• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.7-10
• /
• 2006

A quasi-equilibrium model is used in order to aid movement and ballistic analysis for a propellant actuated device(PAD) system. The validity of the model is examined by experiments of a PAD system. The appropriateness of its usage for application was explored by comparing the tendency of experiments and analysis results, and the coefficients of friction and heat loss were obtained. The design method developed will be applied to the design of PAD systems.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2000.10b
• /
• pp.36-39
• /
• 2000

온실용 FAN ＆ PAD 시스템의 설계, 시공 및 운용에 필요한 기초자료를 제공하고자 FAN ＆ PAD 온실의 내부풍속변화와 차광에 따른 냉방성능을 실험적으로 분석한 결과를 요약하면 다음과 같다. 1. FAN ＆ PAD 시스템 온실의 내부풍속은 지면높이 80cm에서는 0.35㎧-1.25㎧ 범위에서 불규칙한 변화를 보였으며, 지면높이 210cm에서는 0.63㎧-1.06㎧ 범위에서 다소 규칙적인 변화를 보였다. 그리고, PAD측 풍속은 지면높이 80cm에서는 평균 0.2㎧, 지면높이 210cm에서는 평균 1.16㎧로 규칙적인 변화를 보였다. 2. 주간(10:00-18:00)에 외기온이 28.2$^{\circ}C$-35.1$^{\circ}C$(평균 31.5$^{\circ}C$)범위에서 변화할 때 FAN ＆ PAD 온실의 내부온도는 외기온보다 평균 2.4$^{\circ}C$-2.7$^{\circ}C$정도 낮게 나타났으며 무차광시 냉방효과가 최고 3.2$^{\circ}C$ 감소하는 것으로 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1892-1894
• /
• 2004

We have suggested the moxa-pad cauterizer especially for knee arthralgia. We have researched the variation on knee heat generating by the moxa-pad moxibustion cauterizer. The experimental demonstrations have been made by the stimulating the spots which are G-34(Gall-bladder Meridian 34), Sp-9(Spleen Meridian 9), and Liv-3(Liver Meridian 3) acupuncture points. And stimulating time was one hour with moxa-pad cauterizer.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.8
• /
• pp.37-44
• /
• 2008

Nowadays, the increasing global competition forces manufacturer to reduce the cost and time for implementation of manufacturing system. The AR(augmented reality) technology as a new human-machine interface introduces a noteworthy perspective for a new manufacturing system design. Using AR technology, a physically existing production environment can be superimposed with virtual planning objects. Therefore, the planning tasks can be validated without modeling the surrounding environment of the production domain during short process planning time. In this paper, we introduce the construction of AR browser and determine the optimal environment parameters for field application of AR system through lots of tests. And, many methods such as multi-marker coordinate system, division of virtual objects and so on, are proposed in order to solve the problems suggested from initial field test. Based on these tests and results, the test-bed of C/Pad assembly system is configured and robot program for C/Pad assembly is generated based on AR system.

• Journal of the Korean Home Economics Association
• /
• v.44 no.3 s.217
• /
• pp.91-102
• /
• 2006

The following research compares the two apparel systems that are used in Korean colleges, Gerber and PAD, by analyzing the advantages and disadvantages of their Dart-related functions in the pattern construction process. The results are as follows. 1. Regarding transformation methods, the Gerber system was able to use pivot method, while the PAD system was able to use both pivot method and slash methods. in other issues, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart could be produced only in the PAD system, while curvy shaped Dart could not be produced in either system. 2. The change in side lines due to the change of Dart width only occurred in the PAD system, while the change in Dart length only occurred in the Gerber system; both systems need improvement. 3. As for the pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes which need to be corrected. 4. We first constructed a Dart shape composition chart according to the number of Darts. Based on this, we examined whether they have appropriate shapes. Among single-Darts, the Gerber system had an inappropriate, outer-line shape for Underarm Dart and Center Front Dart, and among two-Darts, it was inappropriate for Side and Waist Dart.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.25-30
• /
• 2020

