• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1047-1055
• /
• 2006

We patterned nano-width lines on a super hard bulk diamond substrate by varying the ion beam current and ion beam sources with a dual beam field ion beam (FIB). In addition, we successfully fabricated two-dimensional nano patterns and three-dimensional nano plate modules. We prepared nano lines on a diamond and a silicon substrate at the beam condition of 30 kV, 10 pA $\sim$ 5 nA with $Ga^+$ ion and $H_2O$ assisted ion sources. We measured each of the line-width, line-depth, etched line profiles, etch rate, and aspect ratio, and then compared them. We confirmed that nano patterning was possible on both a bulk diamond and a silicon substrate. The etch rate of $H_2O$ source can be enhanced about two times than that of Ga source. The width of patterns on a diamond was smaller than that on a silicon substrate at the same ion beam power The sub-100 nm patterns on a diamond were made under the charge neutralization mode to prevent charge accumulation. We successfully made a two-dimensional, 240 nm-width text of the 300-lettered Lord's Prayer on a gem diamond with 30 kV-30 pA FIB. The patterned text image was readable with a scanning electron microscope. Moreover, three dimensional nano-thick plate module fabrication was made successfully with an FIB and a platinum deposition, and electron energy loss spectrum (EELS) analysis was easily performed with the prepared nano plate module.

• Clinical and Experimental Pediatrics
• /
• v.52 no.9
• /
• pp.984-990
• /
• 2009

Purpose : Being small for gestational age (SGA) is a risk factor of short stature in children. Genetic background such as mid-parental height (MPH) is known to influence growth of children born SGA. We studied the relationship between growth of children born SGA and MPH and studied the effects of insulin-like growth factor (IGF-I) and insulin-like growth factor binding protein 3 (IGFBP-3) on postnatal growth in children born SGA according to MPH. Methods : Forty-nine neonates born SGA were included in this study. We defined corrected height standard deviation score (cHtSDS) by modified height SDS (HtSDS) based on their MPH. We categorized subjects into group 1 consisting of children with cHtSDS ${\geq}0$ (n=35) and group 2 consisting of children with cHtSDS <0 (n=14), and compared IGF-I and IGFBP-3 between the two groups. Results : The HtSDSs and cHtSDSs in groups 1 and 2 were $0.06{\pm}1.05$ vs. $-0.95{\pm}0.85$ (P=0.000) and $0.78{\pm}0.93$ vs. $-0.46{\pm}0.67$ (P=0.000), respectively. IGF-I SDS was higher in group 1 than in group 2 ($2.82{\pm}3.69$ vs. $0.23{\pm}2.42$, P=0.012). Total cHtSDS ($0.42{\pm}1.03$) was significantly higher than HtSDS ($-0.22{\pm}1.10$) (P=0.000). Conclusion : Our results show that cHtSDS differs significantly from HtSDS. Growth assessment by standardized growth curve does not uniformly show effects of genetic factors. A more accurate assessment of growth uses a personalized corrected growth curve that considers the genetic factor measured by MPH.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.19-27
• /
• 2009

Globally, customer appreciation and demand for quieter products has driven noise control engineers to develop efficient and quieter products in a relatively short time. In the vehicles and ship industry, noise has become an important attribute because of the competitive market and increasing customer awareness. Noise reduction is often achieved through structural modifications by typical approaches. In the present paper, author describes a fundamental study on optimum design of curvature. Bezier curve. and rib attachment to reduce noise from simple panel using a genetic algorithm(GA). The acoustic optimization procedure employed p-FEM for structural analysis, the Rayleigh integral method for acoustic analysis and the GA for searching optimum design. In the optimization procedure. the objective function to be minimized is the average sound power radiated from an objective structure over a given frequency range $0{\sim}300$ Hz.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.4
• /
• pp.284-291
• /
• 2001

