• Journal of the Korean Wood Science and Technology
• /
• v.16 no.3
• /
• pp.65-71
• /
• 1988

캐나다가 미국산 활엽수재의 가장 큰 수입국이며 수입된 일부 제재목과 수입원목으로 제조된 단판중 일부는 유럽으로 재 수출되고 있다. 수입 물량적인면에서 캐나다는 다른 국가와의 격차는 좁혀지더라도 미국산 활엽수재의 제1위 수입국의 위치를 당분간 유지할 것이다. 유럽에서의 제재목 수요가 1973년부터 1983년간의 10년간에는 급진적으로 증가 되었지만 1984년에 는 갑자기 감소되었다. 이와같은 현상은 과거 유럽 전통가구에 소재(素材)를 많이 사용했지만 현재는 소재(素材)를 적게 사용하고 단판이나 인쇄한 종이를 붙인 파아티클 보오드(PB)를 더욱 많이 사용하고 있기 때문이다. 현재 유럽지역에서는 가구의 크기를 줄이거나 가구에 사용되는 원자재의 비용을 줄임으로 제품의 가격을 싸게하여 소비자에게 보다 경쟁력있는 가격으로 제품을 공급할려고 하고 있으며 활엽수재의 가격이 너무 비싸 가구제조업체들은 소재(素材)를 다른 것으로 대체하고 보다 값싼 수종을 모든 지역에서 찾고 있는 중이다. 태평양 연안국가에서의 미국산 활엽수재의 수입 물량은 계속 증가되어 미국산 활엽수 총 수출 물량의 약 23% 정도 된다. 자유중국과 일본에서 미국산 활엽수재를 가장 많이 수입하고 있다. 자유중국은 주로 수출용 가구부품및 가구에 사용되는 red oak와 white oak 가 주 수종이고 가구는 미국으로 재 수출하고 있다. 일본은 주로 black cherry, yellow poplar와 cotton wood를 수입하는데 수입량의 약 67%는 대패질한 건조 가공품이다. 자유중국에서와는 달리 일본에서의 미국산 활엽수의 용도는 일본산 활엽수의 대체수종으로 허용되고 있다. 앞으로 일본에서의 미국산 활엽수재의 수요는 일본 국내시장의 요인에 의해 좌우될 것인데 한정된 물량의 일본산 활엽수재와 온대 활엽수재의 요구에 영향을 받을 것이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.92-92
• /
• 2008

PDP의 저가화, 친환경화, 고화질화는 타 디스플레이와 경쟁을 위해 필수적이고 그로 인한 소재의 개발이 필요하다. 저가화는 부품, 공정에서도 가능하지만 소재에서의 원가가 상당부분을 차지하고 있기 때문에 소재 개발이 중요하며, 친환경화는 현재 유전체에서 많이 사용되고 있는 유해소재를 친환경 소재로 대체함으로써 개발이 이루어지고 있다. 그래서 우리는 현재 PDP에서 전극물질로 사용되어지는 고가의 Ag를 Gu입자에 Ag 박막으로 코팅한 Ag/Cu 전극 powder를 사용하여 저가의 전극 paste를 만들고 스크린 프린터와 노광장비를 사용하여 전극을 형성하였다. 그 후 친환경적인 Pb free 투명유전체를 입히고 전극과의 상호 매칭성을 연구 하였다. 결과적으로 기존 PDP 공정에서 볼 수 없었던 황변현상, 전극착색현상, 전극입자의 터짐성 등 많은 현상이 일어났지만, 기존 공정 온도보다 낮은 온도로 공정한 결과, 이러한 문제들이 줄어드는 것을 확인하였다. 이로써 공정단가의 저가화와 제품의 친환경을 가면서도 기존과 차이가 제품을 실현할 수 있을 것이다.

• Journal of Industrial Convergence
• /
• v.2 no.1
• /
• pp.159-186
• /
• 2004

One of the biggest change in the distributive market recently is that the development of private brand is progress actively since consumers purchasing behavior is tend to shift to resonable and practical planned purchase from brand image or brand name. Once the development of private brands is done successfully, the independent merchandising distinguished from other distribution companies is established, store image through customer satisfaction is strengthen and volume of sales and profit are increased. However, the existing studies in this field have not dealt with this matter systematically. Therefore, the purpose of this study is to propose an integrated framework within which to view private brand proneness. Factors found to influence private brand proneness included perceived cost, with private brand, perceived value for money, store fame, perceived risk, perceived quality variation between national and private brand products. Foe empirical analysis, the data were collected from 211 consumers who purchased the private brands in discount store and department store. With the collected survey data, reliability test, factor analysis for validity test and regression analysis for hypotheses test were conducted. Most hypotheses were accepted but on hypotheses were rejected negative relation of perceived cost and private brand proneness. Research results indicate that private brand proneness is affected by perceived value, perceived fame and there are negative relation between private brand proneness and perceived quality variation.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.357-386
• /
• 2007

