• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2289-2304
• /
• 1998

For the performance analysis and traffic control of ATM networks carrying video sequences, need an appropriate video traffic model. In this paper, we propose a new traffic model for MPEG compressed videos which are widely used for any type of video applications at th emoment. The proposed modeling scheme uses scene-based traffic characteristics and considers the correlation between frames of consecutiv GOPs. Using a simple scene detection algorithm, scene changes are modeled by state transitions and the number of GOPs of a scene state is modeled by a geometric distirbution. Frames of a scene stte are modeled by mean I, P, and B frame size. For more accurate traffic modeling, quantization errors (residual bits) that the state transition model using mean values has are compensated by autoregressive processes. We show that our model very well captures the traffic chracteristics of the original videos by performance analysis in terms of autocorrelation, histogram of frame bits genrated by the model, and cell loss rate in the ATM multiplexer with limited buffers. Our model is able to perrorm translations between levels (i.e., GOP, frame, and cell levels) and to estimate very accurately the stochastic characteristics of the original videos by each level.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.135.2-136
• /
• 2003

To characterize plasmids in Xanthomonu axonopodis pv. glycines, we isolated plasmids pAG1 from the strain AG1 and pXAG81 and PXAG82 from the strain Bra, respectively, and sequenced three plasmids. The size of plasmids, pAG1, pXAG81, and pXAG82 was 15,149-base pairs (bp), 26,727-bp, and 1,496-bp, respectively Fifteen and twenty six possible open reading frames (ORFs) were present in pAG1 and pXAG81, respectively. Only one ORF homologous to a rep gene of Xylella fastidiosa was present in pXAG82. pAG1 contained genes homologous to avrBs3, tnpA, tnpR, repA, htrA, three parA genes, M.XmaI, R.XmaI, and six hypothetical proteins. pXAG81 contained genes homologous to avrBs3, tnpA, tnpR, repA, htrA, two parA genes, pemI, pemK, mobA, mobB, mobC, mobD, mobE, trwB, traF, traH, ISxac2, and eleven hypothetical proteins. Based on DNA sequence analysis, we presume that pXAG81 is a conjugal plasmid. Interestingly, we found 0.5-kb truncated avirulence gene similar to aurXacE3 on the right border of avrBs3 homolgs of pAG1 and pXAG81. Two hundred twenty five isolates were analyzed to find aurBS3 or tra gene homologs by Southern hybridization. The numbers of avrBs3 homolog varied from 3 in AG1 to 8 in AG166. Two hundred seventeen isolates appeared to can conjugative plasmids (pXAG81 type), and thirty eight isolates appeared to carry non-conjugative plamids (pAGl type). This indicated that aurBs3 gene homologs might be spread by conjugation in X. axonopodis pv. glycines.

• 생명과학회지
• /
• 제19권5호
• /
• pp.566-572
• /
• 2009

S. marcescens KCTC 2172로부터 유전자 은행을 작성하여 재조합 클론 pDH3를 얻었으며, pDH3 유래의 서브클론을 작성하였다. 플라스미드 pPH4의 전염기서열 5,137 bp 영역을 결정한 결과 3개의 ORF가 있음을 확인하였다. 이들은 pst 오페론의 pstC, pstA, 및 pstB, 세 유전자를 동일 전사방향으로 코드하고 있었다. 타 세균의 유전자와 비교한 결과 S. marcescens의 pst 오페론은 pstS와 phoU가 결손되어 있다. 조절영역에는 CRP 결합영역과 pho box 서열이 존재하였다. 보고된 유전자와 상동성 조사결과, PstC 단백질은 Yersinia sp., Vibrio sp. 및 Pseudomonas sp.와는 49, 37, 33%의 상동성을, PstA 단백질은 Yersinia sp., Vibrio sp. 및 Pseudomonas sp.와 64, 51, 47%의 상동성을, PstB 단백질은 Methanocaldococcus sp., E. coli 및 Mycoplasma sp.와 60, 50, 48%의 상동성을 나타내었다. Pst 유전자들은 조절영역의 cAMP-CRP 복합체에 의해 in vivo에서 양성적으로 발현됨을 확인하였다. Pst 오페론을 포함하는 플라스미드를 도입한 대장균은 인산운송에 관여하는 능력을 확인하였다.

