• Restorative Dentistry and Endodontics
• /
• 제24권3호
• /
• pp.473-481
• /
• 1999

This study evaluated the shear bond properties of IPS Empress glass ceramic to enamel and dentin surfaces with three ceramic surface treatments, and three resin cements. The influence of thermocycling was also investigated. The purpose of this study was to investigate the influences of resin cements, ceramic surface treatments, and thermocycling on shear bond properties. Ninety freshly extracted, noncarious human molars were selected for this study. The surface treatments of ceramic were etching <5.0% hydrofluoric acid, application of silane coupling agents(Tokuso Ceramic Primer, Clearfil porcelain bond, Monobond-S), and the combination of the two methods. Empress cylinders were bonded to enamel and dentin surfaces with three kinds of resin cements(Bistite resin cement, Panavia 21, Variolink). The specimens were aged in $37^{\circ}C$ distilled water for 24 hours. Half of the specimens were then thermocycled 500times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 15 seconds. Each specimen was debonded in shear mode and measured shear bond properties by using the universal testing machine(Zwick 020, Germany). The data were analyzed by SPSS/PC+(one-way ANOVA, Scheffe' s test and t-test). The results were as follows : 1. Without thermocyling, there was significant difference of shear bond strength to enamel surface between Bistite Resin Cement and Panavia 21 in case of etched and silane-treatment(p<0.05). 2. Without thermocyling, the shear bond strength of a group treated with silane and etching was significantly higher than that of a group treated with silane or etching with the application of Panavia 21 and Variolink(p<0.05). 3. A group treated with etching with the application of Variolink only showed a decrease of shear bond strength after thermocycling(p<0.05).

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.81-85
• /
• 2011

Recently, the electronic parts are to be thinner plate, smaller size, light weight material and CPU, HDD and DRAM in all the parts have been produced on the basis of the high speed and greater capacity. Also, conventional goods have replaced a LED (Light-Emitting Diode) in lighting products so; such industry devices need to have cooling. To maximize all the performance on the heat-radiated products, the area of heat-radiated parts is required to be cooled for keeping the life time extension and performance of product up. Existing cooling systems are using radiant heat plate of aluminum, brass by extrusion molding, heat pipe or hydro-cooling system for cooling. There is a limitation for bringing the light weight of product, cost reduction, molding of the cooling system. So it is proposed that an alternative way was made for bringing to the cooling system. EP (Engineering Plastic) of low-cost ABS (Acrylonitrile butadiene styrene Resin) and PC (Polycarbonate) was coated with brass and the coating made the radiated heat go up. The performance of radiant heat plate is the similar to the existing part. We have studied experimentally on the radiated heat plate for the light-weight, molding improvement and low-cost. From now on, we are going to develop the way to replace the exiting plate with exterior surface of product as a cooling system.

• Advances in concrete construction
• /
• 제6권6호
• /
• pp.659-677
• /
• 2018

The use of some superplasticizers in the production of mortar or concrete influences the hydration kinetic and the amount of total heat. This results in a modification of some properties, namely mortar workability, mechanical strength and durability. Three superplasticizers were used; a polynaphthalenesulfonate (PNS), a melamine resin (PMS) and a polycarboxylate (PC). They have been incorporated into various amount in a standardized mortar based on limestone cement. The aim of this study was to evaluate the rheological, mechanical and Calorimeters properties of this mortar. This will select the most compatible product and more able to be used depending on the climate of the country and the cement used. The PNS is incompatible with this type of cement registering a decrease of strength but the PMS and the PC modify the kinetics of hydration with significant heat generation and improved mechanical strength. The measured heat flow is significantly influenced by the type and dosage of superplasticizer especially for low dosage. Hydration heat and compressive strength of the different mixtures can be evaluated by determining their ultimate values and ages to reach these values where the correlation coefficients are very satisfactory.

• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.164-170
• /
• 2015

Objective: The aim of this study was to compare the shear bond strength (SBS) of orthodontic brackets bonded to zirconia surfaces using three different zirconia primers and one silane primer, and subjected to thermocycling. Methods: We designed 10 experimental groups following the surface treatment and thermocycling. The surface was treated with one of the following method: no-primer (NP), Porcelain Conditioner (PC), Z-PRIME Plus (ZP), Monobond Plus (MP) and Zirconia Liner Premium (ZL) (n=20). Then each group was subdivided to non-thermocycled and thermocycled groups (NPT, PC, ZPT, MPT, ZLT) (n=10). Orthodontic brackets were bonded to the specimens using $Transbond^{TM}$ XT Paste and light cured for 15 s at $1,100mW/cm^2$. The SBS was measured at a 1 mm/min crosshead speed. The failure mode was assessed by examination with a stereomicroscope and the amount of bonding resin remaining on the zirconia surface was scored using the modified adhesive remnant index (ARI). Results: The SBS of all experimental groups decreased after thermocycling. Before thermocycling, the SBS was ZL, $ZP{\geq}MP{\geq}PC>NP$ but after thermocycling, the SBS was $ZLT{\geq}MPT{\geq}ZPT>PCT=NPT$ (p > 0.05). For the ARI score, both of the groups lacking primer (NP and NPT) displayed adhesive failure modes, but the groups with zirconia primers (ZP, ZPT, MP, MPT, ZL, and ZLT) were associated with mixed failure modes. Conclusions: Surface treatment with a zirconia primer increases the SBS relative to no-primer or silane primer application between orthodontic brackets and zirconia prostheses.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.499-504
• /
• 2005

폴리머콘크리트는 시멘트 콘크리트에 비해 강도와 내구성에 탁월한 성능을 가지고 있지 때문에 건설현장에서도 다양한 용도로 개발되어 널리 사용되고 있다. 그러나 폴리머콘크리트는 그 결합재로 쓰이는 수지의 가격이 높아 경제적인 면에서는 다소 불리하여 기존의 수지를 대체할 수 있는 결합재에 관한 연구가 진행되고 있다. PET를 재활용한 폴리머콘크리트는 산업폐기물을 재활용하여 경제적인 건설 신소재를 개발할 수 있어 그 영역이 점차 확대될 것으로 전망된다. 본 연구에서는 하수관거 및 폐수 시설 등에서 발생하고 있는 황산에 의한 피해를 줄이기 위한 방법의 일환으로 충전재 변화에 따른 PET 재활용 폴리머콘크리트의 황산에 의한 침식 실험을 실시하였다. 실험 결과 충전재로 중탄산칼슘을 사용한 경우는 외형 및 표면 상태에서 부식의 흔적이 있었으며, 중량 변화 및 강도 변화에서도 장기간 부식 환경에 노출 될 경우 문제점을 야기할 수 있음을 확인할 수 있었다. 반면에 충전재로 플라이애쉬를 사용한 경우는 중량변화 및 강도 변화가 적었으며 외형에서도 침지하지 않은 실험체와 거의 변화가 없었다. 이것은 플라이애쉬의 입자의 밀실 충전효과와, 강한 유리질결정체로 구성된 입자 때문인 것으로 판단된다. 따라서, 하수관거, 공장 폐수시설등 부식 환경 하에서의 구조물에서는 플라이애쉬를 충전재로 사용한 폴리머콘크리트의 사용이 적절한 것으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.110-113
• /
• 2008

This study was performed to predict the shape of polymer extrusion product and to find the cause of defective products Experiments was performed to extrude the complex profile shape using PC/ABS composite resin with new profile die and cooling die. A finite element analysis for the Polymer Extrusion process considering the heat transfer and thermal deformation was also performed, and the result was compared with the experimental data. It is found that the predicted profile shape in F. E. M was similar to the experimental result and the thickness of extruded product was thin when the velocity of profile die outlet was slow than the velocity of production (2m/min).

