• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.503-526
• /
• 1996

A synoptic survery of chemical characteristics in the last Sea of Korea was carried out at the 11 stations near Ullungdo in November, 1994 on board R/V Tam-Yang. On the basis of the vortical distribution patterns of temperature, salinity and dissolved oxygen, water masses in the study area are divided into five groups; 1) Tsushima Surface Water (TSW), 2) Tsushima Middle Water (TMW), 3) East Sea Intermediate Water (ESIW), 4) last Sea Proper Water (ESPW), 5) Mixed Water (MW). In the vertical profiles of nutrients, the concentrations were very low in the surface layer and increased rapidly near the thermocline. There was a slight decrease in the ESIW and the concentrations were constant with the depth below 300m except dissolved silicate which still increased with depth. Relatively high value of Si/P ratio (25.2) in ESPW, whick is the oldest water mass, suggests that Si is regenerating more slowly compared to other nutrients. The relatively high value of N/P ratio (18.6) in the surface layer might be related to high vertical eddy diffusivity $(K_z)$ of $1.19\;cm^{2}/sec$ and high nitrate upward flux of $103.7\;{\mu}g-at/m^{2}/hr$, compared to the values reported in other areas. Apparent Oxygen Utilization (AOU) was very low in the surface layer and increased in the TMW, but there was a slight decrease in the ESIW. The highest value of AOU occurred in the ESPW. The slpoe of P/AOU was 0.50. The study on the relationship between water masses and nutrient distribution patterns is important in understanding the regeneration processes of nutrients in the polar region of the last Sea.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.575-585
• /
• 2013

This research was performed to evaluate the recycling feasibility as a construction material of dredged harbor soil mixed with clay and glass frit. Concentration of heavy metals of the dredged soil from D harbor was severly high, showing Zn of 526.0~13,150.1 mg/kg. The dredged soil was maily composed of 48.30 wt% $SiO_2$, 16.60 wt% $Al_2O_3$, 10.10 wt% CaO, 7.75 wt% $Fe_2O_3$. The clay and the glass frit contained 70.82 wt% $SiO_2$ and $Al_2O_3$ 18.78 wt%, and 71.75 wt% $SiO_2$, 13.99 wt% CaO, 8.51 wt% $Na_2O$, respectively. After adding 10~40 wt% to the clay and sintering them at $1,000^{\circ}C$ or $1,100^{\circ}C$, the compressive strength of the sintered specimens showed $132.6{\sim}178.5kgf/cm^2$ or $581.2{\sim}793.7kgf/cm^2$, respectively. In case of SC46 with the addition 40 wt% of the dredged soil to the clay, the compressive strength ($793.7kgf/cm^2$) of specimen sintered at $1,100^{\circ}C$ was over 5 times higher than that at $1,000^{\circ}C$. The specimen mixed with 40 wt% of dredged soil, 60 wt% of clay and 1 wt% of glass frit satisfied the 1st grade standard for clay brick by KS L 4201. The results of all specimens by Korean Standard Leaching Test also satisfied the standard criteria.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.469-484
• /
• 2021

Rock mass classification results have a great influence on construction schedule and budget as well as tunnel stability in tunnel design. A total of 3,526 tunnels have been constructed in Korea and the associated techniques in tunnel design and construction have been continuously developed, however, not many studies have been performed on how to assess rock mass quality and grade more accurately. Thus, numerous cases show big differences in the results according to inspectors' experience and judgement. Hence, this study aims to suggest a more reliable rock mass classification (RMR) model using machine learning algorithms, which is surging in availability, through the analyses based on various rock and rock mass information collected from boring investigations. For this, 11 learning parameters (depth, rock type, RQD, electrical resistivity, UCS, V_p, V_s, Young's modulus, unit weight, Poisson's ratio, RMR) from 13 local tunnel cases were selected, 337 learning data sets as well as 60 test data sets were prepared, and 6 machine learning algorithms (DT, SVM, ANN, PCA & ANN, RF, XGBoost) were tested for various hyperparameters for each algorithm. The results show that the mean absolute errors in RMR value from five algorithms except Decision Tree were less than 8 and a Support Vector Machine model is the best model. The applicability of the model, established through this study, was confirmed and this prediction model can be applied for more reliable rock mass classification when additional various data is continuously cumulated.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.479-490
• /
• 2021