At present, thirteen Buddhist bells of Unified Silla are known to the world: Six in Korea, five in Japan and two other bells, and three out of them are impossible to make out its original form. Therefore, we divided the form of Unified Silla Buddhist bells based on the ten other bells, and we tried out to prove the manufacturing technology by the comparison of the research material of Uncheon-dong bell and existing research materials of other bells, in other to find their linkage based on the alloy elemental composition. We divided Unified Silla Buddhist bell into two types: Type I has symmetric apsaras and regular patterns on its face and it was made in early Silla period; type II has asymmetric apsaras and irregular pattern arrangement and made in late Silla period. In particular, Uncheon-dong Buddhist bells is very similar to Komyoji[光明寺] temple bell from ninth century in Japan. It is peculiar that the apsaras on Uncheon-dong bell play vertical music instruments that are never seen in Unified Silla Buddhist bell. Most of Unified Silla Buddhist bell are compounded with Cu-Sn or Cu-Sn-Pb system. From eighth and ninth century, bells were cast with even composition of copper, tin and lead, and the bronze alloy ratio was similar to the record in Gogonggi[考工記], Jurye[周禮], a book from ancient China. Particularly, Uncheon-dong bell is in a rare case of Cu-Sn-Pb-As system. As had been rarely used in Unified Silla Buddhist bells, so we presented the relative research materials. As has the same nature as Pb. Because As easily volatilize at high temperature, it is hard to use. But it has its merit of solidity and durability. Pb enhances fluidity and thereby expresses the patterns more distinct; As makes the bell stronger. The result of lead isotope ratio could not exactly reveal a concrete producing center. However, over the analysis of our samples, hereby we suggest Uncheon-dong bell was made of materials from just one ore deposit.

• Journal of Environmental Health Sciences
• /
• v.43 no.2
• /
• pp.103-110
• /
• 2017

Objectives: This study was performed to provide basic data for the re-establishment of standards (criteria) and analytical methods for hazardous metals in nail enamel. Methods: Ten metals (lead; Pb, arsenic; As, cadminum; Cd, antimony: Sb, cobalt; Co, nikel; Ni, copper; Cu, chromium; Cr, aluminum; Al, and mercury; Hg) were measured in 67 commercial nail enamels containing glitter and/or pearls. The content of hazardous metals (excepting Hg) was determined by using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES) after microwave digestion. Mercury content was measured by a mercury analyzer without any preparation. Results: The detected ranges of the intact samples were as follows: $ND-1.756{\mu}g/g$ for Pb, $ND-1.24{\mu}g/g$ for As, ND for Cd, $ND-20.41{\mu}g/g$ for Sb, $ND-12.36{\mu}g/g$ for Co, $ND-7.908{\mu}g/g$ for Ni, $0.088-79.27{\mu}g/g$ for Cu, $0.281-18.54{\mu}g/g$ for Cr, $13.78-3563{\mu}g/g$ for Al, and $ND-0.044{\mu}g/g$ for Hg. After centrifugation, the detected ranges of supernatant were as follows: $ND-0.435{\mu}g/g$ for Pb, $ND-0.504{\mu}g/g$ for As, ND for Cd, $ND-0.035{\mu}g/g$ for Sb, $ND-13.17{\mu}g/g$ for Co, $ND-0.232{\mu}g/g$ for Ni, $0.117-90.07{\mu}g/g$ for Cu, $0.174-2.787{\mu}g/g$ for Cr, and $9.459-1565{\mu}g/g$ for Al. The results of this analysis showed that the levels of heavy metals such as Pb, As, and Sb were much higher in the intact samples than those of supernatant. Conclusion: In the present study, we found that the levels of hazardous metals were significantly different depending on the status of the presence of glitter. Based on the results, we recommend that the product consumer refrain from prolonged application of nail enamel, avoid biting or chewing the nails, and wear gloves during cooking and washing dishes.