In this study, a test system which can test performance of curling pad was developed to support Korea curling team. The developed system consists of a water tank, a mechanical pad driving system that can perform sweeping movement using a curling pad on surface of ice made by the water tank, and temperature sensors monitoring ice and air temperatures. To control the temperature of ice and humidity/temperature of air around the ice, all system are installed in a chamber that can isolate the developed system from external environment. Eight kinds of curling pads were tested using the developed system. Test result showed that each curling pad revealed different rate of ice temperature increasing. The pad with the highest rate of ice temperature rising was found to be the same as the most preferred pad by the athletes. Therefore, it was confirmed that the method of measuring change of ice temperature by the sweeping performed in this study is an effective method to test the performance of the pad.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.499-505
• /
• 2007

The major effective of this study is to investigate the fatigue effects of rail pad on High Speed Railway with concrete slab track system. It analyzed the mechanical behaviors of HSR concrete slab track with applying rail pad stiffness based on fatigue effect (hardening and increasing stiffness) on the 3-dimensional FE analysis and laboratory test for static & dynamic characteristics. As a result, the hardening of rail pad due to fatigue loading condition are negative effect for the static & dynamic response of concrete stab track which is before act on fatigue effect. The analytical and experimental study are carried out to investigate rail pad on fatigue effected increase vertical acceleration and stress and decrease suitable deflection on slab track. And rail pad based on fatigue effect induced dynamic maximum stresses, the increase of damage of slab track is predicted by adopting fatigue effected rail pad. after due consideration. The servicing HSR concrete slab track with resilient track system has need of the reasonable determination after due consideration fatigue effect of rail pad stiffness which could be reducing the effect of static and dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.176-181
• /
• 2011

The fan and pad evaporative cooling system is one of the main cooling methods in greenhouses. Its efficiency is very high, but it has some disadvantages as temperature gradient in greenhouse is large. This study was conducted to reduce the internal temperature gradients in the fan and pad cooling greenhouses. Experiments on cooling performance were carried out in a greenhouse equipped with air duct and integrated fan and pad system as an idea of this study. It showed that the cooling efficiency of an integrated fan and pad system was 75.7% in the first stage and 88.6% in the second stage. When this cooling system was operated for an unshaded and a shaded greenhouse, there were cooling effects of $5.7\sim7.6^{\circ}C$ and $7.4\sim9.7^{\circ}C$ to the control greenhouse, respectively. Maximum temperature differences in a cooling greenhouse, with a length of 18m, were $1.6\sim1.7^{\circ}C$ for shaded conditions and $2.3\sim2.7^{\circ}C$ for unshaded conditions. This greenhouse cooling method, with air duct and integrated fan and pad system, can reduce about 40~50% of the internal temperature gradients in the usual fan and pad cooling greenhouses.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.1089-1092
• /
• 2013

컴퓨터 하드웨어의 발달로 인해 하드웨어의 성능을 충분히 발휘할 수 있는 소프트웨어의 개발이 요구되고 있다. 소프트웨어가 복잡해질수록 개발 시 인적 비용, 물적 비용, 시간 비용이 증가하는데, 실제 개발 비용보다는 개발 후 유지보수에 사용되는 비용이 훨씬 크다. 유지보수는 코드 수정을 통해 이루어지는데, 다른 사람이 작성한 코드를 수정할 경우에는 코드의 이해가 요구된다. 코드는 흐름도를 이용하게 되면 좀 더 쉽게 이해할 수 있는데, 복잡한 코드를 흐름도로 작성할 경우 흐름도가 자체가 복잡해져서 코드 이해가 어려워지는 경우가 많다. 이러한 단점을 보완하기 위한 방법의 하나로 1979년 PAD가 개발되었다. 이 논문은 C 소스코드를 입력받아 PAD를 자동으로 생성하는 시스템을 제안한다. 이 시스템을 이용하면 유지보수 비용에 소비되는 시간과 노력을 절약할 수 있을 것으로 생각된다.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.874-877
• /
• 2018

Many SMDs (surface mount device) are mounted and mutually connected on a PCB (printed circuit board). System performance degrades when their transmission characteristics are bad. Pads connecting a PCB and SMDs affects PCB transmission characteristics significantly, so pad should be properly aligned to optimize impedance matching. In this paper, effects on PCB transmission characteristics are simulated by pad alignment. When frequency is relatively low, pad alignment seldom affect PCB transmission characteristics, but it affects more and more when frequency or pad size becomes larger. Therefore, pad alignment should be carefully chosen based on target frequency and pad size. Especially, the proposed edge-aligned pad is generally more advantageous over the conventional centered-aligned pad in 12~16 GHz Ku-band frequency.