To study whether N isotope composition (${\delta}^{15}N$) of crop reflects the kind of fertilizer (chemical or organic) applied to field, a pot experiment was conducted. Corn (Zea mays L.) was cultivated under greenhouse conditions for 70 days. Composted pig manure and urea were applied at 0 and 0 (C0U0), at 0 and 300 (COU2), at 300 and 0 (C2U0) and at 150 and $150kg\;N\;ha^{-1}$ (C1U1), respectively. The ${\delta}^{15}N$ values of composted pig manure and urea were + 13.9‰ and -2.3‰, respectively. The ${\delta}^{15}N$ values of whole parts (roots + stems + leaves + grains) were + 12.7, + 12.9, + 14.0 and + 13.0‰ for C0U0, C0U2, C2U0 and C1U1 treatments, and were not significantly affected by the application of isotopically different N sources (P<0.05). However, leaves or grains showed significantly (P<0.05) different ${\delta}^{15}N$ values between treatments. The ${\delta}^{15}N$ values of leaves and grains were + 14.3 and + 16.2‰ for C2U0, +13.2 and +13.9‰ for C0U0, +10.1 and + 12.6‰ for C1U1 and +10.1 and +12.4‰ for C0U2 treatments. The different ${\delta}^{15}N$ values of corn from the values of N sources (compost and urea) applied to soil showed that the ${\delta}^{15}N$ values of corn were affected not only by the isotope composition of N source, but also by N pool mixing and isotope fractionation accompanying N transformation. This study suggests that although the ${\delta}^{15}N$ values of crop are not identical to the ${\delta}^{15}N$ values of N sources applied to fields, the application of isotopically different N sources such as compost and chemical fertilizer may result in qualitative difference in ${\delta}^{15}N$ values of crop.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.342-342
• /
• 2016

최근 반도체 제조 공정 기술이 발전함에 따라, 나노 영역에서의 열 및 전기 특성에 관련하여 깊이 있는 연구들이 많이 수행되고 있다. 그 중 반도체 기판의 표면 거칠기는 열전도도 및 전하 이동도와 밀접한 관련이 있으며 나노 소자의 특성을 결정짓는 중요한 요소가 된다. 표면이 거친 정도에 따라 포논 산란 작용이 열적 특성에 영향을 미치며 표면 거칠기와 상응하는 포논의 파장은 이를 산란시켜 열전도도를 감소시키는 것으로 보고되었다[1]. 또한, 트랜지스터의 소형화에 따라 수직 전계가 증가하며 그 결과, 표면 거칠기 성분이 표면에서의 전자 및 홀의 이동 특성에 영향을 미친다. 따라서 원자 층 두께의 표면 거칠기의 중요성이 부각되며 이에 대한 물성 연구가 수행되어야 한다. <100> 벌크 실리콘에서 약산 용액인 500-MIF를 이용하여 시간에 따라 dipping을 진행한 후 표면 거칠기의 변화를 profiler (Tencor P-2)로 측정하여 확인하였다. 거칠기는 dipping을 시작한 후 10분부터 18분까지 약 $3{\AA}/min$의 변화를 가지는 것으로 관측이 되었다. 또한 Hall measurement system으로 벌크 실리콘에서의 온도에 따른 전하 이동도를 측정하였다. 측정 결과, 300 K일 때 p-type 벌크 실리콘의 전형적인 전하 이동도 값인 약 $450cm^2/V{\cdot}s$을 얻었으며, 저온에서는 높은 이동도를 가지다가 온도가 증가할수록 이동도가 감소하는 형태를 확인하였다. 서로 다른 표면 거칠기를 가지는 반도체 기판을 저온부터 상온 이상까지 온도의 변화를 주어 그에 따른 전하 이동도를 측정하고 열전도도 및 전하 이동도의 특성을 분석하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.99-107
• /
• 1997