• 한국미생물·생명공학회지
• /
• 제32권3호
• /
• pp.199-205
• /
• 2004

Bifidobacterium longum SJ32 균주로부터 cloning한 sucrose phosphorylase 유전자를 포함하는 8.6 kb의 EclRI 단편의 염기서열을 결정하였다. 5개의 open reading frame이 존재하였고, 상동성 검색의 결과, sucrose대사에 관여하는 sucrose phosphorylase (ScrP), sucrose transporter (ScrT), GalR-LacI-type transcriptional regulator (ScrR) 유전자의 존재를 확인하였다. SJ32 균주의 scrPTR 유전자군은 다른 B. longum균주의 scrPTR과 배열이 동일하고, 각 유전자 산물이 아미노산 수준에서 94%이상의 상동성을 가지고 있지만, 주변 유전자는 다르게 나타나 B. longum균주 간의 scrPTR 유전자군의 horizontal transfer를 추정하게 한다. 대장균에서의 scrP와 scrT의 동시 발현은 세포 내로의 sucrose 유입을 증가시켜 sucrose phosphorylase의 활성 증가에 영향을 주는 것으로 나타나, scrT가 sucrose transporter유전자임을 뒷받침한다. 기존에 보고된 B. longum NCC2705균주의 유전체로부터 scrPTR외에도 sucrose대사에 관여하는 다양한 sucrose multiple transport system에 관여하는 유전자의 존재가 확인되어, B. longum이 다양한 sucrose유입체계를 보유하고 있음이 추정된다.

• Steel and Composite Structures
• /
• 제2권6호
• /
• pp.411-428
• /
• 2002

Non-linear large-displacement elasto-plastic finite element analyses are used to propose design recommendations for the eaves bracket of a cold-formed steel portal frame. Owing to the thinness of the sheet steel used for the brackets, such a structural design problem is not trivial as the brackets need to be designed against failure through buckling; without availability of the finite element method, expensive laboratory testing would therefore be required. In this paper, the finite element method is firstly used to predict the plastic moment capacity of the eaves bracket. Parametric studies are then used to propose design recommendations for the eaves bracket against two potential buckling modes of failure: (1) buckling of the stiffened free-edge into one-half sine wave, (2) local plate buckling of the exposed triangular bracket area.The results of full-scale laboratory tests on selected geometries of eaves bracket demonstrate that the proposed design recommendations are conservative. The use of the finite element method in this way exploits modern computational techniques for an otherwise difficult structural design problem.

• 한국통신학회논문지
• /
• 제34권8B호
• /
• pp.751-759
• /
• 2009

WLAN 기술의 진보로 댁내 망에서 비디오 스트리밍 서비스 같은 멀티미디어 서비스의 사용이 증가하고 있다. 하지만 비디오 스트리밍 서비스의 QoS를 제공하기 위해서는 전송 지연 및 프레임 손실률을 감소시키는 기술 연구가 필요하다. 그러므로 본 논문에서는 이러한 문제를 해결하기 위하여 IEEE 802.11e EDCA에서 스트리밍 서비스의 QoS 보장을 위한 동적버퍼 관리기술을 제안한다. 제안하는 동적버퍼관리기술은 프레임의 중요도와 버퍼에 새롭게 도착한 프레임의 가상전송지연을 고려하여 버퍼 내 HoL(Head of Line)의 프레임을 제거한다. 시뮬레이션 결과, 제안하는 버퍼관리기술은 중요도가 높은 I, P 프레임의 손실률을 감소시키고 전송지연 시간을 안정화시키므로 비디오 스트리밍 서비스의 QoS를 보장할 수 있음을 살펴볼 수 있었다.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.37-66
• /
• 2019