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.659-665
• /
• 2011

Recently, the plastic resin such as PC, ABS are widely used in IT market. Especially, in most cases the keypads mounted on the mobile phone are the dual-injection-plated type. Environmental regulation is based on the quality of injection-molded products and the minimum process steps are required to avoid the plating defects. Various parameters to produce the injection-molded plastic products make it difficult to obtain the desired stability. However, the past experience and the use of CAE analysis make it possible to predict the problems occurred in injection molding process. Especially, the problems of the weld lines such as runner balancing, bending, deformation and forming defects can be solved systematically and minimized by CAE analysis. Through this study, the non-uniform volumetric shrinkage and the difference in temperature distribution induce the deformation and the high value of stress causes the problems such as crack.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.36-41
• /
• 2021

The 3 dimensional Pipe (Annular) Shaped Products was selected as a test sample, then a attribute of a molding shrinkage according to the parameters of a injection process was examined with PC, which is the typical engineering plastic. Both the inside and the outside diameter of the Pipe (Annular) sample were shrank into the inner direction of the part. And then the comparative analysis of the samples proved that a increasing thickness led a bigger shrinkage rate in the equal outside diametric samples, and a decreasing outside diameter caused a bigger shrinkage rate in the same thickness samples. The comparative study of the cushion volume of a injection machine showed that the molding shrinkage was most affected by the pressure strength among the resin temperature, the maintenance pressure strength and the maintenance pressure duration time. Each of the shrinkage rates according to the measuring direction and the gate position was different. As a result, the injection molded sample had not a typical circular shape.

• 대한치과교정학회지
• /
• 제27권2호
• /
• pp.327-334
• /
• 1997

광중합형 글래스 아이오노머 시멘트(Fuji Ortho $LS^{(R)}$)와 화학중합형 레진 시멘트(Mono $Lok2^{(R)}$)을 선택하여 사람의 소구치를 대상으로 법랑질을 퍼미스 및 10% 폴리아크릴산, 38%인산으로 표면처리한 후 금속 및 프라스틱 브라켓을 부착하고 섭씨 $37^{\circ}C$의 생리 식염수에 24시간, 48시간 경과 시키고 만능강도시험기를 이용하여 전단결합강도를 측정하고 비교함으로써 교정용 접착제로서 광중합형 글래스 아이오노머 시멘트가 임상적 적용 가능성이 있는지 여부를 규명하고자 시행하여 다음과 같은 결론을 얻었다. 1. 퍼미스로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단결합강도는 화학중합형 레진군의 결합 강도보다 유의성 있게 낮았다(P<0.01). 2. 10% 폴리아크릴산으로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단 결합강도는 화학중합형 레진군보다 유의성이 낮았다(PC0.01). 3. 10% 폴리아크릴산으로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단결합강도는 피미스로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군보다 약간 높았으나 통계적으로 유의성이 없었다(P<0.05). 4. 메탈과 플라스틱군의 법랑질 표면처리에 관계없이 통계적으로 유의성이 없었다(P<0.05). 이상의 결과를 종합해볼 때 비록 광중합형 글래스 아이오노머 시멘트가 화학중합형 레진 시멘트보다 결합강도는 낮지만 이의 임상적 적용은 가능할 것으로 사료된다.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.379-400
• /
• 1992

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from the mandibular distal extension removable partial dentures with the mesial or distal placement of the occlusal rest and the mesial or distal connection in the back-action clasp with the five various designs of the back-action clasp, that is, the mesial connection and the distal rest, the distal connection and mesial rest, the mesial connection and mesial rest, the distal connection and the mesial and distal rest, and the mesial connection, and the mesial and distal rest. A photoelastic model was made of the epoxy resin(PC-1) and the hardner(PLH-1) with the acrylic resin teeth used and was coated with the plastic cement-1 at the lingual surface of the model and then five kinds of the removable partial dentures on the photoelastic model were set. A unilateral vertical load of 12.5 kg was applied on the central fossa of the first molar with the use of specially designed loading device and the pattern and distribution of the stress of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained. 1. In the back-action clasp with the mesial connection and mesial rest of the case 3, the effect of the stress distribution was the most favorable. 2. In the back-action clasp with the mesial and distal rest, of the case 4 and 5, the stress distribution was more greatly showed in the terminal abutment. 3. Generally, the stress distribution was more favarable in the mesial connection than in the distal connection. 4. In the back-action clasp with the mesial connection of the case 1, 3 and 5, the stress distribution was the most favorable in the mesial rest.