• Journal of Bio-Environment Control
• /
• v.15 no.1
• /
• pp.21-34
• /
• 2006

This research was conducted to determine the plant growth and nutrient contents of potted chrysanthemum 'Lima Honey' as influenced by application rate of fused superphosphate (FSSP) in three root media, peatmoss+vermiculite (1:1, v/v; PV), peatmoss+composted rice hall (1:1, v/v; PR), and peatmoss+composted pine bark (1:1, v/v; PB). All root media contained polyacrylic acid sodium salt at a rate of $4.5g L^{-1}$. The treatment of $1.4g L^{-1}$ in PV and those of $0.7g L^{-1}$ in PR and PB had the greatest fresh and dry weights in each root medium at both 43 and 80 days after transplanting. Elevated application rates of FSPP increased tissue contents of N, P, and K at both 43 and 80 days after transplanting in PV medium. However, the differences in tissue contents of N, P and K in PR medium were less significant among treatments of FSPP. The pre-planting FSPP also less affected the tissue contents of nutrients at 80 days after transplanting as compared to those at 43 days after transplanting. Elevated application rates of FSPP in PV medium increased EC and the concentrations of $NO_3,\;P_2O_5$, K, Ca, and Mg in soil solution of root media at 43 days after transplanting. The EC in PV medium at 80 days after transplanting was higher than that at 43 days after transplanting. The EC in all root media at 80 days after transplanting was not different among treatments of FSPP.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.35-41
• /
• 2004

This study investigated the crystal growth, crystalline structure and the basic optical properties of $PbSnSe/BaF_2$ epilayers. The PbSnSe epilayer was grown on $BaF_2$(111) insulating substrates using a hot wall epitaxy (HWE) technique. It was found from the analysis of X-ray diffraction patterns that $PbSnSe/BaF_2$ epilayer was grown single crystal with a rock-salt structure oriented along [111] the growth direction. Using Rutherford back scattering, the atomic ratios of the PbSnSe was found to be proper stoichiometric. The best values for the full width at half maximum (FWHM) of the DCXRD was 162 arcsec for PbSnSe epilayer. The epilayer-thickness dependence of the FWHM of the DCXRD shows that the quality of the $PbSnSe/BaF_2$ is as expected. The dielectric function ${\varepsilon}(E)$ of a semiconductor is closely related to its electronic energy band structure and such relation can be drawn from features around the critical points(CPs) in the optical spectra. The real and imaginary parts(${\varepsilon}1$ and ${\varepsilon}2$) of the dielectric function ${\varepsilon}$ of PbSe were measured, and the observed spectra reveal distinct structures at energies of the E1, E2 and E3 CPs. These data are analyzed using a theoretical model known as the model dielectric function (MDF). The optical constants related to dielectric function such as the complex refractive index ($n^*=n+ik$), absorption coefficient (${\alpha}$) and normal-incidence reflectivity (R) are also presented for $PbSnSe/BaF_2$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.129-135
• /
• 2012

This study was to investigate the heavy metal content of 55 commercial salts in the Seoul area. There were 22 types of solar sea salt, 17 types of processed salt and 16 types of reworked salt. Looked at another way, there were 22 types of domestic salt and 33 types of salt imported from France, the U.S., Japan, Australia, New Zealand, and Argentina. The samples were measured using both a mercury analyzer and an Inductively-Coupled Plasma Optical Emission Spectrometer (ICP-OES). The average heavy metal contents for commercial salts were Pb $0.281{\pm}0.344$, Cd $0.035{\pm}0.221$, Cr $0.364{\pm}0.635$, Cu $0.182{\pm}0.313$, As $0.046{\pm}0.062$, Ni $0.155{\pm}0.247$, Al $5.753{\pm}10.746$, Co $0.028{\pm}0.211$ and Hg $0.001{\pm}0.001$ mg/kg. The leads were detected highly in solar sea salt rather than in processed salt or reworked salt. Also chrome, arsenic and nickel were found more in processed salt. There were large differences in aluminum content between imported solar sea salt and processed salt. Aluminum was highly detected in French products, showing that salt can be affected by regional differences. The weekly average intakes of Pb, Cd, Cr, Cu, and Hg from commercial salt were 1.652% (0.000~6.754), 0.372% (0.000~7.214), 3.177% (0.000~26.279), 0.008% (0.001~0.049), and 0.031% (0.000~0.094) respectively compared with Provisional Tolerable Weekly Intakes established by the Joint FAO/WHO Expert Committee for the evaluation of food safety. The content of heavy metals from commercial salts was determined to be at safe levels.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2013

