• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.76-81
• /
• 2011

A new via cutting structure in 2-layer DRAM package substrate has been fabricated to lower its power distribution network(PDN) impedance. In new structure, part of the via is cut off vertically and its remaining part is designed to connect directly with the bonding pad on the package substrate. These via structure and substrate design not only provide high routing density but also improve the PDN impedance by shortening effectively the path from bonding pad to VSSQ plane. An additional process is not necessary to fabricate the via cutting structure because its structure is completed at the same time during a process of window area formation. Also, burr occurrence is minimized by filling the via-hole inside with a solder resist. 3-dimensional electromagnetic field simulation and S-parameter measurement are carried out in order to validate the effects of via cutting structure and VDDQ/VSSQ placement on the PDN impedance. New DRAM package substrate has a superior PDN impedance with a wide frequency range. This result shows that via cutting structure and power/ground placement are effective in reducing the PDN impedance.

• Science of Emotion and Sensibility
• /
• v.18 no.3
• /
• pp.93-106
• /
• 2015

In accordance with escalating demands for advanced technology products, the smart clothing that includes embedded ICT technology have expanded into fields of daily life. As a result of this trend, interest in smart clothing with digitally controllable heating has rapidly grown and the market for smart heated clothing has also expanded. Increasing of prospect in smart heated clothing market, the effectiveness and thermal sensation research of the location on the pad attached is insufficient. This study was conducted to find the optimal location of heated clothing via experimental research on changes in skin temperature and subjective thermal sensation when heating pads were placed on different areas of the body. For this experiment, the subjects consisted of 10 males in their 20's of standard physique. The skin temperature at 11 different areas of the body, rectal temperature, and subjective thermal sensation were taken at different stages (before testing, after a 20 minute rest period, 20 minute treatment period, and after a 40 minute recovery period) in an artificial-climate chamber at $-5^{\circ}C$. As a result, the optimal location for heating pads in smart clothing was estimated and suggested.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.82-82
• /
• 2010

표면실장 공법을 통해 CSP 패키지를 보드에 실장 하는데 있어 무연솔더 접합부의 신뢰성에 영향을 미치는 인자 중 가장 중요한 것은 접합부에 형성되는 IMC (Intermetallic compound, 금속간화합물)인 것으로 알려져 있다. 접합부의 칩 부분에는 솔더와 칩의 UBM (Under bump metalization)이 접합하여 IMC가 형성되나, 보드 부분에는 솔더와 보드의 UBM 뿐만 아니라 그 사이에 솔더 페이스트가 함께 접합되어 IMC가 형성된다. 본 연구에서는 패키지의 신뢰성 연구를 위해 솔더 페이스트의 유무 및 두께에 따른 무연 솔더 접합부의 미세조직의 변화를 분석하였다. 본 실험에서는 Sn-3.0(Wt.%)Ag-0.5Cu 조성과 본 연구진에 의해 개발된 Sn-Ag-Cu-In 조성의 직경 $450{\mu}m$ 솔더 볼을 사용하였으며, 솔더 페이스트는 상용 Sn-3.0Ag-0.5Cu (ALPHA OM-325)를 사용하였다. 칩은 ENIG (Electroless nickel immersion gold) finish pad가 형성된 CSP (Chip scale package)를, 보드는 OSP (Organic solderability preservative)/Cu finish pad가 형성된 것을 사용하였다. 실험 방법은 보드를 솔더 페이스트 없이 플라즈마 처리 한 것, 솔더 페이스트를 $30{\mu}m$ 두께로 인쇄한 것, $120{\mu}m$의 두께로 인쇄한 것, 이렇게 3가지 조건으로 준비한 후, 솔더 볼이 bumping된 칩을 mounting하여, $242^{\circ}C$의 peak 온도 조건의 oven(1809UL, Heller)에서 reflow를 실시하여 패키지를 형성하였다. 이후 시편은 정밀 연마한 후, OM(Optical Microscopic)과 SEM(scanning electron microscope) 및 EDS(energy dispersive spectroscope)를 사용하여 솔더 접합부 IMC의 미세조직을 관찰, 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1351-1358
• /
• 2014

