• 한국재료학회지
• /
• 제18권2호
• /
• pp.84-91
• /
• 2008

The effects of the deposition and annealing temperature on the structural, electrical and optical properties of Ag doped ZnO (ZnO : Ag) thin films were investigated. All of the films were deposited with a 2wt% $Ag_2O-doped$ ZnO target using an e-beam evaporator. The substrate temperature varied from room temperature (RT) to $250^{\circ}C$. An undoped ZnO thin film was also fabricated at $150^{\circ}C$ as a reference. The as-grown films were annealed in temperatures ranging from 350 to $650^{\circ}C$ for 5 h in air. The Ag content in the film decreased as the deposition and the post-annealing temperature increased due to the evaporation of the Ag in the film. During the annealing process, grain growth occurred, as confirmed from XRD and SEM results. The as-grown film deposited at RT showed n-type conduction; however, the films deposited at higher temperatures showed p-type conduction. The films fabricated at $150^{\circ}C$ revealed the highest hole concentration of $3.98{\times}1019\;cm^{-3}$ and a resistivity of $0.347\;{\Omega}{\cdot}cm$. The RT PL spectra of the as-grown ZnO : Ag films exhibited very weak emission intensity compared to undoped ZnO; moreover, the emission intensities became stronger as the annealing temperature increased with two main emission bands of near band-edge UV and defect-related green luminescence exhibited. The film deposited at $150^{\circ}C$ and annealed at $350^{\circ}C$ exhibited the lowest value of $I_{vis}/I_{uv}$ of 0.05.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.419-420
• /
• 2008

In this study, high quality (Al,N)-codoped p-type ZnO thin films were obtained by DC magnetron sputtering. The film on buffer layer grown in 80% $N_2$ ambient shows highest hole concentration of $2.93\times10^{17}cm^{-3}$. The films show hole concentration in the range of $1.5\times10^{15}$ to $2.93\times10^{17}cm^{-3}$, resistivity of 131.2 to 2.864 $\Omega$cm, mobility of 3.99 to 31.6 $cm^2V^{-1}s^{-1}$. The films on Si show easier p-doping in ZnO than those on buffer layer. The film on Si shows the highest quality of optical photoluminescence (PL) characteristics. The donor energy level $(E_d)$ of (Al,N)-codoped ZnO films is about 50 meV and acceptor energy level $(E_a)$ is in the range of 63 to 71 meV. It will help to improve p-type ZnO films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.110-111
• /
• 2007

In order to form a p-type ZnO thin film, ZnO thin film is deposited by pulsed laser deposition(PLD) on GaAs substrate followed by nermal treatment that ensures the diffusion of As atoms from the GaAs substrate to the ZnO thin films. Photoluminescence (PL) measurement reveals that the improved qualify of ZnO thin films is acquired at the growth temperature of $400^{\circ}C$. It is ZnO film grown at $100^{\circ}C$ that shows the change from n-type to p-type by the thermal treatment. Measured carrier concentration in the film is changed from $-5.70{\times}10^{13}\;to\;9.09{\times}10^{18}$.

• 대한전자공학회논문지SD
• /
• 제46권2호
• /
• pp.9-14
• /
• 2009

본 연구에서는 sapphire 기판위에 P (phosphorus) 도핑된 ZnO 박막을 제작한 후, 산소 분위기에서 후열 처리 온도가 박막의 전기적 및 광학적 특성에 미치는 영향에 대해서 조사하였다. XRD 측정 결과, 후열 처리 온도에 무관하게 모든 박막이 c축 배향성을 나타내었다. Hall 측정 결과, $850^{\circ}C$에서 후열 처리한 박막에서만 p형 전도 특성이 관찰되었다. 이때의 홀 캐리어 농도와 홀 이동도는 각각 $1.18{\times}1016cm^{-3}$과 $0.96cm^2/Vs$의 값을 나타내었다. 저온 PL 측정 결과, $850^{\circ}C$에서 후열 처리한 박막의 경우 p형 특성을 나타내는 상당량의 억셉터가 관련된 A0X (3.351eV), FA(3.283eV) 및 DAP (3.201eV) 피크가 관찰되었다. 향후 P 도핑된 ZnO 박막의 공정 조건과 후열 처리 조건을 최적화시킨다면, 차세대 광소자에 응용될 수 있는 매우 유망한 재료로 주목받을 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.883-888
• /
• 2007

Investigation of improving the properties of UV detector which uses the wide bandgap of ZnO are under active progress. The present study focused on the design and fabrication of i-ZnO/p-inversion $layer/n^--Si$ Epi. which is characterized with very thin p-type inversion layer for UV detectors. The i-ZnO thin film for achieving p-inversion layer which was grown by RF sputtering at $450^{\circ}C$ and then annealed at $400^{\circ}C$ in $O_2$ gas for 20 min shows good intrinsic properties. High (0002) peak intensity of the i-ZnO film is shown on XRD spectrum and it is confirmed by XPS analysis that the ratio of Zn : O of the i-ZnO film is nearly 1 : 1. Measurement shows high transmission of 79.5 % in UV range (< 400 nm) for the i-ZnO film. Measurement of $V_r-I_{ph}$ shows high UV photo-current of 1.2 mA under the reverse bias of 30 V.

