• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.397-402
• /
• 2003

This paper concerns a pulse-width-modulation (PWM) controller design technique using digital redesign. Digital redesign is to convert a well-designed analog controller into an equivalent pulse-amplitude-modulation (PAM) controller maintaining the original analog control system in the sense of state-matching. In similar line of conversion concept, the redesigned PAM controller is converted into a PWM controller using the equivalent area principle. To convincingly visualize the proposed technique, an computer simulation example-attitude control of artificial satellite system is included.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.357-358
• /
• 2005

Compact power amplifier modules (PAM) for WCDMA/KPCS and GSM/WCDMA dual-band applications based on multilayer low temperature co-fired ceramic (LTCC) substrates are presented in this paper. The proposed modules are composed of an InGaP/GaAs HBT PAs on top of the LTCC substrates and passive components such as RF chokes and capacitors which are embedded in the substrates. The overall size of the modules is less than 6mm $\times$ 6mm $\times$ 0.8mm. The measured result shows that the PAM delivers a power of 28 dBm with a power added efficiency (PAE) of more than 30 % at KPCS band. The adjacent-channel power ratio (ACPR) at 1.25-MHz and 2.25-MHz offset is -44dBc/30kHz and -60dBc/30kHz, respectively, at 28-dBm output power. Also, the PAM for WCDMA band exhibits an output power of 27 dBm and 32-dB gain at 1.95 GHz with a 3.4-V supply. The adjacent-channel leakage ratio (ACLR) at 5-MHz and 10-MHz offset is -37.5dBc/3.84MHz and -48dBc/3.84MHz, respectively. The measured result of the GSM PAM shows an output power of 33.4 dBm and a power gain of 30.4 dB at 900MHz with a 3.5V supply. The corresponding power added efficiency (PAE) is more than 52.6 %.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.374-381
• /
• 2010

Typical power electronic converters employ only pulse width modulation (PWM) to generate specific switching patterns. In this paper, a novel control strategy combining both pulse-width and amplitude modulation strategies (PWAM) has been proposed for power converters. The Pulse Amplitude Modulation (PAM), used in communication systems, has been applied to power electronic converters. This increases the degrees of freedom in eliminating or mitigating harmonics when compared to the conventional PWM strategies. The role of PAM in the novel PWAM strategy is based on the control of the converter's dc sources values. Software implementation of the conventional PWM and the PWAM control strategies has been applied to a five-level inverter for mitigating selective harmonics. Results show the superiority of the proposed strategy from the THD point of view along with a reduction in the inverter power dissipation.

• Journal of Convergence for Information Technology
• /
• v.11 no.5
• /
• pp.9-16
• /
• 2021

In binary-modulation non-orthogonal multiple access (NOMA), there has been rare researches for the 1+1 capacity region to be achieved; how much total power is required and what power allocation is assigned for this total power. In this paper, the average total transmitted power to achieve 1+1 capacity region of binary pulse amplitude modulation (2PAM) NOMA is investigated, with a tolerable loss. Then, based on the sufficient average total transmitted power, we calculate the power allocation coefficient to achieve 1+1 capacity region. Furthermore, it is shown by numerical results that with the tolerable loss less than 0.008, near 1+1 capacity region is achieved. We also calculate numerically the power allocation coefficient for both users to achieve near 1+1 capacity region. As a result, for 2PAM NOMA to operate near 1+1 capacity region, proper total power with appropriate power allocation could be calculated in design of NOMA systems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.71-78
• /
• 2009

An 8${\times}$8-Gb/s/channel 4-PAM transceiver was designed for high speed memory applications by using 70nm DRAM process with 1.35V supply. An asymmetric 4-PAM signaling scheme is proposed to increase the voltage and time margin of upper and lower eyes in 3-class eye opening. A mathematical basis shows that this scheme statistically reduces 33% of reference noise effect in a receiver. Also, an adaptive pre-emphasis scheme, which utilizes a lone-bit pulse with integrator at the receiver, is introduced to reduce ISI for a simple DRAM channel. In this scheme, an integrating clock timing calibration by using a pre-determined pattern is proposed for the optimum ISI measurement.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.191-199
• /
• 2006

This paper presents an efficient pre echo control scheme for MPEG Audio coders based on the psychoacoustic model II (PAM-II). Pre echo control is the final step for the calculation of masking threshold in the PAM II. It is to minimize the spread of quantization error over the processing frame. In the conventional encoders, pre echo is reduced by restricting the estimated masking threshold not to exceed the one obtained in the previous frame. The conventional method performs pre echo control not only for short blocks but also for long blocks, which lowers the masking threshold in long blocks and, in turn, increases the quantization noise level of corresponding blocks. This paper proposes an efficient pre echo control process. The test result shows a mean enhancement of more than 0.4 especially for complex signals on the ITU R 5 point audio impairment scale.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1311-1316
• /
• 2014