As a part of Korean accounting reforms through the improvement of the accounting and audit related systems, the amendment bill of 'Act on External Audit of Stock Compamies's was passed in the Natinal Assembly plenary session in 2017, the amended act has been enforced except some regulations since the business year on November 1, 2018, and all the amended matters will be applied from the business year of 2024. The reasons for auditor designation in 2019 are 'pre-IPO' 331 companies, 220 periodic designation companies, 197 companies that had operating loss for three consecutive years, 112 companies with issues for administration, 108 companies with excessive debt ratio and 66 companies with no auditors. Regarding the reasons for the increase of auditor designation, 475 companies were increased in accordance with the new designation standard by the amended bill of Act on External Audit of Stock Companies, 114 companies were increased due to the abolition of the considered designation system of companies to be listed, and 90 companies were increased based on the increase of listed companies incorporated to issues for administration. In 2020, 462 companies had periodical designation (434 listed, 28 non-listed), adding 242 companies (110%) over a year. In terms of direct designation, 'pre-IPO' accounted for the most (362 companies), followed by '3 consecutive years of operating loss' (245 companies), then by companies with administration issues (133 companies), and CEO & largest sharholder replacement. Regarding the designation of auditors according to accounting firms in 2020, A group that includes(top 4) accounting firms(Samil, Samjeong, Hanyeong, Anjin) had 526 companies(34.6%), which ia an incease of 72 companies from the previous year(454 companies, 37.1%), but the weight decreased by 2.5%.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.668-672
• /
• 2001

To investigate the oxygen free radical and alcohol metabolizing system in liver of rats fed diets with 30% ethanol extract of Lycium chinense (LCEE), Sprague-Dawley male rats weighing 225~235g have been fed a diet supplemented with 2% or 4% LCEE for a month. The rats fed LCEE supplemented diets gained less body weight compared with the control, and had no remarkable changes of liver function. In rats fed 2% LCEE supplemented diet, hepatic cytochrome P450 contents appeared to be increased, but catalase (204.88$\pm$20.06 $H_2O$$_2$nmoles/mg protein/min), and superoxide dismutase (13.18$\pm$0.74 Unit/mg protein) activities were significantly increased compared with control 120.28$\pm$26.99 $H_2O$$_2$nmoles/mg protein/min and 10.49$\pm$0.80 Units/mg protein). There was no difference in hepatic glutathione content, glutathione peroxidase, and glutathione-S-transferase ctivities between the rats fed LCEE suplemented diets and the control diet. On the other hand, hepatic alcohol dehydrogenase activity were not changed by LCEE feeding, but hepatic aldehyde dehydrogenase activities were significantly increased in rats fed both 2 and 4% LCEE diets(5.01$\pm$0.21 and 4.47$\pm$0.06 $\mu$moles NADPH/mg protein/min) compared with control (3.28$\pm$0.21 $\mu$moles NADPH/mg protein/min) and its Vmax value was 1.9 fold increased in rats fed 2% LCEE and 1.5 fold in those fed 4% LCEE compared with control. In conclusion, it is likely that rats receiving a diet supplemented with LCEE may have the oxygen free radicals and alcohol detoxication potential.

• Journal of dental hygiene science
• /
• v.11 no.6
• /
• pp.521-526
• /
• 2011

The purpose of this study was to evaluate the long term effect of school-based oral health program on decrease of dental caries among elementary school children. The subjects of this study were total 727 students of one elementary school in Deagu, Korea. They had received school-based oral health programs for more than one year since 2004. This school-based oral health program included regular oral examination, fluoride mouth-rinsing, pit-and-fissure sealing, APF gel application, tooth brushing instruction and take the xylitol tablet after lunch during school days. The subjects' oral health status were examined by two calibrated dentists every year from 2004 to 2009. The DMFS index of $1^{st}$ grade to $6^{th}$ grade experimental and control group was 0.07, 0.39, 0.55, 0.67, 0.81, 1.79 and 0.31, 0.86, 1.07, 1.04, 2.71, 3.08 respectively. It's significantly different in $5^{th}$ grade(p<0.001) and $6^{th}$ grade(p=0.018) when it compare with control group. This study partially showed effect of school-based oral health programs on decrements of dental caries. This program should be expanded widely among elementary school in Korea. Xylitol tablet also recommended to included in school-based oral health programs.

