사용하여 합성보의 휨성능을 실험적으로 조사하였다. 실험의 주요변수는 앵글의 크기와 간격 및 콘크리트가 합성 전과 합성 후의 휨에 대한 전체적인 거동을 실험적으로 검증하였다. 또한 중공PC슬래브와 일반RC슬래브와 같이 사용하였을 때의 휨성능을 비교하였다. 이를 종합적으로 판단하면, 앵글을 전단연결재로 사용한 합성보의 휨성능은 앵글의 간격을 적절하게 배치시키면 예상내력보다 25-55% 이상의 공칭내력을 보유하고 있음을 확인할 수 있었다. 예상한 바와 같이, 합성보의 내력에 미치는 앵글의 변수를 살펴보면 앵글의 크기가 클수록 앵글의 간격이 좁을수록 합성보의 내력이 상승함을 확인할 수 있었다. 또한 중공PC슬래브에서도 앵글을 사용한 합성보의 성능이 잘 발휘됨을 실험적으로 검증하였다.

반복 횡하중을 받는 유공 PC 기둥 접합부의 구조성능 평가 (Evaluation of Structural Performance the Hollow PC Column Joint Subjected to Cyclic Lateral Load)

  • 서수연;윤승조;이우진
    • 콘크리트학회논문집
    • /
    • 제20권3호
    • /
    • pp.335-343
    • /
    • 2008
  • 본 연구는 프리캐스트 콘크리트 모멘트 골조 시스템의 시공 성능 향상과 접합부 내진성능 향상을 위하여 새로운 개념의 PC 기둥 부재와 시공 공정을 개발하였다. 이 PC 기둥은 원심력으로 제조되어 내부에 공간이 비워있는 중공관 PC 부재로서, 이 기둥을 활용할 경우, 중공관을 통하여 현장타설 콘크리트와 동일한 일체성을 확보할 수 있다. 본 연구는 제안된 PC 기둥 접합부의 내진성능을 평가하기 위하여 반복가력 시험을 수행하였다. 실험체는 기둥 주철근의 연속성을 확보하기 위하여 기계적 이음과 겹침이음을 활용한 2가지 이음 방법을 적용하였으며, PC 기둥의 띠철근 배근 형태를 고려하여 실물 크기의 4개 실험체를 계획 실험하였다. 반복 횡력 시험 결과, 제안된 HPCC 기둥을 활용할 경우, 현장타설 RC 시스템의 접합부 내진성능을 충분히 확보할 수 있는 것으로 나타났다.

국내 PC 아파트 접합부 누수 방지를 위한 마감상세 분석 (Analysis of finishing details to Prevent leakage of PC Apartment Joints in Korea)

  • 김태호;고효진
    • 한국공간구조학회논문집
    • /
    • 제21권4호
    • /
    • pp.81-89
    • /
    • 2021
  • Recently, interest in OSC(Off Site Construction) is increasing due to the trend of a decrease in skilled workers and an increase in labor costs. In this regard, PC(Precast Concrete) is being reviewed for apartments, the most common type of housing in Korea. As the biggest concern for PC apartment houses, civil complaints such as inter-floor noise and leakage were presented. In this study, the details of the joints were reviewed based on the past cases of PC apartments, and the details of the recently constructed or planned PC apartments were investigated. Through this, the leakage path in the past was analyzed through the existing research literature and data. And wall type RC and PC apartment joint leakage test was performed and we found the needs for a detail of waterproof steps, sealant. Also, joint details were investigated for a rahmen type apartment housing under construction. At last, A discussion was conducted on the direction for a detailed proposal of an improved joint in the future.

농업용저수지 재개발 우선순위 산정시스템 개발 (Development of the Priority Decision System for Redevelopment of Agricultural Reservoir)

  • 김해도;김선주;김필식
    • 한국농공학회논문집
    • /
    • 제53권2호
    • /
    • pp.45-52
    • /
    • 2011
  • This study is to develop a Priority Decision System for Redevelopment (PDSR) which is able to decide the priority for redevelopment of agricultural reservoirs. The major scopes of this research are to make the related GIS data like hydrologic unit map and other thematic maps to determine the suggested priority index (PI), and to develop the PDSR handling the GIS data and calculating weighing factors for the PI. In order to make the weighing factor decision module, the AHP technique was adopted. The result of the weighing factor calculation was showed PC (Possibility Criteria) and RC (Restriction Criteria) were 76% and 24% respectively. Which means that most of the specialist selected PC category prior to RC because of whom to mostly of major technique. So, in order to make more objective result, the selection of specialists is important like environmental activists or local residents and so on. The product from this research can provide more scientific support to decide the priority decision.

PC공법을 이용한 최적의 구조설계 (The Optimal Design of a PC System in HIBRAND)

  • 김종수;박형석;최동섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.298-301
    • /
    • 2006
  • The HIBRAND located in Yangjaedong, Seochogu, Seoul is a large complex shopping center of total space 48,000 p'yongs which consists of a nineteen-story business facility and a six-story sale facility. In the case of a big construction work in the downtown, they are suffered much difficulty by construction period and working space lack. They, however, can satisfy construction period, constructability and quality using a PC system in HIBRAND. Also, we maximized the advantage of each material being the abreast of a RC and steel structure method partially and devised a reasonable copula. A PC system with advantages of construction period, constructability and quality assurance should be actively practiced to big downtown construction work.