To investigate the usability of the bitterns produced during salt manufacture, the characteristics of soybean curds coagulated with bitterns like solar salt bitterns (SSB), dehydrated salt bitterns (DSB), concentrated sea water (CSW) and bitterns produced during the storage of solar salt (BSS) were measured. The Mg contents of all the bitterns were the same, but the Na content of the BSS was 1.0-2.0 times as high as that of the other bitterns. The yield of the soybean curds did not differ with the addition of coagulants, except for the CSW. However, the soybean curds were acquired in large quantities by the DSB and CSW. The mg and Na contents of the soybean curds that were made with the bitterns were higher than those of $MgCl_2$. The heavy metals were below 3 ppm in the curds, especially those produced by the CSW, but Pb was not detected. Among the mechanical characteristics of the soybean curds, their adhesiveness was not affected by the coagulants, but the mechanical hardness of the curds produced by the DSB and CSW was lower. The sensory evaluation showed that the curds that were produced by the bitterns were more highly preferred than those produced by $MgCl_2$. In particular, the soybean curd that was made with the CSW was favored due to its soft texture. The results of this study, particularly the high yield of the curds that showed a soft texture, showed that the bitterns, especially the CSW, could be used safely and economically.

• Journal of Korean Society for Atmospheric Environment
• /
• v.5 no.2
• /
• pp.72-83
• /
• 1989

Twenty-five atmospheric particulates were collected using a high volume aerosol sampler from Septermber to December, 1988 on a site located on the West coast of Korea and analysed for twelve elements (Na, Mg, Al, Mn, Fe, Cu, Co, Ni, Zn, Ag, Cd, and Pb) by AAS. The particles being mainly crustal minerals, large quantity of spherical fly ashes were also observed. In order to identify the origin of trace metals in atmospheric particulates, enrichment factor, interelemental correlation and factor analysis were performed. Based upon these analysis, the twelve elements can be classified into three groups; the elements dominantly present in soil particles (Al, Mn, Fe, Co, and Ni), those in sea salt aerosols (Na and Mg), and those in air pollution-derived particles (Cu, Cd, Pb, Ag and Zn).

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.244-248
• /
• 1990

The effect of Nd3+ on the electrical and optical properties in PZT ceramics were investigated. The powders were prepared by the coprecipitation method using the salt solutions and Nd3+ was partially substituted for Pb2+ of Pb(Zr0.54 Ti0.46)O3. The coprecipitate were obtained under pH 11.8-12 and the single phase of PLZT powders were synthesized at about 500$^{\circ}C$. In the case of specimens with 4at.% of Nd which were sintered at 1250$^{\circ}C$ for 55 hours under 1atm, showed 50% of transmittance for 600nm(wave length).