• Geomechanics and Engineering
• /
• v.10 no.4
• /
• pp.471-526
• /
• 2016

In order to investigate water flow characteristics after inrushing in process of karst tunnel excavation, numerical simulations for five case studies of water inrush from the tunnel floor are carried out by using the FLUENT software on the background of Qiyueshan high risk karst tunnel. Firstly, the velocity-distance curves and pressure-distance curves are drawn by selecting a series of probing lines in a plane. Then, the variation characteristics of velocity and pressure are analyzed and the respective optimized escape routes are made. Finally, water flow characteristics after inrushing from the tunnel floor are discussed and summarized by comparing case studies under the conditions of different water-inrush positions and excavation situations. The results show that: (1) Tunnel constructors should first move to the tunnel side wall and then escape quickly when water inrush happens. (2) Tunnel constructors must not stay at the intersection area of the cross passage and tunnels when escaping. (3) When water inrush from floor happens in the left tunnel, if tunnel constructors meet the cross passage during escaping, they should pass through it rapidly, turn to the right tunnel and run to the entrance. (4) When water inrush from floor happens in the left tunnel, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment in the vicinity of the right tunnel working face. In addition, some rescuing equipment can be set up at the high location of the cross passage. (5) When water inrush from floor happens in the cross passage, tunnel constructors should move to the tunnel side wall quickly, turn to the tunnel without water inrush and run to the entrance. (6) When water inrush from floor happens in the cross passage, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment near by the left or the right tunnel working face. The results are of important practical significance and engineering value to ensure the safety of tunnel construction.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.526-530
• /
• 2010

Isopentenyl diphosphate(IPP) isomerization to dimethylallyl diphosphate(DMAPP) is an important step for the efficient production of isoprenoids such as lycopene, ${\beta}$-carotene, astaxanthin, etc. The type II isopentenyl diphosphate isomerase gene from Synechocystis sp. PCC6803(sll1556, Syidi2) was cloned and expressed in Escherichia coli $DH5{\alpha}$. When E. coli $DH5{\alpha}$ harboring lycopene synthesis genes, crtE, crtB, and crtI and mevalonate pathway genes, MvK1, MvK2, and Mvd, was cultured on LB medium containing mevalonate, the strain grew very slowly be due to the toxicity of isopentenyl diphosphate derived from mevalonate. When Syidi2 was introduced to E. coli $DH5{\alpha}$ harboring the lycopene synthesis genes and mevalonate pathway genes, growth on mevalonate medium was fully restored and the colony showed red color indicating lycopene formation. The growth rate of the mutant strain, E. coli $DH5{\alpha}$(idi::${\Delta}km$), was very slow because of IPP accumulation and DMAPP deprivation. Ultimately the idi mutant was complemented by introducing the Syidi2 gene.

• Journal of Chest Surgery
• /
• v.50 no.4
• /
• pp.255-262
• /
• 2017

Background: Transcatheter aortic valve replacement (TAVR) has been suggested as a less invasive treatment for high-risk patients with aortic valve disease. I n this study, we compared the outcomes of conventional surgical aortic valve replacement (AVR) and TAVR in elderly patients aged over 80. Methods: A total of 108 patients aged 80 years or older who underwent isolated AVR (n=35) or TAVR (n=73) from 2010 through 2015 at Asan Medical Center were identified. Early and late clinical outcomes, including echocardiographic findings, were evaluated in both groups. The mean follow-up duration was $766.4{\pm}528.7days$ in the AVR group and $755.2{\pm}546.6days$ in the TAVR group, and the average timing of the last follow-up echocardiography was at $492.6{\pm}512.5days$ in the AVR group and $515.7{\pm}526.8days$ in the TAVR group. Results: The overall early mortality was 2.8% (0 of 35, 0% in the AVR group vs. 3 of 73, 4.1% in the TAVR group). Permanent pacemaker insertion was significantly more common in the TAVR group (p=0.010). Renal failure requiring dialysis and new-onset atrial fibrillation was more frequent and the length of hospital stay was longer in the AVR group; however, this difference did not reach statistical significance. In the TAVR group, 14 patients (19.2%) were rehospitalized due to cardiac problems, and 13 patients (17.8%) had developed significant paravalvular leakage by the time of the last follow-up echocardiography. Conclusion: TAVR could be a good alternative to conventional surgical AVR in elderly patients. However, TAVR has several shortcomings, such as frequent significant paravalvular leakage or readmission, which should be considered in decision-making.