This study numerically simulates brake squeal and validates it experimentally by using a lab-scaled brake dynamometer. The system frequencies of the disc brake are traced with respect to the brake pressure by using a modal test and FEM. Then, the squeal frequencies measured from the brake dynamometer are found to correspond to the brake system mode with the dominant displacement of the caliper and pad. Furthermore, a complex eigenvalue analysis conducted using the finite element model confirms that the caliper mode generating the rotational displacement of the pad becomes unstable owing to the negative friction-velocity slope.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.545-550
• /
• 2013

We present a tactile information transceiver using a friction-tunable slider-pad. While previous tactile information devices were focused on either input or output functions, the present device offers lateral position/vertical direction detection and texture expression. In characterizing the tactile input performance, we measured the capacitance change due to the displacement of the slider-pad. The measured difference for a z-axis click was 0.146 nF/$40{\mu}m$ when the x-y axis navigation showed 0.09 nF/$750{\mu}m$ difference. In characterizing the texture expression, we measured the lateral force due to a normal load. We applied a voltage between parallel electrodes to induce electrostatic attraction in DC and AC voltages. We measured the friction under identical fingertip action conditions, and obtained friction in the range of 32-152 mN and lateral vibration in the force range of 128.1 mN at 60 V, 2 Hz. The proposed device can be applied to integrated tactile interface devices for mobile appliances.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.63-63
• /
• 2011

비정질 반도체/절연체의 직류와 교류 전도도 스펙트럼은 주파수에 대한 거듭제곱의 법칙 (power-law)을 따르는 보편성이 있음이 확인되었다. 이러한 보편성은 다양한 비정질 반도체/절연체 물질에서 공통적으로 관찰되었으며 현재까지 이 보편성의 물리학적 원인이 정확히 규명되지 않고 있다. 이 보편성을 설명하기 위한 모델로서 비정질 반도체/절연체 내의 전자/정공의 호핑 전도기구 (hopping conduction mechanism)가 제시된 바 있으며 다양한 비정질 시스템의 전도도 스펙트럼 해석에 인용되고 있다. 그러나 직.교류 전도기구 사이의 상이함에 대한 이견이 있으며 현재까지 정확히 규명된 바 없다. 본 연구에서는 비정질 GeSe 반도성 물질의 전도도 스펙트럼을 10 Hz-1 MHz 주파수 대역에서 측정하였으며 이를 위해 백금 상.하부 전극을 갖는 크로스바(crossbar)형의 금속-절연체-금속구조의 2단자 소자를 제작하였다. 측정 스펙트럼으로부터 본 연구의 GeSe 물질이 앞서 언급한 비정질 물질의 보편성에 부합함을 확인하였으며 스펙트럼 내의 직류와 교류 성분을 명확히 분리할 수 있었다. 직.교류 전도도 스펙트럼의 명확한 기구 분리를 위하여 4개의 상이한 면적을 갖는 크로스바에 대한 측정을 실시하였으며 그 결과로 직.교류 전도도의 상이한 면적 의존성을 관찰하였고 이를 근거로 직.교류 전도도가 서로 다른 전도기구에 기인함을 간접적으로 알 수 있었다. GeSe의 전도도 스펙트럼의 온도 의존성 실험을 위해 시편의 온도를 20-300 K 범위에서 변화시키며 전도도 스펙트럼을 측정하였으며 이를 통해 교류 전도도 스펙트럼 내에 상이한 두 개의 전도 기구가 혼재해있음을 규명하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.774-787
• /
• 2011

This paper deals with quantitative analysis about the characteristics of GNSS(Global Navigation Satellite System) signals contaminated with multipath signals and day-to-day repeatability of the navigation solution and SNR(Signal to Noise Ratio) caused by multipath signals using the collected data from GPS receiver installed on KSLV-I which was on standby on the launch pad at Naro Space Center. Since the GPS antennas, surrounding environments and GPS satellite orbits were very slightly changed with respect to the day, the repeating pattern of the solution and SNR caused by the multipath signals was verified from the collected data. Analytic result of the multipath effects and day-to-day repeatability of the navigation solution and SNR observed at the launch pad would be used for obtaining more stable performance of the GPS receiver when the satellite launch vehicles are on standby.