• Analytical Science and Technology
• /
• v.11 no.2
• /
• pp.105-111
• /
• 1998

The biodegradabilities of surfactants were measured for shampoos and powder detergents for clothing(six kinds of each) in domestic market at present. Also the phosphates that cause of eutrophication and heavy metals to have a direct effect on human body were measured. Analysis results show that though they all come up to KS(Korean Industrial Standards), samples containing plenty of sodium ${\alpha}$-olefin sulfonate(AOS), linear alkyl benzene sulfonate(LAS) and synthetic sodium lauryl etoxylate sulfonate (SLES) have the lower biodegradability than the others. It was found that these samples were petroleum surfactants, and the lower biodegradability than surfactants extracted naturally. The contents of phosphates and heavy metals in the samples were under the regulation limits for the cosmetic standards.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.281-283
• /
• 1996

전자제품의 경박 단소화에 필수 부품인 칩저항기, HIC 등의 제조 기술은 급속한 성장을 이룬 반면에 가장 중요한 특성을 발현하는 전극 재료 및 저항 재료의 제조는 기술적으로 취약한 부분이다. RuO2와 Pb2Ru2O5.5는 저항 페이스트의 가장 중요한 원재료로서 저항 편차, 온도저항계수(TCR), 전압저항계수(VCR), NOISE 등의 전기적 특성과 페이스트이 흐름성, 보존 안정성 등의 작업성에 큰 영향을 미친다. 외국에서 산화 루테늄 분말 제조에 대한 많은 연구가 진행되어 오고 있으나 대부분 출발 물질을 염화 루테늄을 사용하여 RuO2 분말을 제조하고 있다. 이렇게 제조된 RuO2 분말은 전자 재료에 악영향을 미치는 염소이온이 잔류할 가능성이 높다. 본 연구에서는 Ru metal에서 루테늄산염을 만들어 위의 문제를 최소화 하였고, 전기적 특성이 우수한 고분산 초미립의 RuO2를 얻기 위해 산화, 환원, 정제, 배소 등의 제조 공정에 있어서 최적 조건을 고찰 하였다.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.115-122
• /
• 2017

This study analyzed that the standard of school supplies affects the satisfaction of certification. Safety requirements of school supplies in the Republic of Korea is enforced by court duty certification. Therefore, a test was conducted to compare the safety requirements of the United States and Europe and the survey was conducted to know how much manufacturers and importers are satisfied with the certification. To prepare management measures for harmful substances contained in children's product, XRF(X-ray Fluorescence Spectrometry) is utilized to analyze lead(Pb) and cadmium(Cd) in PA(paint), SP(sheet) and PVC(Poly Vinyl Chloride). The results of comparative analysis of ICP(inductively coupled plasma) is analyzed statistically with measured values.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.294-303
• /
• 1999

Resistance spot welding is commonly used for welding products of high quality because of clean welding and short w welding-time. But. conventional spot welders bring about the depreciation of welding products, iuespective of dynamic r resistance characteristics during welding time. This paper discussed dynamic resistance database implementation in t terms of welding performance improvement. On different welding conditions, we compared dynamic resistance, r respectively, about pure iron and Sn-Pb alloy on Copper. Also, it investigated the relation of tensile shear strength and d dynamic resistance in welded workpiece.

• Journal of Environmental Policy
• /
• v.13 no.3
• /
• pp.109-133
• /
• 2014

With a growing concern about climate change and green house gases mitigation, carbon labeling policy has been launched in several countries as an environmental policy which connects low carbon production to low carbon consumption. This research aims to propose a model that explains consumers' attitude and brand loyalty toward carbon labeling products. This model specifies the consumer's psychological processes by which consumer values, such as autonomy and environmental values, affect carbon labeling product and corporate images and finally form brand loyalty toward carbon labeling products. Panel data were collected in two separate surveys and analyzed using a structural equation technique. Results are summarized as follows. First, consumers' autonomy value(AV) positively affects locus of control(LC) and corporate image(CI). Second, consumers' environmental value(EV) positively influences perceived consumer effectiveness(PCE), which in turn has a negative effect on perceived barriers(PB). Perceived barriers finally affect product image(PI) negatively. Third, both corporate image and product image have causal relationships with brand loyalty. Our results suggest that carbon labeling policy contributes not only to the reduction of greenhouse gases but also to the increase of consumers' attitude and brand loyalty toward carbon labeling products. This research also provides governments with directions for efficient environmental policy and firms with guidance on effective marketing strategies about carbon labeling.