• Title/Summary/Keyword: PASS theory

Search Result 165, Processing Time 0.033 seconds

Design of a Simulated Floating Inductor Using Fully-Differential OTA's and Its Application (완전-차동형 CMOS OTA들을 이용한 시뮬레이티드 플로팅 인덕터의 설계 및 응용)

  • Shin, Hee-Jong;Chung, Won-Sup
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.38 no.1
    • /
    • pp.35-44
    • /
    • 2001
  • A simulated floating inductor using two fully-differential OTA's and a capacitor is presented. The theory of operation is described and experimental results are used to verify theoretical predictions. The results show close agreement between predicted behavior and experimental performance. The proposed floating inductor has about two times higher Q factor than conventional designs. The application of the inductor to a ladder type third order ellitic low pass filer is also presented.

  • PDF

Semi-lumped Balun Transformer using Coupled LC Resonators

  • Park, Jongcheol;Yoon, Minkyu;Park, Jae Yeong
    • Journal of Electrical Engineering and Technology
    • /
    • v.10 no.3
    • /
    • pp.1154-1161
    • /
    • 2015
  • This paper presents a semi-lumped balun transformer using conventional PCB process and its design theory and geometry for the maximally flat response and wide bandwidth using magnetically coupled LC resonators. The proposed balun is comprised of two pairs of coupled resonators which share one among three LC resonators. It provides an identical magnitude and phase difference of 180° between two balanced ports with DC isolation and an impedance transformation characteristic. Theoretical design and analysis were performed to optimize the inductance and capacitance values of proposed balun device for obtaining the wide bandwidth and maximally flat response in its pass-band. Three balun transformers with a center frequency of 500 MHz were demonstrated for proving the concept of design proposed. They were fabricated by using lumped chip capacitors and planar inductors embedded into a conventional 4-layered PCB substrate. They exhibited a maximum magnitude difference of 0.8 dB and phase difference within 2.4 degrees.

WEAK SOLUTIONS AND ENERGY ESTIMATES FOR A DEGENERATE NONLOCAL PROBLEM INVOLVING SUB-LINEAR NONLINEARITIES

  • Chu, Jifeng;Heidarkhani, Shapour;Kou, Kit Ian;Salari, Amjad
    • Journal of the Korean Mathematical Society
    • /
    • v.54 no.5
    • /
    • pp.1573-1594
    • /
    • 2017
  • This paper deals with the existence and energy estimates of solutions for a class of degenerate nonlocal problems involving sub-linear nonlinearities, while the nonlinear part of the problem admits some hypotheses on the behavior at origin or perturbation property. In particular, for a precise localization of the parameter, the existence of a non-zero solution is established requiring the sublinearity of nonlinear part at origin and infinity. We also consider the existence of solutions for our problem under algebraic conditions with the classical Ambrosetti-Rabinowitz. In what follows, by combining two algebraic conditions on the nonlinear term which guarantees the existence of two solutions as well as applying the mountain pass theorem given by Pucci and Serrin, we establish the existence of the third solution for our problem. Moreover, concrete examples of applications are provided.

Control Method for Reducing the THD of Grid Current of Three-Phase Grid-Connected Inverters Under Distorted Grid Voltages

  • Tran, Thanh-Vu;Chun, Tae-Won;Lee, Hong-Hee;Kim, Heung-Geun;Nho, Eui-Cheol
    • Journal of Power Electronics
    • /
    • v.13 no.4
    • /
    • pp.712-718
    • /
    • 2013
  • This paper proposes a control method for reducing the total harmonic distortion (THD) of the grid current of three-phase grid-connected inverter systems when the grid voltage is distorted. The THD of the grid current caused by grid voltage harmonics is derived by considering the phase delay and magnitude attenuation due to the hardware low-pass filter (LPF). The Cauchy-Schwarz inequality theory is used in order to search more easily for the minimum point of the THD. Both the gain and angle of the compensation voltage at the minimum point of the THD of the grid current are derived with the variation of cut-off frequencies of the hardware LPF. Simulation and experimental results show the validity of the proposed control methods.

The Experience of Open Reduction and Internal Fixation of Mandible Fracture by Acupuncture Method (Acupuncture를 이용한 하악골 골절수술경험 -증례 보고-)

  • Khil, Hong-Mo;Kwak, Ho-Sung;Ro, Shik
    • The Korean Journal of Pain
    • /
    • v.9 no.1
    • /
    • pp.195-199
    • /
    • 1996
  • Based on points of neuroendocrine physiology, stimulus developed at the acupuncture site can pass to the pituitary gland through somatosensory and activated descending inhibitory mechanism which originated in raphe magnus of midbrain. For the operation of mandible fracture, acupuncture anesthesia was performed at 6 points of both forearm and both feet by method taking point on distant segment. Acupuncture anesthesia deals with central analgesic mechanism and the theory of diffuse noxious inhibitory control.