• 한국진공학회지
• /
• 제18권4호
• /
• pp.296-301
• /
• 2009

ZnO에 대한 박막증착 연구를 위하여 유도결합 플라즈마 원자층박막증착(inductively coupled plasma assisted atomic layer deposition: ICP-ALD) 장치를 제작하고, 장치에 대한 기본 공정조건을 설정하기 위하여 플라즈마를 유도하지 않은 상태에서 p-type Si(100) 기판 위에 ZnO 박막을 증착하는 다양한 실험을 수행하였다. Zn 전구체(precursor)로는 Diethyl zinc [$Zn(C_2H_5)_2$, DEZn]를, 반응가스(reaction gas)로는 $H_2O$를, 캐리어(carrier) 및 퍼지가스(purge gas)로는 Ar을 사용하였다. 기판온도 $150^{\circ}C$에서 DEZn, $H_2O$, Ar의 공급시간을 변화시켜가면서 자기제한적 표면반응(self-limiting surface reaction)에 의한 박막성장조건을 성공적으로 유도하였다. 기판온도를 변화시켜가면서($90{\sim}210^{\circ}C$) 증착실험을 반복하여, 본 장치에 대한 ALD 공정온도(thermal ALD process window)를 확립하고 성장된 ZnO박막에 대한 증착특성, 결정성, 불순물 및 내부조성비등을 조사하였다. ALD 공정온도는 기판온도 $110{\sim}190^{\circ}C$로써 이 구간에서의 박막 평균증착률은 0.29 nm/cycle로 일정하게 나타났다. 기판온도가 높아질수록 결정성이 향상되어 ZnO(002) 피크가 우세하였다. 모든 ALD 공정온도에서 Zn와 O로만 구성된 고순도의 ZnO 박막을 실현하였는데, 온도가 높아질수록 Zn와 O의 비가 1에 근접하며 안정된 hexagonal wurtzite ZnO 구조의 박막이 성장되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.68-69
• /
• 2007

We have prepared p-type ZnO:Al films in pure oxygen ambient on n-type Si (100) and homo buffer layers by RF magnetron sputtering system. Hall effect measurement shows that the film annealed at $600^{\circ}C$ possesses p-type conductivity and the film annealed $800^{\circ}C$ does not. PL spectra show different properties of p- and n-type ZnO film. The corresponding peaks of PL spectra of p- and n-type show at about same positions. The intensities of high photon energy of n-type film on buffer shows decreasing tendency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.408-409
• /
• 2007

Al-doped p-type ZnO films were fabricated on n-Si (100) and homo-buffer layers in pure oxygen at $450^{\circ}C$ by RF magnetron sputtering. Target was ZnO ceramic mixed with 2wt% $Al_2O_3$. XRD spectra show that the Al-doped ZnO thin films have ZnO crystal structure and homo-buffer layers are beneficial to Al-doped ZnO films to grow along c-axis. Hall Effect experiments with Van der Pauw configuration show that p-type carrier concentrations are ranged from $1.66{\times}10^{16}\;to\;4.04{\times}10^{18}cm^{-3}$, mobilities from 0.194 to $2.3cm^2V^{-1}s^{-1}$ and resistivities from 7.97 to $18.4{\Omega}cm$. P-type sample has density of $5.40cm^{-3}$ which is smaller than theoretically calculated value of $5.67cm^{-3}$. XPS spectra show that O1s has O-O and Zn-O structures and A12p has only Al-O structure. P-ZnO:Al/n-ZnO:Al junctions were fabricated by magnetron sputtering. V-I curves show that the p-n junctions have rectifying characteristics.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.575-579
• /
• 2008

Al-doped p-type ZnO films were fabricated on n-Si (100) and homo-buffer layers in pure oxygen at $450^{\circ}C$ of by RF magnetron sputtering. Target was ZnO ceramic mixed with 2 wt% $Al_2O_3$. XRD spectra show that the Al-doped ZnO thin films have ZnO crystal structure and homo-buffer layers are beneficial to Al-doped ZnO films to grow along c-axis. Hall Effect experiments with Van der Pauw configuration show that p-type carrier concentrations are ranged from $1.66{\times}10^{16}$ to $4.04{\times}10^{18}\;cm^{-3}$, mobilities from 0.194 to $2.3\;cm^2V^{-1}s^{-1}$ and resistivities from 7.97 to $18.4\;{\Omega}cm$. p-type sample has density of $5.40\;cm^{-3}$ which is smaller than theoretically calculated value of $5.67\;cm^{-3}$. XPS spectra show that Ols has O-O and Zn-O structures and Al2p has only Al-O structure. P-ZnO:Al/n-ZnO:Al junctions were fabricated by magnetron sputtering. V-I curves show that the p-n junctions have rectifying characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.510-513
• /
• 2003

Our Zn diffusion into n-type $GaAs_{0.40}P_{0.60}$ used ampoule-tube method to increase IV. N-type epitaxial wafers were preferred by $H_2SO_4$-based pre-treatment. $SiO_2$ thin film was deposited by PECVD for some wafers. Diffusion times and diffusion temperatures respectability are 1, 2, 3 hr and 775, $805^{\circ}C$. LED chips were fabricated by the diffused wafers at Fab. The peak wavelength of all chips showed about $625{\sim}650\;nm$ and red color. The highest IV is about 270 mcd at the diffusion condition of $775^{\circ}C$, 3h for the wafers which didn't deposit $SiO_2$ thin films. Also, the longer diffusion time is the higher IV for the wafers which deposit $SiO_2$ thin films.