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.138-148
• /
• 2000

In order to investigate the possibility of EPDM micro cellular pad (MCP) as an impact sound insulation product, we studied static/dynamic properties and vibration transfer characteristics of EPDM MCP depending on shape, thickness, degrees of foaming by using material test system (MTS) and lab scale mock-up test apparatus. Static/dynamic rigidity is increased when shape is simple. thickness and degrees of foaming low. We could see that dynamic stiffness is proportional to the transmissibility of EPDM MCP. When dynamic stiffness is increased, characteristic peak at transmissibility curve moves high frequency range or snows increase of maximum value of transmissibility. For lab scale mock-up test and finite element method, EPDM MCP shows low vibration velocity and superior mode shape to just concrete plus slab structure. We could confirm that possibility of EPDM MCP as a impact sound insulation product is high.

• Communications of Mathematical Education
• /
• v.32 no.4
• /
• pp.455-475
• /
• 2018

The purpose of this study is to investigate characteristics of pre-service teachers' cognition about learning through the use of technology by employing a teacher education program in the use of technology-friendly flipped classroom. For this purpose, 45 pre-service teachers participated in the study and they completed both pre- and post-surveys including questions about Technology Adopter Category Index(TACI) and Technological Pedagogical Content Knowledge(TPACK). They were also asked to write self-reflections on mathematics softwares(Geometer's Sketch Pad(GSP), Geogebra, Cabri 3D). Results show that the teacher education program in the use of technology-friendly flipped classroom affected pre-service teachers' cognitions of TACI and TPACK, and they perceived that technology integration helped students' mathematics learning process. Findings from this study indicate that ideas about how to develop a technology-friendly teacher education program are more specified..

• The Korea Journal of Herbology
• /
• v.22 no.4
• /
• pp.261-270
• /
• 2007

Objective : The 5-HMF was not index material suitable to do the quality control of Rehmanniae Radix Preparata. In this study, We estimated the changes of oligosaccharide contents in Rehmanniae Radix Preparata using high-performance anion-exchange chromatography with pulsed amperometric detection(HPAEC-PAD). Methods : The analysis of oligosaccharide was conducted by HPAEC-PAD with Carbopac PA1, $250{\times}4mm$, 5um, and Carbopac PA1 guard column. Column temperature was kept at $30^{\circ}C$. Elution was carried out at 1000 ${\mu}l/min$ with 70mM NaOH and the injection volume was $10{\mu}l$. Each component was detected by PAD. Results : Nine constituents were found from merchandising Rehmanniae Radix Preparata(MR), while seven constituents were found in various processed Rehmanniae Radix Preparata. Not all constituents were defined but stachyose and raffinose were found in all cases. And The most common constituents of Rehmanniae radix was stachyose. In the course of processing, most of stachyose and raffinose were decreased. Stachyose was decreased slowly in the course of processing with rice wine(RR), amomi and rice wine(AR), and crataegi and rice wine(CR). However stachyose was decreased rapidly in the course of processing with fresh rehmannia juice(FR). The method with crataegi and rice wine(CR) showed the smallest decrease of stachyose. And processing method with crataegi and rice wine(CR) showed the most abundant amount for stachyose after the nineth processing. Conclusion : The changes of oligosaccharides in the course of processing were a very important direct barometers to do the quality control and set up a standard of Rehmanniae Radix Preparata.