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1326-1329
• /
• 1997

In this paper, PNN-PZN-PZT ceramics were fabricated with various mole ratio of the PZT[$Pb(Zr_{1/2}Tid_{1/2})O_3$]. PNN [$Pb(Ni_{1/3}Nb_{2/3})O_3$] and PZN[$Pb(Ni_{1/3}Nb_{2/3})O_3$ powders prepared by double calcination and PZT powders prepared by molten-salt synthesis method. The formation rate of perovskite phase in PNN-PZN-PZT ceramics could be obtained about 92% at PZT 0.3 mole ratio. The relative permittivity of specimen with PZT 0.3 mole ratio was shown 5,320 and appeared the relaxor ferroelectric feature. The maximum piezoelectric coefficient $d_{31}$ to be used for evaluation the displacement of piezoceramics in PNN-PZN-PZT ceramics was $324{\times}10^{-12}$(C/V) at the vicinity of morphotropic phase boundary and was larger than that of solid PZT ceramics($120{\times}10^{-12}C/V$).

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.6
• /
• pp.727-738
• /
• 1999

Total 76 aerosol samples were collected at Sungsan in Cheju Inland by high volume air sample for 1 year, from May 1995 to April 1996, and were analyzed for major elements(Na, Mg, Ca, Al, Fe) and trace elements(Mn, Co, Ni, Zn, Cd, Pb, U) by ICP/AES and ICP/MS. This study aims to determine the concentrations of trace metals and their seasonal variations in the atmosphere of Cheju Island, where is the remote area from pollution sources and also is the midway of transport of Asian continental materials into the western North Pacific. The concentrations of Na and Mg contributed by sea-salt aerosols were similar to those in the western part of Cheju island(Kosan) and in the western coast of Korea(Mallipo). They showed the highest value in summer and the lowest in spring and winter. Crustal metals(Al, Fe, Ca, Mn, Co, U) were 2~3 times lower than those of Mallipo. These metals showed the lowest values in summer and the highest in spring. Pollution-derived metals (Zn, Cd and Pb) were 2~4 times lower than those in Malipo. Some elemental ratios in aerosols grouped by three wind directions(north-northwest, east, and south-southwest) such as Fe/Al and Pb/Zn are presented as useful tracers indicating source areas, and their differentiation may be explained by geology and fuel types of source areas.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1330-1332
• /
• 1997

In this paper, PNN-PZN-PZT ceramics were fabricated with various mole ratio of the PZT[$Pb(Zr_{1/2}Tid_{1/2})O_3$]. PNN [$Pb(Ni_{1/3}Nb_{2/3})O_3$] and PZN[$Pb(Ni_{1/3}Nb_{2/3})O_3$ powders prepared by double calcination and PZT powders prepared by molten-salt synthesis method. The formation rate of perovskite phase in PNN-PZN-PZT ceramics could be obtained about 92% at PZT 0.3 mole ratio. The relative permittivity of specimen with PZT 0.3 mole ratio was shown 5,320 and appeared the relaxor ferroelectric feature. The maximum piezoelectric coefficient $d_{31}$ to be used for evaluation the displacement of piezoceramics in PNN-PZN-PZT ceramics was $324{\times}10^{-12}$(C/V) at the vicinity of morphotropic phase boundary and was larger than that of solid PZT ceramics($120{\times}10^{-12}C/V$).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.206-210
• /
• 1997

In the fields of the optics, precise machine, semiconductors, the micro-positioning actuators are required for the control of position in the submicron range. PNN-P2N-PZT ceramics were fabricated with various mole ratio of the PZT[Pb(Zr$_{1}$2//Ti$_{1}$2)O$_3$]. PNN (Pb(Ni$_{1}$3/Nb$_{2}$3/)O$_3$]and PZN[Pb(Zn$_{1}$3//Nb/sbu 2/3/)O$_3$] powders prepared by double calcination and PZT powders prepared by molten- salt synthesis method. The relative permittivity of specimen with PZT 0.3 mole ratio was shown 5,320 and appeared the relaxor ferroelectric feature. The maximum Piezoelectric coefficient d$_{31}$ to be used for evaluation the displacement of piezoceramics in PNN-PZN-PZT ceramics was 324$\times$10$^{-12}$ (C/V) at the vicinity of morphotropic phase boundary and was larger than that of solid PZT ceramics(120$\times$10$^{-12}$ C/V).