• Membrane Journal
• /
• v.22 no.4
• /
• pp.265-271
• /
• 2012

Polybenzimidazole (PBI) was prepared by condensation polymerization using diaminobenzidine (DAB) and isophtalic acid (IPAc). The cation exchange membrane was prepared by introduce the ion exchange group in the PBI polymer. It was confirmed from FT-IR analysis that the prepared PBI powder had same peak compared with commercial PBI power. The ionic conductivity of PBI film was $0.1{\sim}0.9{\times}10^{-2}$ S/cm. The ionic conductivity of prepared SPBI cation exchange membrane showed $3.7{\sim}4.7{\times}10^{-2}$ S/cm and had higher than Nafion117 ($2.0{\times}10^{-2}$ S/cm).

• Composites Research
• /
• v.31 no.3
• /
• pp.83-87
• /
• 2018

An object in the Low Earth Orbit (LEO) is affected by many environmental conditions unlike earth's surface such as, Atomic oxygen (AO), Ultraviolet Radiation (UV), thermal cycling, High Vacuum and Micrometeoroids and Orbital Debris (MMOD) impacts. The effect of all these parameters have to be carefully considered when designing a space structure, as it could be very critical for a space mission. Polybenzimidazole (PBI) is a high performance thermoplastic polymer that could be a suitable material for space missions because of its excellent resistance to these environmental factors. A thin coating of PBI polymer on the carbon epoxy composite laminate (referred as CFRP) was found to improve the energy absorption capability of the laminate in event of a hypervelocity impact. However, the overall efficiency of the shield also depends on other factors like placement and orientation of the laminates, standoff distances and the number of shielding layers. This paper studies the effectiveness of using a PBI coating on the front bumper in a multi-shock shield design for enhanced hypervelocity impact resistance. A thin PBI coating of 43 micron was observed to improve the shielding efficiency of the CFRP laminate by 22.06% when exposed to LEO environment conditions in a simulation chamber. To study the effectiveness of PBI coating in a hypervelocity impact situation, experiments were conducted on the CFRP and the PBI coated CFRP laminates with projectile velocities between 2.2 to 3.2 km/s. It was observed that the mass loss of the CFRP laminates decreased 7% when coated by a thin layer of PBI. However, the study of mass loss and damage area on a witness plate showed CFRP case to have better shielding efficiency than PBI coated CFRP laminate case. Therefore, it is recommended that PBI coating on the front bumper is not so effective in improving the overall hypervelocity impact resistance of the space structure.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.17-22
• /
• 1999

In this paper we propose a new mixed method of LDA and tri-tone model to predict Korean prosodic break indices(PBI) for a given utterance. PBI can be used as an important cue of syntactic discontinuity in continuous speech recognition(CSR). The model consists of three steps. At the first step, PBI was predicted with the information of syllable and pause duration through the linear discriminant analysis (LDA) method. At the second step, syllable tone information was used to estimate PBI. In this step we used vector quantization (VQ) for coding the syllable tones and PBI is estimated by tri-tone model. In the last step, two PBI predictors were integrated by a weight factor. The proposed method was tested on 200 literal style spoken sentences. The experimental results showed 72% accuracy.

• Membrane Journal
• /
• v.20 no.3
• /
• pp.217-221
• /
• 2010

In order to overcome the drawback of proton exchange membrane fuel cells (PEMFCs), solid alkalime membrane fuel cells (SAMFCs) have been studied. In this report, we synthesized new sulfonated polybenzimidazole derivatives for SAMFCs. The polyimidazole derivatives were doped by KOH, and base-doped polybenzimidazoles showed high hydroxy ion conductivity and excellent mechanical properties. Especially, sPBI-co-PBI (75 : 25 for molar ratio of sulfonated and non-sulfonated moiety) showed good possibility for the anion exchange membrane. It has $2.98{\times}10^{-2}\;S/cm$ at $90^{\circ}C$ under 100% relative humidity.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.279-304
• /
• 2023

Polybenzimidazole (PBI) based membranes have evolved in literature as a popular membrane material for various applications in the past two decades because of their high temperature thermal durability, strong mechanical and tensile properties, high glass transition temperature (T_g), ion conduction ability at elevated temperature (up to 200℃), oxidative or chemical durability along with robust network like structural rigidity, which make PBI membranes suitable for various potential applications in chemically challenging environments. Ion conducting PBI based membranes have been extensively utilized in high temperature proton exchange membrane fuel cells (HT-PEMFC). In addition, PBI based membranes have been vastly utilized for the development of gas separation membranes and organic solvent nanofiltration (OSN) membranes for their unique characteristics. This review will cover the recent progress and application of various types of flat sheet PBI based membranes for HT-PEMFC, gas separation and OSN application.

• Archives of Pharmacal Research
• /
• v.20 no.5
• /
• pp.410-413
• /
• 1997

In the course of screening synthetic compounds to inhibit tumor cell growth, pyrrolo[1,2-.alpha.] benzimidazole (PBI), an intermediate of azamitosene, was found to inhibit a proliferation of gastric cancer cell lines. Despite a potential cytotoxic activity against solid tumor cells as opposed to that against rapidly-doubled leukemic cells, there has been no report on the inhibition of gastric cancer cell line by PBI and its' derivatives. The present experiment was designed to determine if PBI derivatives can effectively inhibit the cellular proliferation of gastric cancer cells by using in vitro as well as in vivo chemosensitivity system (MTT assay, clonogenic assay and human tumor xenografted assay). Of the tested PBI derivatives, PBI (18) and PBI (20), displayed the effective growth inhibition of cultured gastric cancer cells or even in the xenografted nude mouse model.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.442-455
• /
• 2022

