• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.595-599
• /
• 1989

The effects of phosphatidic acid(PA) on the activity of phospholipase D were examined in detail. The enzyme activity was examined in the liposome system containing phosphatidylcholine and PA, which was suspended in a desired buffer solution by ultrasonication. The substrate of large unilamella vesicle (LUV) state by ultrasonication was more effective on the enzyme activity than that of multilamella vesicle(MLV) by water-bath type sonication. The most effective molar ratio of PC-PA liposome for enzyme activity was found to be 1:0.7. The other optimum conditions were found 5 mM $Ca^{2+}$ ion, pH 6.6, and incubation temperature of $27^{\circ}C. K_m \;and \;V_{max}$ values were estimated to be 1.43 mM and 0.8 $nmole/min/{\mu}g$ protein respectively. These properties in a PC-PA liposome system were compared with those in a PC-SDS mixed micelle system. The effects of other phospholipids and organic phosphates on the enzyme activity were also examined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.199-200
• /
• 2006

Transparent conductive alum mum-doped ZnO (AZO) films have been prepared on polycarbonate (PC), Coring 7059 and Quartz substrates by DC sputtering method at room temperature. Films deposited was evaluated about spectra of X-ray diffraction and transmittance and characteristics of films deposited as kind of substrate was compared. Films deposited showed (002) orientation and all AZO films are transparent over 80% within the visible wavelength region.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1170-1173
• /
• 2006

Active layer patterned OTFT was obtained on a plastic substrate using the optimal growth condition of pentancene thin films as active layer and parylene thin films as passivation layer. Tranditional photolithography was performed to use a dry etch to pattern the material stack. The pentacene thin film and parylene thin film were deposited onto a plastic substrate using PC-OVD and CVD, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.553-557
• /
• 1999

In order to investigate the optical properties of the $Al_XGa_{1-X}N/GaN$ thin film grown by metalorganic chemical vapor deposition (MOCVD) method, the photoluminescene (PL), photocurrent (PC) and persistent photoconductivity (PPC) measurements were carried out at room temperature. The band gap of the $A1_x$$Ga_{1-x}$N/GaN was determined to 3.70 eV by the PL and PC measurements. The PC measurement on the light illumination from the top of the $A1_x$$Ga_{1-x}$N/GaN thin film provides peaks at 3.70, 3.43, and around 2.2 eV. The PC spectrum by the illumination passing through from the substrate of the sample can be shown at 3.43 eV together with a broad tail band from the GaN band edge to around 2.23 eV. The photocurrent quenching and anomalous PPC decay observed in PPC measurements indicate that metastable electron states are fomed in the band gap of GaN layer to trap electrons which can be tunneled the potential barrier for long recovery time.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.448-452
• /
• 2000

Phospholipase D(PLD) is the enzyme catalyzing the hydrolysis of the terminal phosphcester bond of phospholipid head group to produce phosphatidic acid and the corresponding base. The effect of spermine on the PLD activity of rat brain mitochondrial preparation was investigated. Spermine, in the presence of oleic acid, activates the rat brain mitochondrial PLD, whose effect was further enhanced by the presence of divalent cation, $Ca^{2+}$, $Mg^{2+}$, and $Ba^{2+}$. Among the various monoamines tested, only histamine at the high concentration was effective in activation the PLD. Polylysine increased the PLD activity, particularly, the longer chain of the molecule activated the PLD more effectively. There was no significant difference in the substrate specificity for the PLD activity between phosphatidylcholine(PC) and phoshpatidylethanolamine (PE). This substrate specifitiy is different from the PE specificity reported for the intestinal mitochondrial PLD.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.178-185
• /
• 2016

In this study, we have fabricated light guide plates (LGPs) in thin film form for edge type back light unit (BLU) by using UV imprint lithography. In the LGPs, the pattern of functional resins on PC and PMMA substrates were successfully transferred from original master mold through PVC stamp. Optimized pattern arrays with slowly-sloped density were designed to obtain high brightness and uniformity. We could obtain a relatively improved brightness of $950cd/m^2$ and a uniformity of 87.3% by using the NP-S20 functional resins at an input power of 1.3 W because NP-S20 resin could show high formability after UV hardening process. The LGP prepared on polymethylmethacrylate (PMMA) substrate exhibited higher brightness than that on polycarbonate (PC) substrate because PMMA has lower refractive index resulting in more refraction toward the vertical direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.134-135
• /
• 2006

$AgInS_2$ single crystal thin filmsl was deposited on throughly etched semi-insulator GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $680^{\circ}C$ and $410^{\circ}C$ respectively, and the thickness of the single crystal thin films is $6{\mu}m$. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $AgInS_2$ single crystal thin film, we have found that the values of spin orbit coupling ${\Delta}So$ and the crystal field splitting ${\Delta}Cr$ were 0.0098 eV and 0.15 eV at 10 K, respectively. In order to explore the applicability as a photoconductive cell, we measured the sensitivity ($\gamma$), the ratio of photocurrent to darkcurrent (pc/dc), maximum allowable power dissipation (MAPD), spectral response and response time. The result indicated that the samples annealed in S vapour the photoconductive characteristics are best. Therefore we obtained the sensitivity of 0.98, the value of pc/dc of $1.02{\times}10^6$, the MAPD of 312 mW, and the rise and decay time of 10.4ms and 10.8ms respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.15-22
• /
• 2017

This study focuses on the investigation of bond strength of magnesium potassium phosphate cement mortar(MKPC) according to moisture condition of substrate. Tensile bond test, shear bond test and interfacial bond test are adopted for evaluating the adhesion characteristics of MKPC to conventional cement mortar substrate. The main experimental variables are test methods and moisture levels of substrate. Because the moisture condition of the substrate may be critical to achieving bond, optimum moisture condition for a conventional concrete substrate has evaluated in this study. The results are as follows ; The effects of moisture condition at substrate into the bonding of MKPC are less different than polymer cement mortar and epoxy mortar. But the saturated and surface dry condition is the most appropriate moisture level among the considered, followed by saturated condition and wet condition. Thus, an adequate moisture level of substrate for MKPC is essential for good bond strength.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.126-133
• /
• 1992

This study deals with the crystal growth and the optical characteristics of CdS thin films activatedby silver. CdS:Ag thin films were deposited by using an electron beam evaporation(EBE) technique in vacuumof 1.5X 10-'torr, voltage of 4 kV, current of 2.5 mA and substrate temperature of 250$^{\circ}$C CdS:Ag photoconductivefilms prepared by EBE method show high photoconductivity after annealing at about 550"c for 0.5 h in air andAr gas.The grain size of CdS:Ag thin films annealed in Ar atmosphere (1 atm) was grown over 1 ym and the thicknessof the films is 4-5 pm. The analysis of X-ray diffraction patterns shows that the crystal structures are hexagonal.The diffraction line by (00.2) plane can only be observed, indicating that c-axis of hexagonal grows preferentiallyperpendicular to the substrate. The profiles of photoluminescence spectra of CdS:Ag films show Gaussian typecurves at room temperature, the maximum peak spectral sensitivity of CdS:Ag is located at the wavelength of520 nm.We annealed CdS:Ag thin films in air and Ar vapor in order to make the CdS photoconductors having theintensive photocurrent, the broad distribution of the photocurrent spectrum and the large value of the ratioof the photocurrent (pc) to the dark current(dc). We found that CdS:Ag thin films annealed in air atmospherewas the best one.air atmosphere was the best one.