The effect of easily decomposable organic carbon (methanol) application on the behavior of nitrogen derived from surface-applied urea in submerged soil was investigated. Two rates of urea (150 & $300kg-N\;ha^{-1}$) and three levels of methanol (2, 4, 8 ml) were applied to 10 g soil samples. The samples were incubated for 30 days under submerged conditions. The flood water and the soil were sampled for analysis of urea-N, $NH_4-N$ and $NO_3-N$ every 10 days. Urea-N in flood water and in soil at the rate of $150kg-N\;ha^{-1}$ and that in flood water at the rate of $300kg-N\;ha^{-1}$ were not detected but the urea-N concentration in soil at the rate of $300kg-N\;ha^{-1}$ with 8 ml methanol treatment was 4.7 on the 10th day from incubation. $NH_4-N$ concentrations in flood water and in soil increased with increasing urea application rates whereas they decreased with increasing methanol treatment. $NO_3-N$ concentration in flood water and in soil were similar regardless of the urea and methanol application rates. The total amount of $NH_4-N$ in flood water and in soil decreased with increasing methanol treatment, 0 ml & 2 ml, whereas the total amounts of $NO_3-N$ in both flood water and soil increased slightly at higher rates of methanol treatment, 4 ml & 8 ml. The total amount of $NH_4-N$ in both flood water and soil increased up to 20 days of incubation whereas that of $NO_3-N$ in flood water and in soil decreased over incubation time.

• Journal of Gastric Cancer
• /
• v.4 no.4
• /
• pp.213-218
• /
• 2004

Purpose: The superficial spreading type of early gastric cancer has different clinicopathologic features from other types of early gastric cancer in terms of its invasiveness and lymph-node metastases. Therefore, we attempted to elucidate the pathological features, surgical procedures and patients prognoses. Materials and Methods: Clinical information was reviewed for patients who had undergone a gastrectomy for gastric cancer during an 8-year period ($1995\~2002$) at Dankook University Hospital and Ulsan University, with an average follow-up of 48 months. Three hundred (300) superficial spreading lesions were analyzed with respect to macroscopic type, lymph-node (LN) metastasis, recurrent pattern, survival rate and method of surgical operation. In addition, the clinicopathological features of the superficial spreading type were compared with those of 739 other patients with small-sized cancer. Results: In both groups, the IIc-type macroscopic lesion, the elevated subtype to be more specific, occurred most frequently. There was no significant difference in the method of surgery between the groups. The submucosal invasion was $39.8\%$ in small-sized cancer, and $61.7\%$ in superficial spreading cancer (P=0.005). The incidence of LN metastasis was $11.3\%$ in early gastric cancer, $7.8\%$ in small-sized cancer and $20.0\%$ in superficial spreading cancer (P=0.005). The incidence of lymphatic invasion was $4.6\%$ in small-sized cancer and $13.0\%$ in superficial spreading cancer (P=0.009). The incidence of recurrence was $1.4\%$ in small-sized cancer and $3.6\%$ in superficial spreading cancer. The overall 5-year survival rate was $84.8\%$ in superficial spreading cancer and $93.0\%$ in small-sized cancer (P=0.052). The 5-year diseasefree survival rate was $94.7\%$ in superficial spreading cancer and $87.5\%$ in small-sized cancer (P=0.053). Conclusion: The superficial spreading type of early gastric cancer tends to be more invasive and to show a higher incidence of lymph-node metastasis than small-sized early gastric cancer. A wide resection with extensive lymph-node dissection seems to be an appropriate treatment for a superficial spreading type of early gastric cancer.