  • PDF

U형 강봉을 사용한 PC 계단 접합부 개발 (Development of Improved PC Stair Connections Using U-Rods)

  • 장극관;서대원;천영수
    • 토지주택연구
    • /
    • 제2권4호
    • /
    • pp.509-516
    • /
    • 2011
  • 프리캐스트 콘크리트는 현장작업을 최소화하고 공사품질을 보장할 수 있으며 공사기간을 단축시킬 수 있는 장점을 갖고 있다. 특히 계단실의 경우 재래식 거푸집을 사용할 경우 골조공사의 품질저하와 다수의 인력투입에 따른 생산성의 저하 및 시공의 어려움 등의 문제점이 있다. 본 연구에서는 PC 계단 접합부 상세를 개발하고, 제안한 접합부의 일체성확보와 사용성 및 안전성을 검증하기 위해 구조성능실험을 수행하였으며, 단순 핀접합 실험체에 비해 구속도의 증가, 내력, 강성 및 연성의 증가를 확인할 수 있었다.

Improvement and validation of a flow model for conical vortices

  • Ye, Jihong;Dong, Xin
    • Wind and Structures
    • /
    • 제19권2호
    • /
    • pp.113-144
    • /
    • 2014
  • Separation bubble and conical vortices on a large-span flat roof were observed in this study through the use of flow visualization. The results indicated that separation bubble occurred when the flow was normal to the leading edge of the flat roof. Conical vortices that occur under the cornering flow were observed near the leading edge, and their appearance was influenced by the wind angle. When the wind changed from along the diagonal to deviating from the diagonal of the roof, the conical vortex close to the approaching flow changed from circular to be more oblong shaped. Based on the measured velocities in the conical vortices by flow visualization, a proposed two-dimensional vortex model was improved and validated by simplifying the velocity profile between the vortex and the potential flow region. Through measured velocities and parameters of vortices, the intensities of conical vortices and separation bubble on a large-span flat roof under different wind directions were provided. The quasi-steady theory was corrected by including the effect of vortices. With this improved two-dimensional vortex model and the corrected quasi-steady theory, the mean and peak suction beneath the cores of the conical vortices and separation bubble can be predicted, and these were verified by measured pressures on a larger-scale model of the flat roof.

스마트폰 기반 RF4CE URC 프레임워크의 설계 및 구현 (R-URC: Smartphone based RF4CE Universal Remote Control Framework)

  • 구본현;안태원;박용석;손태식
    • 전자공학회논문지CI
    • /
    • 제47권2호
    • /
    • pp.48-53
    • /
    • 2010
  • RC(Remote Control)기술들은 CE(Consumer Electronics)들에게 사용자의 명령을 전달하고 편리하게 제어할 수 있도록 해주는 기술이다. 그러나 CE 기기의 성능 향상과 새로운 개념의 기기들이 개발됨에 따라 다양한 기기간 통신 필요성과 그러한 기기를 제어하기 위한 진보된 RC 기능에 대한 요구가 증대되고 있다. 그러나 기존의 대표적인 IR 기반의 RC 방식은 거리의 제약과 에너지 소모 등 많은 제약사항을 가지고 있다. 본 논문에서는 이러한 제약사항들을 해결하기 위해, 스마트폰 단말에 RF4CE 표준을 지원하는 R-URC(Smartphone based RF4CE Universal Remote Control Framework) URC 프레임워크를 제안한다. 제안된 URC 시스템은 CE 제어와 관한 RC 표준으로 09년 3월에 발표된 ZigBee RF4CE를 기반으로 설계되었으며, 제안한 시스템의 효율성 검증을 위해 기기들 간의 컨텐츠 공유 및 제어 기능을 실제 LED TV, NotePC, 그리고 스마트폰에 적용한 실험을 수행하였다.

콘크리트의 비틀림 인장강도에 관한 연구 (A Study on Torsional Tensile Strength of Concrete)

  • 박선규
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 봄 학술발표회 논문집
    • /
    • pp.160-165
    • /
    • 1996
  • The tensile of concrete in one of important factor for study of reinforced concrete as well as prestressed concrete structures. In many countries, a numerous experimental studies are being undertaken to investigate correlation between compressive and tensile strength of concrete. This study is focused on identifying the relationship between the compressive strength and torsional tensile strength of concrete and, on crack of RC and PC structure.

  • PDF

Styrene Butadiene Rubber (SBR)/ Carbon Black 복합체의 전기저항 및 전기전도 특성 (Electrical Conduction and Resistance Characteristics of Styrene Butadiene Rubber (SBR) Composites Containing Carbon Black)

  • 김도현;이정희;손호성;이경원
    • Elastomers and Composites
    • /
    • 제33권4호
    • /
    • pp.246-254
    • /
    • 1998
  • Styrene butadiene rubber (SBR)/ 카렬블랙 복합체의 전기저항 특성과 전기전도 특성을 연구하기 위하여 표면저항, 체적저항, point to point 저항, 정전하 소멸시간 및 전기전도 실험을 4종의 카본블랙을 사용하여 실시하였다. 약 50phr의 카본블랙이 첨가되었을 때, 모든 저항값이 급격히 감소하는 임계영역 (Rc)을 나타내었다. 카본블랙이 첨가된 SBR 복합체의 전류밀도는 전기장의 증가에 따라 증가하며, 기울기 (dJ/dE)가 증가하는 임계점 (Pc)이 존재하였으며, 이때의 전기전도기구는 임계점을 기준으로 하여 낮은 전기장 영역에서는 ohmic 전도, 높은 전기장 영역에서는 공간전하 제한전도임을 알 수 있었다.

  • PDF