Browse > Article

A study on shrinkage deformation according to injection molding conditions of pipe (annular) shaped products  

Jeon, Dae-Seon (Department of Computer Aided Machinery, Iksan Campus of Korea Polytechnics)
Publication Information
Design & Manufacturing / v.15, no.2, 2021 , pp. 36-41 More about this Journal
Abstract
The 3 dimensional Pipe (Annular) Shaped Products was selected as a test sample, then a attribute of a molding shrinkage according to the parameters of a injection process was examined with PC, which is the typical engineering plastic. Both the inside and the outside diameter of the Pipe (Annular) sample were shrank into the inner direction of the part. And then the comparative analysis of the samples proved that a increasing thickness led a bigger shrinkage rate in the equal outside diametric samples, and a decreasing outside diameter caused a bigger shrinkage rate in the same thickness samples. The comparative study of the cushion volume of a injection machine showed that the molding shrinkage was most affected by the pressure strength among the resin temperature, the maintenance pressure strength and the maintenance pressure duration time. Each of the shrinkage rates according to the measuring direction and the gate position was different. As a result, the injection molded sample had not a typical circular shape.
Keywords
Annular Shape; Molding Shrinkage; Injection Mod; Injection Process;
Citations & Related Records
연도 인용수 순위
  • Reference
1 M. Y. Lyu, J. H. Mo, W. J. Chung, "Shrinkage in Injection Molded Part for Operational Conditions and Resins", Elastomer, vol,38, No.4, pp. 295-302, 2003.
2 S. R. Han, J. H. Kin, S. G. Jeon, Y. D. Jeong, 2007 "A Study on the Mechanical Properties and Shrinkage of Thermoplastic Elastomer", Journal of the Korean society for technology of plastics v.16 no.1=no.91, pp. 36-41, 2007.
3 H. I. Moon, C. W. Choi, K. S. Jeong, H. Y. Kim, "Thermal Viscoelastic Analysis of Plastic Part Considering Residual Stress", Journal of the Korean society for technology of plastics v.17 no.7=no.105, pp. 496-500, 2008.
4 M. Y. Lyu, J. H. Mo, "Investigation of the Part Shrinkage in Injection Molding for Class Fiber Reinforced Thermoplastics", Journal of the Korean society for technology of plastics, v.13 no.6, pp. 515-521, 2004.
5 C. D. Choi, "Design of Gate Locations, Molding Conditions, and Part Structure to Reduce the Warpage of Short-Fiber Reinforced Injection Molded Part", Journal of the Korean society for technology of plastics v.17 no.6 = no.104, pp. 443-448, 2008.