High-temperature polymer electrolyte membrane fuel cell (HT-PEMFC) has been studied as an alternative to low-temperature PEMFC due to its fast activation of electrodes and high resistance to electrode poisoning by carbon monoxide. It is highly required to develop stable PEMs operating at high temperatures even doped by ion-conducting materials for the development of high-performance and durable HT-PEMFC systems. A number of studies have been conducted to develop polybenzimidazole (PBI)-based PEMs for applications in HT-PEMFC due to their high interaction with doped ion-conducting materials and outstanding thermomechanical stability under high-temperature operation. This review focused on the development of PBI-based PEMs showing high performance and durability. Firstly, the characteristic behavior of PBI-based PEMs doped with various ion-conducting materials including phosphoric acid was systematically investigated. And then, a comparison of the physicochemical properties of the PEMs according to the different membrane manufacturing processes was conducted. Secondly, the incorporation of porous polytetrafluoroethylene substrate and/or inorganic composites to PBI matrix to improve the membrane performances was studied. Finally, the construction of cross-linked structures into PBI-based PEM systems by polymer blending method was introduced to improve the PEM properties.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.207-213
• /
• 1998

On the basis of the previous study[1], miscibility were investigated and intermolecular interaction strength for the miscibility were relatively compared for the blends poly{2,2-(m-phenylene)-5,5'-bibenzimidazole}(PBI) with two aromatic polyimides (PIs) synthesized by another dianhydride. Aromatic PAAs were prepared by the reaction of condensation of two diamines, 4,4'-methylene dianiline(4,4'-MDA) and 4,4'-oxydianiline(4,4'-ODA) with 3,3',4,4'-diphenylsulfone tetracarboxylic dianhydride(DSDA) using DMAc, and then converted into PIs after curing. PBI/PAA blends were prepared by solution blending. Cast films or precipitated powders of the PBI/PAA blends were cared at a high temperature to transform into PBI/PIs blends. Miscibility and specific intermolecular interaction for miscibility in the blends were investigated, and compared with previous polyimide structures of PBI/PIs blends [1]. Two blends, PBI/DSDA+4,4'-MDA(Blend-V) and PBI/DSDA+4,4'-ODA(Blend-VI), were found miscible : the evidences were optically clear films, synergistic single composition dependent $T_g{\prime}s$, and frequency shifts of N-H stretching band as much as $39{\sim}40cm^{-1}$, and of C=O stretching band near 1730 and $1780cm^{-1}$, 5~6 and $3{\sim}4cm^{-1}$, respectively. The specific intermolecular interactions existing between PBI and PIs were relatively analyzed with the area(A) formed between the $T_g{\prime}s$ of the measured and that of the calculated by the Fox equation at all compositions, the ${\kappa}$ values in Gordon-Taylor equation obtained from the measured $T_g{\prime}s$, and differences of the frequency shifts in the functional N-H and carbonyl stretching band. From the results, the area(A) and the ${\kappa}$ values for Blend-V and VI were smaller than those for Blend-III and IV used in previous study[1]. Differences of the frequency shifts in the functional groups(N-H and C=O) also showed similar tendency. Thus, specific intermolecular interaction strength in terms of hydrogen bonding of PBI/PI blends is dependent upon chemical structures of PIs, that is, PIs it seems that $SO_2$ group in dianhydride(DSDA) has weaker hydrogen bond strength than those of C=O in BTDA. In other words, it implies that the former occupied bulk space than the latter due to the sterric effect.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.643-651
• /
• 2019

Polybenzimidazole (PBI), an engineering polymer with well-known excellent thermal, chemical and mechanical stabilities has been recognized as an alternative to high temperature polymer electrolyte membranes (HT-PEMs). This review focuses on recent advances made on the development of PBI-based HT-PEMs for fuel cell applications. PBI-based membranes discussed were prepared by various strategies such as structural modification, cross-linking, blending and organic-inorganic composites. In addition, intriguing properties of the PBI-based membranes as well as their fuel cell performances were highligted.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.185-192
• /
• 1998

Four kinds of polyamicacids(PAAs) were prepared by the condensation reaction of four diamines with different linkages, 3,3'-diaminodiphenyl sulfone(3,3'-$DDSO_2$), 4,4'-diaminodiphenyl sulfone(4,4'-$DDSO_2$), 4,4'-methylene dianiline(4,4'-MDA) and 4,4'-oxydianiline(4,4'-ODA), and dianhydride, 3,3', 4,4'-benzophenone tetracarboxylic dianhydride (BTDA) using the solvent, dimethylacetamide(DMAc). These four PAAs were blended with poly[2,2-(m-phenylene)-5,5'-bibenzimidazole](PBI) from the solution blending. Then called as Blend-I, II, III, and IV, respectively. Cast films or precipitated powders of the PBI/PAA blends were cured at a higher temperature than expected Tg to transform into PBI/PIs blends. Miscibility, specific intermolecular interaction for miscibility and their relative strength as a function of polyimide chemical structure with different four diamines in the PBI/PI systems were investigated. Four blends used in this study were all miscible, and the specific intermolecular interactions existing in these blends was thought to be the hydrogen bonding between the N-H of PBI and the C=O of PIs. The hydrogen bonding in the blends were shown to be stronger in the Blend-III and Blend-IV than Blend-I and II. It is speculated that the differences of hydrogen bonding strength of PBI/PI blends are dependent upon chemical structures of PIs, that is, PIs consisting of $SO_2$ group have a weaker hydrogen bonding strength than those of O or $CH_2$ group because the former has a larger spacer than the latter.