• Journal of Life Science
• /
• v.11 no.6
• /
• pp.561-567
• /
• 2001

To isolate and purify fibrinolytic active substance from Sarcodon aspratus(N $H_4$)$_2$S $O_4$ precipitation, DE52 anion exchange column chromatography, Sephacryl-S 200gel filtration chromatography and Mono S cation FPLC were carried out and the characterizations of the purified enzyme were investigated. The bound active fraction on DE52 anion exchange column chromatography were eluted with 0.2 M NaCI and the fibrionlytic enzyme was purified after following Sephacryl-S200 gel fitration chromatography and Mono S cation EPLC. The specific activity of purified enzyme was 55.2 U/mg protein and increased 11.3 fold comparing crude extract and the yield was 49.5%. 12% SDS-PAGE electrophoresis and gel filtration chromatography revealed that Sarcodon aspratus fibrionloytic enzyme was highly purified and had 29.300 Da molecular weight. Enzyme activity of the purified fibrinolytic enzyme from Sarcodon aspratus was increased on higher pH and was stable until pH 10.5. On temperature dependent stability, the enzyme activity was decrease sharply but remained 25% relative activity on 8$0^{\circ}C$. This enzyme activity was inhibited by heavy metal ion, C $U^{2+}$ and $Co^{3+}$ with 68% and 38%, respectively. And also, the enzyme activity was inhibited with $Ca^{2+}$ chelator EDTA and serine protease inhibitor PMSF. These results from this study suggested that the fibrinolycit enzyme from Sarcodon aspratus is a serine protease and the enzyme activity was increased by $Ca^{2+}$ or $Mg^{2+}$ ion.n.ion.n.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.297-300
• /
• 1986

A trial paste fertilizer for rice was manufactured by a developed process using major raw materials of waste liquid from glutamic acid fermentation, urea, phosphoric acid, diammomium phosphate and potassium chloride with potassium hydroxide for pH adjust and both glycerin and $HB_4O$ for enhancing and maintaining dispersion of paste. The ratios of N, $P_2O_5$ and $K_2O$ for trial products of paste fertilizer were 10:15:13 for Japonica var., and 12.5:15:13 for Indica var., and it was 6.0 in pH and 1.45g/cc in specific gravity.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.375-381
• /
• 2005

Er:YAG laser has been considered a promising alternative to dental drill and many researches indicate that adjustment to variable parameters, including water flow rate, pulse energy and pulse repetition rate, can be made to improve ablation ability and efficiency of the laser. Of these parameters, addition of water spray during irradiation has been thought to ablate dental hard tissue more rapidly and safely. The purpose of this study was to investigate tooth ablation amount by Er:YAG laser irradiation as related to varied water flow rates added and, ultimately to find the most effective water flow rate for ablation. In addition, the temperature change of pulp chamber during irradiation was also monitored on the irradiated and opposite pulpal walls, respectively. An Er:YAG laser with contact mode was employed. Extracted human molars were split into two pieces for ablation experiment. Pulse energies of 200 and 300 mJ with a pulse repetition rate of 20 Hz and 5 water flow rates (1.6, 3.0, 5.0, 7.0, and 10.0 ml/min) were applied. Each irradiation was performed for 3 seconds. According to these parameters, experimental groups were divided into 10 subgroups which consisted of 5 specimens. For temperature experiment, another 5 tooth-specimens were prepared in the manner that pulp chamber was open through access cavity preparation and two temperature-measuring probes were placed respectively on the irradiated and the opposite walls of pulp chamber. From the experiment on ablation amount related to different water flow rates, it was shown that the least water flow rate of 1.6 ml/min ablated more than any other water flow rates (p<0.000). When the irradiation for 3 seconds, combined with the pulse repetition time of 20Hz and the water flow rate of 1.6 ml/min was done to tooth specimen, the temperature rise was not noticeable both on the irradiated and the opposite pulpal walls (less than 3$^{\circ}C$) and there was no significant difference in temperature rise between the two pulse energies, 200 and 300 mJ. From the results of this study, it is suggested that tooth ablation with Er:YAG laser can be done effectively and safely at a energy between 200 and 300 mJ/pulse and a pulse repetition rate of 20 Hz when the lasing is conjugated with the water flow rate of 1.6ml/min.