• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1009-1010
• /
• 2008

This paper presents a real-time aging measurement and feasible compensation system for the prolonged lifetime of OLED panel. The proposed system is composed of four parts, a PC with a man-machine interface, a measurement block, an adaptive amplifier block, and a compensation block. We apply a tree algorithm for less complexity and convenience of measurement on the degree of aging. An adaptive multi-stage differential amplifier is also implemented to deal with a various range of input voltages at the same spot.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.11-15
• /
• 2013

PURPOSES : This study is to compare sound transmission loss(STL) value depending on the four kinds of materials, PC(Polycarbonate), PMMA(Polymethyl mathacrylate), PE(Polyethlyene), PP(Polypropylene), and two types of structure, single layer and double with vacuum layer, of soundproof panel. METHODS : With four sorts of polymer material, the specimens were made as various structures, 4 mm and 8 mm of single soundpoof panel and vacuum layered 4 mm of one. The experimental condition and procedures were complied with authorized process test, KS F 2808. RESULTS : STL of single panel made of PC were the greatest followed by PMMA, PE, PP regardless of the thickness of panel, However, STL of PMMA panel began to decrease around 2500 Hz and reached the lowest value among others in 5000 Hz. Vacuum layer soundproof panel showed good performance in more than 2000 Hz. Only vacuum layer panel made of PC presented resonance frequency at 800 Hz while that of other vacuum ones at 1000 Hz. CONCLUSIONS : According to results of single layer, it was found that single panel functioned as the theorical way we expected in terms of surface density. That trends were blurred as the panel got thicker. And it was suggested also that vacuum layer panel performed well at high frequency, more than 2000 Hz.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.362-362
• /
• 2013

터치패널은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 누구나 쉽게 입력할 수 있는 장점으로 인해 기존에는 현금인출기, 키오스크 등 공공분야에 주로 많이 사용되어 왔으나, 최근의 터치스크린은 휴대폰, 게임기, 네비게이션, 노트북 모니터 등 개인정보기기의 입력장치로 활용분야가 넓어져가고 있다. 기존 터치패널은 유리 기판 위에 ITO박막(투명전도막)을 진공코팅하여 사용하여 왔지만, 최근 터치패널은 경량화를 고려하여 PET 필름 기판 위에 ITO 박막을 진공코팅하여 사용하고 있다. PET 필름의 유연성 때문에 ITO 코팅된 필름을 PC 혹은 강화유리 위에 OCA 물질을 이용하여 다시 고정하여야 한다. 이때 터치패널 제작시 생산공정이 늘어나 생산성이 떨어지고, 터치패녈의 광투과율도 떨어지는 2차적인 문제가 발생한다. 이를 해결코자하는 터치페널 업체의 Needs가 있고, 최근에 이를 해결하기 위하여 강화유리와 플라스틱 기판 위에 ITO 박막을 직접 진공코팅 하는 공정개발이 진행되고 있다. ITO 박막은 진공코팅 중에 열을 가하여 결정화를 이루어야 하는데, 강화유리와 플라스틱은 기판의 열에 약한 특성을 고려하여, 열을 가하지 않고 ITO 박막을 진공 코팅하여야 한다. 이러한 ITO 박막의 진공코팅 공정에는 In-line magnetron sputtering system이 사용된다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 강화유리와 플라스틱 기판 위에 정전용량방식 터치패널용 패턴 인비저블 ITO 투명전도막을 제작하고 그 특성을 조사하였다. ITO 박막의 면저항은 150 Ohm/cm2, 최고 광투과율은 90.56% (@583), 그리고 550 nm에서 광투과율은 90.46%로 ITO 박막 코팅 전후에 투과율 차이가 0.4임을 확인하였다. 정전용량방식의 터치패널에서는 ITO 박막 코팅 전후에 투과율 차이가 1이하의 특성, 즉 패턴 인비저블의 특성을 필요로 하는데, 이는 ITO 박막 패턴후에 패턴이 보이지 않게 하기 위해서이며, 이러한 시장의 Needs를 고려하면 본 연구에서 매우 중요한 연구 성과를 얻었다고 말할 수 있다. 그리고 강화유리와 플라스틱 기판 위에 여러 종류의 ITO 투명전도막을 제작하고, 또한 감성터치에 적용되는 ITO 투명전도막을 제작하여, 그 특성을 조사하여 이를 논하고자한다.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.440-446
• /
• 2009