In cold-formed steel structures, such as trusses, wall frames and portal frames, the use of back-to-back built-up cold-formed stainless-steel lipped channels as compression members are becoming increasingly popular. The advantages of using stainless-steel as structural members are corrosion resistance and durability, compared with carbon steel. The AISI/ASCE Standard, SEI/ASCE-8-02 and AS/NZS do not include the design of stainless-steel built-up channels and very few experimental tests or finite element analyses have been reported in the literature for such back-to back cold-formed stainless-steel channels. Current guidance by the American Iron and Steel Institute (AISI) and the Australian and New Zealand (gAS/NZS) standards for built-up carbon steel sections only describe a modified slenderness approach, to consider the spacing of the intermediate fasteners. Thus, this paper presents a numerical investigation on the behavior of back-to-back cold-formed stainless-steel built-up lipped channels. Three different grades of stainless steel i.e., duplex EN1.4462, ferritic EN1.4003 and austenitic EN1.4404 have been considered. Effect of screw spacing on the axial strength of such built-up channels was investigated. As expected, most of the short and intermediate columns failed by either local-global or local-distortional buckling interactions, whereas the long columns, failed by global buckling. All three grades of stainless-steel stub columns failed by local buckling. A comprehensive parametric study was then carried out covering a wide range of slenderness and different cross-sectional geometries to assess the performance of the current design guidelines by AISI and AS/NZS. In total, 647 finite element models were analyzed. From the results of the parametric study, it was found that the AISI & AS/NZS are conservative by around 10 to 20% for cold-formed stainless-steel built-up lipped channels failed through overall buckling, irrespective of the stainless-steel grades. However, the AISI and AS/NZS can be un-conservative by around 6% for all three grades of stainless-steel built-up channels, which failed by local buckling.

• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.519-538
• /
• 2013

The design optimization of a cold-formed steel portal frame building is considered in this paper. The proposed genetic algorithm (GA) optimizer considers both topology (i.e., frame spacing and pitch) and cross-sectional sizes of the main structural members as the decision variables. Previous GAs in the literature were characterized by poor convergence, including slow progress, that usually results in excessive computation times and/or frequent failure to achieve an optimal or near-optimal solution. This is the main issue addressed in this paper. In an effort to improve the performance of the conventional GA, a niching strategy is presented that is shown to be an effective means of enhancing the dissimilarity of the solutions in each generation of the GA. Thus, population diversity is maintained and premature convergence is reduced significantly. Through benchmark examples, it is shown that the efficient GA proposed generates optimal solutions more consistently. A parametric study was carried out, and the results included. They show significant variation in the optimal topology in terms of pitch and frame spacing for a range of typical column heights. They also show that the optimized design achieved large savings based on the cost of the main structural elements; the inclusion of knee braces at the eaves yield further savings in cost, that are significant.

• 천문학회지
• /
• 제34권2호
• /
• pp.111-117
• /
• 2001

Recently, we have set up a new digital CCD camera system, MicroMax YHS-1300 manufactured by Roper Scientific for Ha observation by Solar Flare Telescope at Bohyunsan Optical Astronomy Observatory. It has a 12 bit dynamic range, a pixel number of 1300$\times$1030, a thermoelectric cooler, and an electric shutter. Its readout speed is about 3 frames per second and the dark current is about 0.05 e-/p/s at $-10^{\circ}C$. We have made a system performance test by confirming the system linearity, system gain, and system noise that its specification requires. We have also developed a data acquisition software which connects a digital camera con-troller to a PC and acquires H$\alpha$ images via Microsoft Visual C++ 6.0 under Windows 98. Comparisons of high quality H$\alpha$ images of AR 9169 and AR 9283 obtained from SOFT with the corresponding images from Learmonth Solar Observatory in Australia confirm that our H$\alpha$ digital observational system is performed properly. Finally, we present a set of H$\alpha$ images taken from a two ribbon flare occurred in AR 9283.

• 한국축산식품학회지
• /
• 제40권5호
• /
• pp.746-757
• /
• 2020

Enterotoxigenic Escherichia coli (ETEC) is the major pathogenic E. coli that causes diarrhea and edema in post-weaning piglets. In this study, we describe the morphology and characteristics of ØCJ19, a bacteriophage that infects ETEC, and performed genetic analysis. Phage ØCJ19 belongs to the family Myoviridae. One-step growth curve showed a latent phase of 5 min and burst size of approximately 20 phage particles/infected cell. Phage infectivity was stable for 2 h between 4℃ and 55℃, and the phage was stable between pH 3 and 11. Genetic analysis revealed that phage ØCJ19 has a total of 49,567 bases and 79 open reading frames (ORFs). The full genomic sequence of phage ØCJ19 showed the most similarity to an Escherichia phage, vB_EcoS_ESCO41. There were no genes encoding lysogeny, toxins, virulence factors, or antibiotic resistance in this phage, suggesting that this phage can be used safely as a biological agent to control ETEC. Comparative genomic analysis in terms of the tail fiber proteins could provide genetic insight into host recognition and the relationship with other coliphages. These results showed the possibility to improve food safety by applying phage ØCJ19 to foods of animal origin contaminated with ETEC and suggests that it could be the basis for establishing a safety management system in the animal husbandry.