  • PDF

Digital Signal Processing for Improvement of Resolution in A-mode (A-mode의 분해능향상을 위한 디지탈 신호처리)

  • 최종호;최종수
    • Journal of Biomedical Engineering Research
    • /
    • v.6 no.1
    • /
    • pp.31-36
    • /
    • 1985
  • In this paper, we describe the digital signal-processing for ultrasonic echo signals for the improvement of range resolution. The problem is to find the magnitude of analytic signals that are consistent with the arrival-rate of energy. It is also baaed upon the fact that the shapes of echo signals do not change, although the ampli- tudes and widths of the echo signals become smaller and wider than those of the transmitted signals. We have made the improvement in range resolution by using the quadrature-low pass filter and the area filter which are made on the basis of the theory discussed above.

  • PDF

A design of single side-band filter for millimeter wave using martin-puplett interferometer (Martin-puplett 간섭계를 이용한 밀리미터파 대역의 단측파대 여파기 설계)

  • 한석태;김효령;이창훈;박종애;정현수;김광동;김태성;박동철
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.4
    • /
    • pp.98-105
    • /
    • 1996
  • The design method of 85 GHz-115 GHz band single side-band filter using the principle of martin-puplett inteferometer is described. It has been designed by this method and also manufactured and tested. From the test results, not only the ratio of image singal rejection of 19 dB is obtained, but also the theoretical and experimental results of center frequency of pass-band and rejection-band show the validity of the theory. This manufactured filter was installed on 100GHz band SiS (superconductor insulator superconductor ) receiver for observing cosmic radio waves and tested. We found that this filter can be used a single side-band as well as double side-band mode. The design method which is presented in this paper can be used a single side-band filter for a heterodyne type sub-milimeter wave receiver.

  • PDF

A New Control Method of Series Single-Phase Hybrid Active Power Filter (직렬형 단상 하이브리드 능동 전력필터의 새로운 제어법)

  • Kim, Jin-Sun;Kim, Young-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2005.04a
    • /
    • pp.149-151
    • /
    • 2005
  • This paper deals with the novel control algorithm of single-phase hybrid active power filter for the compensation of harmonic current components in nonlinear R-L load with passive active power filters. To construct two-axes coordinate, an imaginary second phase was made by giving time delay to line current. In this proposed method, the new signal, which was the delayed through the filtering by the phase-delay property of low-pass filter, is used as the secondary phase. Because two phases have different phase, instantaneous calculation of harmonic current is possible. In this paper, a reference voltage is created by multiplying gain of filter by compensation current using the rotating reference frames that synchronizes with source-frequency, not applying to instantaneous reactive power theory which has been used with the existing fixed reference frames. This paper shows the experimental results, which provide a high accuracy and extremely fast response of single-phase hybrid active Bower filter under the operation with the proposed control method.

  • PDF

Design and Fabrication of a PD Detector for Power Cable Diagnosis (전력케이블 진단을 위한 부분방전 검출장치의 설계 및 제작)

  • Song Jae-Yong;Seo Hwang-Dong;Kil Gyung-Suk;Han Moon-Soeb;Jang Dong-Uk
    • Proceedings of the KSR Conference
    • /
    • 2005.11a
    • /
    • pp.777-782
    • /
    • 2005
  • In this paper, we designed and fabricated a partial discharge (PD) detector to diagnose the soundness of CNCV cables by analyzing PD pulses and to predict discharge locations. The PD detector is consisted of a coupling network with a discharge free capacitor and a detection impedance, a voltage follower and a low noise amplifier. Lower cut-off frequency of the detector is adjusted at 175kHz to block AC voltage and to pass discharge pulse only. The discharge location could be obtained by the time of arrival method using travelling wave propagation theory. In a laboratory test on an eighty meter CV cable, we could position the discharge location within a two meter error.

  • PDF

Full Color image generation using binary phase holograms (이진 위상 홀로그램을 이용한 칼라 영상의 구현)

  • 서호형
    • Korean Journal of Optics and Photonics
    • /
    • v.10 no.4
    • /
    • pp.323-327
    • /
    • 1999
  • In this paper, the novel and simple scheme of producing full color image bye use of binary phase holograms and three lasers of red (632.8 nm), green (543.5 nm), and blue (488 nm) is presented. Three holograms are designed and fabricated separately so that different laser beams can pass through the different holograms. The diffracted beams from the holograms constitute the wanted color image at the focal plane. The theory and experimental results of the system are also presented.

  • PDF