To be used in a transmitter of a satellite transponder of this paper, X band 25W power amplifier module, a part constituting of high-power amplifier is transmitted to the equipment for transmitting to geostationary communications satellites(36,000Km distance). PAM consisted a total of four power amplifier module has a high output characteristic of the high-output amplifier is used in the ground station. Used in conjunction with the structured type power amplifier module is composed of Serial Combining Structure. This PAM(Power Amplifier Module) configured by combining the circuit with the power amplifier, 10 MMIC chips and the Al2O3 thin film substrate using a Hybrid Technique of power amplifier module, was implemented at X band PAM(Power Amplifier Module) of 25W grade.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.1
• /
• pp.36-44
• /
• 1998

Background: IFN-$\gamma$ is known to activate mononuclear phagocytes and to mediate host defense mechanism against some intracellular microorganisms, but little is known about anti-mycobacterial activity and mechanism of IFN-$\gamma$ in human. In this study, we investigated the role of IFN-$\gamma$ in the pathogenesis of tuberculosis by observing the effect of IFN-$\gamma$ on the phagocytosis of M.tuberculosis(MTB) and on the production of TNF-$\alpha$ by human pulmonary alveolar macrophage. Method: Pulmonary alveolar macrophage(PAM) were prepared with adhesion purification method from bronchoalveolar lavage fluid obtained from 8 persorn without active lung lesion and cultured($1{\times}10^6cells/ml$) with MTB($3{\times}10^7$ bacteria/ml) with or without IFN-$\gamma$(300U/ml), LPS(0.5ug/ml) and autologous serum(10%). After 2 hours, the percentage of PAM-phagocytosed MTB was counted after AFB staining(modified Kynion method). TNF-$\alpha$ production by PAM stimulated by IFN-$\gamma$(300U/ml), MTB($1{\times}10^6bacteria/ml$) and LPS(0.5ug/ml) for 24hours was measured in culture supernatant using ELISA method. The degree of phagocytosis of MTB by PAM stimulated with IFN-$\gamma$(300U/ml) and LPS(0.5ug/ml) for 24hours was also investigated. Results: IFN-$\gamma$ did not influence the phagocytosis of MTB by PAM(percentage of PAM-phagocytosed MTB: control: $22.1{\pm}4.9$, IFN-$\gamma$: $20.3{\pm}5.3$) and did not increase TNF-$\alpha$ production by PAM (control: $21{\pm}38pg/ml$, IFN-$\gamma$: $87{\pm}106pg/ml$), and the degree of phagocytosis of MTB by PAM pre-stimulated with IFN-$\gamma$ for 24 hours, was not increased (control: $24.5{\pm}9.5$, IFN-$\gamma$: $23.4{\pm}10.1$). Conclusion: IFN-$\gamma$ does not influence on the phagocytosis of MTB and TNF-$\alpha$ production by PAM.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.50-59
• /
• 1994

The pan-european paging system European Radio MEssage System (ERMES), a new system of digital information communication, has 16 channels with 25KHz channel spacing. The ERMES modulation format is 4-PAM/FM. The ERMES operates in the frequency range 169.4125MHz$\~$169.8125MHz. In this paper, an ERMES receiving system according to the European Telecommunication Standard Institute(ETSI) specfication with a double error correction capability is designed. The ERMES receiver system is designed with the conventional circuit and its error performance for muitiple signal modulated by the 4-PAM/FM method are analyzed. Since amplitude imbalance among the signal components can impair the system performance when several receivers are operated on the same RF channel simultaneously, the optimal parameters are obtained in designing the radio system. Performance of the proposed receiver system is verified via computer simulation for processing procedure.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.211-218
• /
• 2008

The performance of positive plates depends on the structure of the lead dioxide active mass. The positive active materials (PAM) consists of a skeleton, built up of agglomerates and macropores. Agglomerates, in their turn, comprise particles and micropores. This paper described a study conducted to determine the effects of different soaking times between the acid fill and formation stages of the tubular plate production. For the positive plates a lead oxide were filled into tubular bag with a red lead. After filling the positive plates were soaked in $H_2SO_4$ solution. X-ray diffraction(XRD), scanning electron microscopy(SEM) and electrical testing had been used to study the compositional and morphological aspects of the positive active material(PAM) just prior and after formation. Results indicate that PAM compositions were effected by the soaking time and acid density of $H_2SO_4$ solution. It can be seen that as the soaking time duration increases, $\alpha$-PbO, $Pb_3O_4$, and Pb were all gradually sulphating. Composition of 3BS reached a maximum at around 3 h duration and $H_2SO_4$ of sp. gr. 1.10 on soaking. This results would suggest that the most beneficial conditions for soaking were the $H_2SO_4$ of sp. gr. 1.10 and 2 to 6 h of soaking.