• 전기학회논문지P
• /
• 제56권2호
• /
• pp.99-103
• /
• 2007

In this paper, one type of a security system for panel working is suggested. The industrial Ethernet is used for open-close door control of the working panel and for monitoring the working panel is correct or not. Especially to upgrade the security system, a remote approval function of panel working by using the given approval number, a remote monitoring function for checking the approved panel is currently working or not, and an alarming function for keying the unapproved number or opening the disapproved panel, are added for preventing and reducing the intentional working error. Also the worker and working time are stored in PC automatically in exel file for detecting the working error. To show the possibility of suggested security system. two-working panel system is prepared and studied.

• 한국산학기술학회논문지
• /
• 제10권2호
• /
• pp.287-293
• /
• 2009

본 논문에서는 RF송신기와 수신기를 통하여 데이터를 통신하고, 수신기에 연결된 PC에 설치된 S/W를 이용하여 사용자 인증을 받는 PC 보안 방법을 제안한다. 기존의 PC보안 방법들은 사용자의 수동적인 움직임을 요구하였지만, 제안하는 방법은 PC 가까이에 태그를 소지한 사용자가 있는지 유무 판단을 하여 자동으로 PC를 보호한다. 또한 위조 변조가 불가능하며, 스니핑 공격과 스푸핑 공격에 대해 안전하며, 오판정율도 다른 시스템에 비해 낮아서 안전하다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.77-78
• /
• 2023

As large logistics buildings have high floor heights and long spans, these buildings are designed as PC structures, and large cranes are used to lift PC members. PC erection planning can generally cause errors depending on the field engineer's experience. To solve this problem, a basic analysis method is needed to establish a systematic PC member erection plan. Crane work can be minimized if the trajectory is easily and quickly calculated according to the location of the crane and applied to the site. Therefore, the objective of this study is a basic study of crane trajectory distance calculation for sustainable PC members erection of large logistic building. In this study, a crawler crane commonly used for lifting PC members is limited. The trajectory distance for the PC erection plan was automatically calculated using the algorithm.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.107-114
• /
• 2005

With the recent progress in flexible manufacturing systems (FMS) in industry, increasing attention has been given to Automatic Guided Vehicle (AGV) systems. An AGV is a self-powered unit for transporting materials between stations without needing to be controlled by an operator. Such a system has several sensors to recognize the external state, and it is designed to travel between stations automatically without external assistance. To manage each device automatically in real time it requires a distributed controller with a main computer as the host, as well as a number of micro-controllers. In this study, an AGV system with dual motor drive was constructed. A Pentium 4 personal computer was set up as the main host for the distributed control, and this communicated with other micro-controllers in the management of the motor. The speed of each motor was also controlled by a micro-controller.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.155-156
• /
• 1996

The intercommissural(AC-PC) line is automatically detected for HR and PET images. With the detected AC-PC lines from MR and PET images, fully non-iterative automatic co- registration is accomplished. It provides a new automated method for image co-registration.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.363-366
• /
• 2003

We propose the system that automatically adjusts the white balance on display products to a standard value according to several nations. We replace manual or semi-auto method with fully automatic method using windows application program. And we use RS-232C serial interface to communicate PC with display products which we want to adjust white balance. The PC generates patterns for measuring color information and Color Analyzer measures color and brightness. This value is transmitted through RS-232C serial interface to PC. The PC's algorithm analyzes this information and then decides which RGB Gain value is best for optimal white balance. This RGB Gain value is transmitted through RS-232C serial interface to display products. The modified color value is measured again and feed back to PC. This sequence is repeated until optimum white balance is obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.695-698
• /
• 2000

Round-cornering machines are mainly used for cornering of stiffners for ship buildings. In the present time they have been operated manually by operators. so they are need to be operated automatically without regard to any shapes of stiffners. We developed the automatic round cornering system which consists of CCd Camera, PC and laser diode to detect automatically the edge of stiffners to be processed

• 산업공학
• /
• 제6권2호
• /
• pp.171-181
• /
• 1993

In this study, a process management system is designed that can automatically control the heat treating atmosphere, and a managment software is developed to monitor and control continously the heat treating process using a n interface device. Especially, a communication protocol is developed to control and monitor atmosphere condition, temperature, surrounding gas, and time. The developed interface device, called COMPORT SELECTOR is to send and receive information from PID controllers and PLC via RS-232C communication. This system will reduce manufacturing cost and cycle time, and improve the effectiveness of working process and quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.726-729
• /
• 1991

In this paper it is discussed about the program which makes automatically the preprocessing data on the graphic editor of PC monitor. Three kinds of colors are used in order to make know a boundary_element, in_element, out_element. By initial mesh generation, three kinds of elements are made; the element with three nodes, four nodes, five nodes. The node of boundary element draw a vertical line to the boundary. At that time the element with three nodes is removed and the element with four nodes is changed to the element with four nodes. The domain graphic on this paper is compose of piecewise curves which has many lines and a hole. The data of element is written on the memory of PC computer. The program controls the memory address according to the change of element's quantity; disappearance and addition of element. All this work is operated on the PC computer.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권2호
• /
• pp.95-99
• /
• 2006

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and to inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++ on Windows with easily usable GUI. Using this system, we can automatically measure and inspect the quality of ail feeders in production process by analyzing the measurement results statistically.