Indium tin oxide(ITO) substrate is one of the key components of the touch panel and its sputtering process is dependent on the characteristics of various touch panel, such as driving type, size of panel, and the intended use. In this study, we optimized the sputtering condition of ITO film on polycarbonate(PC) by using in-line sputtering method for the application to resistive type touch panel. We varied the $O_2$/Ar gas ratio, sputtering power, pressure and moving speed of substrate to deposit ITO films at room temperature with the base vacuum of $1{\times}10^{-6}\;torr$. The sheet resistance and its uniformity, the transmittance, the thickness of the ITO film on PC substrate are investigated and analyzed. The optimized process parameters are as follows : the sheet resistance is $500{\pm}50\;{\Omega}$/□, the uniformity of sheet resistance is lower than 10%, the transmittance is higher than 87 % at 550nm, and the thickness is about 120~250. The optimized deposition conditions by in-line sputtering method can be applied to the actual mass production for the ITO film manufacturing technology.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.305-308
• /
• 2008

This paper presents the results of an experimental study carried out Prestressed Concrete Slab System of WAffle Shape(WAS), was perfomed in order to inverstigate it connection shear behavior according to primary paramaters: connection interval, filling matarial. Specimen is produced in Precast Concrete factories and it comprised one WAS panel and two half WAS panels and then it is filled with packing. Within the ranges of the parameters of the connection details used in this test, connections can develop greater shear strength than the nominal shear strength and the design service load for parking structures.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.549-556
• /
• 2009

This research analyzed the structural efficiency and application by improving the 100 mm width vertical joint to 150 mm and developing three connection methods to reduce the difficulty in assembling and handling PC walls. Moreover, nonlinear finite analysis was used for analyzing. From the analysis results, when double width connection was applied, the PC wall showed larger load capacity and ductility due to the steel bar sharing loads efficiently. Moreover, as the dimension of loops and the number of bars increased, the maximum load capacity increased as well. Also, among the double width connections, the largest capacity showed in the order of welding, ring and C type loop. However, in case of welding type loop connection, the ring type loop is more stable due to changes in different site conditions. Therefore, thorough quality control of welding is necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.241-246
• /
• 2004

We have designed LED display system using ARM7TDMI processor and implemented hangul input and output. This system is easily extensible because controller board and LED matrix board were designed one module. Possible Input Methods of LED display system are PC, PDA and remote controller's wired and wireless communication. We have ported QT/Embedded 2.3.7 with touch panel Input at embedded board of Linux OS 2.4.18 and PXA255 Processor based. QT Application which we coded is able to input displaying text using ethernet communication on embedded system. Many of indicating text data is able to be saved because only korean alphabet codes are stored for data which users want displaying.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1628-1630
• /
• 2002

In this paper, we measured 3-dimensional temporal behavior of the light emitted from discharge cell of plasma display panel(PDP) as a function of the pressure using the scanned point detecting system. The detected light signal through the PM tube is sent on the oscilloscope and oscilloscope which is connected to PC with GPIB. The whole system is controlled by a PC. From the temporal behavior results, we could analyze the discharge behavior of panel with Ne-Xe(4%) mixing gas and 300torr, 400torr, 500torr pressure. The top view of panel shows that the discharge moves from inner edge of cathode electrode to outer cathode electrode forming arc type. At the 300torr, initial emission time is very fast. The side view of panel shows that the light is detected up to $150{\mu}m$ height of barrier rib. In the panel of 300torr, emission distribution is wider than the others.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.487-492
• /
• 2009

This study was performed FE numerical analysis under 120-minute fire conditions, using the ABAQUS, a wide use software, on the basis of the test results by concrete tunnel lining fire strengths (ISO, RWS, and MHC). The concrete material test was to secure the material properties of concrete linings, which were numerical analysis input conditions. And then built the material properties, such as specific heat, heat transfer rate, heat expansion rate, density, elasticity coefficient and compression strength under high temperature conditions, as database at 20 $^{\circ}C$ to 800 $^{\circ}C$, applying them to analysis as input values. As a result, the tunnel linings under RWS fire conditions saw fire temperature rose to maximum 1119 $^{\circ}C$at the location of 5 mm above a thermal surface, and saw surface temperature amount to 1214 $^{\circ}C$ in the middle part.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1031-1038
• /
• 2005

In this paper, we propose real-time 3D image converting architecture by a unit of pixel for 2D/3D compatible PC and LCD of cellular phone with parallax burier, and implement a system for overall display operation after designing a circuit based on FPGA. After digitizing anolog image signal from PC, we recompose it to 3D image signal according to input image type. Since the architecture which rearranges 2D image to 3D depends on parallax burier, we use interleaving method which mixes pixels by a unit of R, G, and B cell. The propose architecture is designed into a circuit based on FPGA with high-speed memory access technique and use 4 SDRAMs for high performance data storing and processing. The implemented system consists of A/D converting system, FPGA system to formatting 2D signal to 3D, and LCD panel with parallax barrier, for 3D display.