• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2024-2026
• /
• 2001

This paper propose the new concept and design method of PC based automation in factory automation. In order to apply this system, the essentially proposed three technologies are following - Using the industrial automation control language, recognized by IEC 1131-3 - to apply Windows-NT operation system - to apply the Fieldbus network based on international standards.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.60-68
• /
• 2024

In this study, a hardware-in-the-loop simulation (HILS) environment was established using MATLAB/Simulink to simulate and verify the power performance of a wind turbine. The target wind turbine was selected as the NREL 5 MW model, and modeling was performed based on the disclosed specifications. The HILS environment consists of a PC equipped with a MATLAB/Simulink program, a programmable logic controller (PLC) for uploading and linking control algorithms, and data acquisition (DAQ) equipment to manage wind turbine data input and output. The operation of the HILS environment was carried out as a procedure of operation (PC) of the target wind turbine modeled based on MATLAB/Simulink, data acquisition (PLC) of control algorithms, control command calculation (PLC), and control command input (PC). The simulation was performed using the HILS environment under turbulent wind conditions and compared with the simulation results performed under the same conditions in the HILS environment using the commercial program Bladed for performance verification. From the comparison, it was found that the dynamic simulation results of the Bladed HILS and the MATLAB HILS were close in power performances and the errors in the average values of rotor rotation speed and power generation between the two simulations were about 0.44 % and 3.3 %, respectively.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.580-582
• /
• 2008

The object of this paper is develope the PC based controlled high voltage power supply and studies 1.2kW(120kV, 10mA) pulse power X-ray generator possible to adapt fluoroscopy of Dental CT X-ray generator and industrial X-ray pulse power equipment. The developed pulse power X-ray generator consisted of mono-block tank include X-ray tube and high voltage X-ray power supply circuit and high voltage control unit with RS232C/422 communication port. The PC control program of pulse power X-ray generator uses LabVIEW, and the size of high voltage transformer and high voltage generator is minimized by high voltage high frequency inverter has 100kHz switching frequency. Also this paper shows result of X-ray tube voltage and tube current correspond to variable load.

• 동력기계공학회지
• /
• 제14권1호
• /
• pp.40-46
• /
• 2010

This paper shows the development process for measuring three-dimensional flow velocity components in a web-browser. The system is developed in an embeddable C/C++ interpreter Ch and Ch-CGI toolkit. The interface for the web-based measurement system consists of a set of web HTML files and Ch files for CGI. All of data in web browser are passed to Ch-CGI script to generate the output of new HTML file. PC-Server and PC-Client can submit measurement parameters and receive the text/graphical results each other. PC-Client can control the test equipment by using a parameters that received from PC-Server. It also can pass the test results between the web-based measurement system. In summary, the designed measurement system is evaluated, the outputs shown well on the web browser.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 춘계학술발표대회
• /
• pp.541-544
• /
• 2006

본 논문에서는 모바일 기기들을 사용하여 언제 어디서나 PC에 접속하여 컴퓨터 시스템을 제어 할 수 있는 시스템을 구현하였다. 이 시스템은.NET과 데이터베이스 기반의 모바일 시스템 설계로 IP address와 데이터베이스를 활용한 모바일 접속을 통하여 PC를 제어하기 위한 모바일 원격 제어 시스템이다. 우선적으로 PC의 전반적인 시스템 제어가 아닌 멀티미디어(음악, 이미지, 동영상 파일)와 Shutdown 실행을 제어하는 기능을 구현하였다.

• 컴퓨터교육학회논문지
• /
• 제5권4호
• /
• pp.79-89
• /
• 2002

기존의 고정 단발기 (PC)에서만 주로 행해지던 각종 다중 사용자 접속 온라인 응용이 최근 PC와 PDA, 휴대폰 등이 공동 작업을 수행하는 멀티 플랫폼 기반 온라인 응용으로 전환되고 있다. 그러나 지금까지 멀티 플랫폼 기반 온라인 응용은 다중 사용자의 공동 데이터의 동시 접근 및 각 클라이언트의 처리 능력과 통신 속도의 비대칭을 고려하지 않아 컨텐츠가 매우 단순한 실정이다. 이 논문에서는 멀티 플랫폼 기반 동시성 제어 기법, 다양한 클라이언트간의 변경 전파 프로토콜, 모바일 클라이언트의 특성을 고려한 객체 관리 기술을 제안하였다. 그리고 멀티 플랫폼 기반 채팅 프로그램을 제작하여 제안한 기법들이 적절히 동작함을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2266-2270
• /
• 2005

In this paper, an internet based control application for dynamical systems is implemented. This implementation is maily targeted for the part of advanced control education. Intelligent control algorithms are implemented in a PC so that a client can remotely access the PC to control a dynamical system through the internet. Neural network is used as an on-line intelligent controller. To have on-line learning and control capability, the reference compensation technique is implemented as intelligent control hardware of combining a DSP board and an FPGA chip. GUIs for a user are also developed for the user's convenience. Actual experiments of motion control of a DC motor have been conducted to show the performance of the intelligent control though the internet and the feasibility of advanced control education.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.750-753
• /
• 2003

In this paper, we have developed the web-based management system for greenhouse teleoperation. The remote control system consists of database, web-server, controller in greenhouse, and clients. The database in the server stores user informations and greenhouse conditions, and is used to manage user login and conditioning data. The management system developed by using Java applet, which is a client program for effective and easy management of greenhouse, monitors the greenhouse in real time. Master and driver boards installed in greenhouse control unit. Database on flowering to collect and analyze data exchanges data with the server. The greenhouse can be managed effectively by timer routine, repeat control within setting time, and algorithm of setting points. Also, the greenhouse conditions can be controlled by manual or remote controller (PC) through web browser in internet. Furthermore, all of the control devices of the greenhouse are managed by remote control using PC and checked via camera installed in greenhouse.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.754-757
• /
• 2003

The implementation of home network systems In ubiquitous computing environments requires middleware that provides a method to control and operate home appliance devices. The Universal Plug and Play (UPnP), which is based on the IPv4 protocol and running on a PC, consists of UPnP devices that provide relevant services and control points that control the devices. However, It is inappropriate to Implement UPnP devices on a PC, since the implementation on a PC requires much space and electrical power. In this paper, a small embedded home network device equipped with UPnP middleware is implemented on an embedded GNU/Linux system running on an ARM9 platform, in order to deal with such problems.